Categories
Concrete

How to apply oil to an electric shaver

How to apply oil to an electric shaver

Electric razors require lubrication to allow them to perform at their very best.

It is not a good idea to drag a dull, dry razor across your face or neck.

In order to avoid irritation that can come with an non-lubricated razor, it is important to oil the blades and foils after every shave.

This may sound tedious, but it is essential up-keep that your skin will benefit from.

Why to Lubricate an Electric Razor?

Razors need lubrication for a number of things:

  • To stay smooth and avoid becoming dull
  • To prolong the life of all parts
  • To reduce friction and heat that can happen during usage
  • To provide a better shave – no leftover stubble or patchy hair
  • Avoids stress on the motor of the razor Types of Lubricant to Use There are a variety of lubricants on the market that can be used on electric razors.

For example, you may want to consider spray lubricants, light lubricants, and water-based lubricants.

Spray lubricants are handy to use because all you have to do is place your parts on a towel and spray.

The lubricant is generally sprayed more evenly using this type because the spray spans wide and hits all parts.

Light lubricants contain less oil and are easy to distribute on the parts, but you have to do so by hand. Additionally, they do not cause build-up on the parts which helps for cleaning afterwards.

Water-based lubricants are an option, but do keep in mind that oil-based is ideal.

Remember that each time you apply lubricant to the shaver, you must clean it well the next time after use.

Failure to clean the built-up lubricant on the blades and foils can result in the electric shaver being overloaded with grease.

How Often to Lubricate Your Electric Razor?

Lubrication should be applied to the blades after each use. However, you can do it at a minimum of two times per week.

Depending on how often you shave should be a good indicator of how often you should lubricate the blades and other parts.

It does not hurt to rub on some lubricant because it cannot hurt the razor. Some creams and gels can actually dry out the blades and foils, so adding lubricant after each wash can prevent this from occurring.

How to Lubricate the Razors Properly?

Lubricating the razors depends on what kind of lubricant you have purchased. Before applying any lubricant, clean out the device first.

This means shaking out or brushing out hair, dead skin, or any other dirt particles that have found their way into the electric razor. Once this is done, you can get started.

You do not want to apply lubricant over built-up stubble and grime, which is why it is so important to clean the razor out prior to oiling it.

If you are using spray lubricant, grab a towel and lay all the parts you want to lubricate of the razor on the towel; this requires taking apart all the main pieces of the razor.

Next, you want to spray the lubricant a few inches away from the parts and evenly coat.

Spraying the lubricant should be done carefully and without holding the nozzle on a certain area for an extended amount of time.

If you are concerned about the distribution and whether you are not reaching all the tiny areas of the pieces, put the parts back together and turn the razor on for a few seconds.

This is actually recommended by the companies who manufacture the razors, and it can help push the lubricant around all the parts.

With oil or water-based lubricant, grab a towel and lay out the parts, apply lubricant thoroughly and massage in with hands or use a soft-bristle brush to do so.

I recommend dabbing a bit of oil on either side and in the middle, this ensure that the entire part is covered.

Do not use a brush on the foil pieces, as the bristles can be too harsh for the delicate foil.

When rubbing in lubricant with the hands, be careful to not cut yourself; you may want to wear gloves while you do this. Lubricants to Avoid Not all lubricants are created equal.

The one lubricant you want to avoid is WD-40 because it is not the best for razors, and designed for more household or vehicle related lubrication jobs.

Additionally, olive or coconut oil are not suitable because they are ideal for cooking or cosmetic usage.

It is best to find a razor that comes with lubricant already, but if not, select one that you feel will work best for the razor you own.

What to Use in Addition to Lubricant Some individuals may wish to disinfect their shaver before lubricating it. This is entirely ok, but harsh disinfectants should not be used.

Essential oils are great options for cleaning the razor and freshening it up before lubricating it.

Furthermore, essential oils mix well with most lubricants due to their all-natural components.

Lubricant is a simple product that plays a huge role in maintaining an electric razor.

Shop around and investigate the different kinds of lubricants on the market before buying one.

A lot of individuals do not know what the purpose of moisturizing their razor, what kind to buy, or even how to apply it.

This guide is designed to help answer those questions and create more aware shavers.

How to apply oil to an electric shaver

Just about every single individual uses a razor of some kind for many different areas of the body, however, all of us get tired and frustrated with the constant nicks, razor burn, and skin irritations from using the razors. Therefore, there are several who have resorted to using electric razors, and this makes it so much easier and less painful. If you are using an electric razor, it is easy to see that it is more beneficial for you and your skin. The only way to achieve these type of results, is to make sure that your electric razor is properly taken care of. After you have used it a few times, it is important to make sure that you clean and lubricate the razor head and the cutting blades, this will help you to keep an even and a very pain-free shave.

Oiling Your Electric Shaver

The first thing you will need to do is to read the instruction manual that comes with your electric shaver. This is important because you will need to be sure that you understand how to remove the razor head without damaging it, and without causing any type of injury to yourself as well. So, you will need to unplug the razor and remove the plastic cap off of the top of the razor blades. There is a head frame that covers the blades, and you will need to lift it up. After you do this, if you see a foil screen, do not touch it because it is incredibly fragile and you do not want it to break. Just by barely touching it with your fingers can cause it to tear. Take the razor brush and sweep away any of the whiskers that might be on the blades and on the foil, and you will want to be sure and soak the blades and foil once a month in some rubbing alcohol for at least one minute. Once they dry, you can put them back on the electric shaver. This is a way to disinfect them, so they are safe to use. You will then need to use a lubricant to spray the blades that are exposed foil and blades, then you can add a few drops of baby or mineral oil onto the blades and the foil. You do not want to use oils that are too heavy, such as motor oil or olive oil. After you have succeeded with the oil cleaning, you can then snap the head frame back into place on the electric shaver, plug the razor in, and turn it on and let it run for a few minutes. This helps to move the oil around on the razors, and this is what helps to lubricate them.

Conclusion

In conclusion, using oil to lubricate the razors of your electric shaver is the best way to keep your razor in the best and top working condition to be able to properly shave. Using oil to lubricate your blades will help to give you the best shave, with the smoothest skin, without having to suffer any type of nicks and painful cuts, and to keep your shaver in the best shape for a very long period of time. Whenever you are ready to oil your razor blades, make sure to read your manual first to learn how to properly clean the specific type of electric razor that you have. It is always beneficial for you to be able to get the cleanest and smoothest shave when you are using your shaver.

Proper Electric Shaver Maintenance Tips

A good electric shaver can certainly be considered a worthy investment, especially if take pride in your appearance and believe in proper grooming. If you take good care of the pieces of equipment you use for shaving, you can expect them to last for a long time. This can help you save on costs as far as buying a new electric shavers is concerned. Electric shavers are also very environment friendly, because they do not generate the same amount of trash that disposable razors do. So to help you prolong your electric shaver’s life, here are some tips that you can try.

Keep It Clean

Cleaning your electric shaver after every use helps you get rid of any hair that might be stuck inside, as well as any shaving cream or gel that may be sticking to your shaver’s parts. Especially for those who have thick hair, any hair accumulating inside your shaver will cause its motor to work harder, and will cause it to break down sooner than expected. If you shave more often than others and think that a thorough cleaning is too much to do after every shave, you can try to just brush off any hair that might have gotten stuck after using it, and schedule a more thorough cleaning at the end of the week, when you have more time. To clean your razor, check your manual and see how the process is done, as there are different ways to clean electric shavers depending on the type, brand, and design. Some shavers come with their own cleaning kits to save you the trouble of trying to figure out what to use. For those with electric shavers that do not have cleaning kits coming with the package, you can use a very small brush that would be able to reach small corners and crevices between and around the blades, as well as a special cleaning fluid for electric shavers. You can also invest in electrical contact cleaner in case you find any signs of corrosion.

Keep Them Sharp

photo by esellerpro.com

” data-medium-file=”https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg?w=300″ data-large-file=”https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg?w=448″ src=”https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg?w=300&h=203″ alt=”photo by esellerpro.com” width=”300″ height=”203″ srcset=”https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg?w=300&h=203 300w, https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg?w=150&h=101 150w, https://electricshaverworld.files.wordpress.com/2015/07/2636-3.jpg 448w” sizes=”(max-width: 300px) 100vw, 300px” /> photo by esellerpro.com

Always check on your electric shaver’s blades. Not only does it help you get a cleaner shave, it also helps you to shaver in the shortest possible time. using less energy just because your shaver is able to cut the hair in just a couple of passes. Although the manufacturer and the manual may dictate how often the shaver blades should be replaced, this will also depend on the usage. Remember that those with thicker hair would need to replace the blades more often than those who have thinner beards, because the blades will get blunt more easily. The same thing goes for those whose hair grow back quickly, and for those who use their shaver for other areas of the body.

Lubricate It

An electric shaver has different parts in it that regularly rub against each other as you use it, so it is normal for parts to wear out and stop working properly sooner or later. If there is less friction however, you can prevent this from happening or delay it. Better lubrication also ensures a proper shave each time, where each strand of hair is properly cut, instead of pulled. There are different lubricants and disinfectant sprays that you can use. Just apply some lubricant on the foil after every shave, while still keeping the shaver running. If you do not want to buy special electric shaver lubricants, you can use baby oil or mineral oil as an alternative. A single drop will be enough. Of course, you should avoid using machine oil, silicone spray, motor oil, or any other oil or lubricant that is initially meant for machine use or for regular household use 🙂 This will not be good for your skin, and will emit a different smell eventually.

Keep It Dry

Your electric shaver is something that rubs against your face often, so you can just imagine just how clean it should be all the time. This is why you should always keep your electric shaver dry, especially after using it. Some parts of your shaver may also rust or corrode through constant use, and keeping your electric shaver dry may prevent this from happening too soon. Also, damp electric shavers can be a good place for bacteria to live in, which can also be a cause of skin irritation.

As long as you properly maintain your electric shaver, you can use it far longer than its expected lifespan. Not only will it help you save on updating shavers, but it will also allow you to get a cleaner and more proper shave.

Fix First, Replace second.

Because electric shavers are mechanical, there is always a chance for it to die on you without any warning. A lot of people think that just because an electric shaver has very small parts, it is hard to repair. However, this is not the case. Before thinking about buying a new electric shaver, consider having it repaired, or repairing it yourself. There are different guides that you can find online on how to fix simple problems, and you may realize that a simple repair is definitely more cost-effective than buying an entirely new one. Some electric razors can last for years, as long as you know how to diagnose issues and find solutions. Try to do a google search and you might find different solutions on how to fix electric shavers, take advantage of the resources at hand.

Use Your Warranty

Any kind of electronic equipment should always come with a warranty, and your electric shaver should be no different. These are offered by the manufacturer for a reason, so don’t pass up on the chance to take advantage of the benefits of the product. Repair and maintenance can cost you, and a good product warranty should save you from shouldering these costs, or at least from spending a whole lot more than what is necessary. Make sure that each part of the warranty clear to you, and read the fine print.

How to apply oil to an electric shaver

Pre-shave oils are usually associated with the blade & brush type of shaving, so you may be wondering what this has to do with electric razors.

And that’s a valid point, but when it comes to wet shaving with an electric razor, we can and should look at traditional wet shaving for some really useful tips.

Apart from the thing that does the actual shaving, these two mantras are extremely similar with regards to the prep work that is often treated as an afterthought and it can make the difference between a mediocre and a great shaving experience. This especially holds true for the gentlemen with sensitive skin.

A pre-shave oil was always the type of product that was regarded as useless by some and necessary by others. I guess that the Your mileage may vary saying applies here as well. So lets take a closer look at it and settle the debate.

What is a pre-shave oil?

A pre-shave oil is usually a mix of a few oils, the most widely used being sunflower, avocado, jojoba or safflower oil and it has a rather watery consistency.

It is applied prior to lathering, by massaging it into your moist skin after washing thoroughly with warm water. The idea is to cover the surface of the skin with a very thin film of oil, so a few drops will suffice.

How does it work?

Here comes the most interesting part. I’ve seen many claims about how it helps with lubrication and that it softens the hair. However, this is not how and why it works.

First of all, an oil can’t soften the hair by itself. Like I said in a previous article, the hair is covered in a very tough outer shell called the cuticle and it can only be weaken by alkaline components found in a quality shaving cream.

Also, by having a very thin consistency a pre-shave oil doesn’t do much with regards to lubrication like other oils that stick to the surface of the skin. Again, a quality shaving cream will do just that.

So what’s the catch then? Well, a pre-shave oil works by penetrating and holding the water into your skin, making it supple, plump and well-moisturized.

This greatly reduces the risks of irritation when shaving. Flaky, dry skin is much more prone to irritations and cuts, even when using an electric shaver.

It comes as no surprise that the greatest improvements are seen by those with flaky and dry, sensitive skin, by making it more pliable and “plump”.

Think of the surface of the skin when seen with a very powerful magnifying glass; the skin that lacks proper hydration and elasticity will have lots of imperfections that could cause these type of problems when shaving.

Will a pre-shave oil work for me?

Unfortunately this is another one of those situations when only experimentation can give you the answer. However, if you are a fan of wet electric shaving and you feel that there is still room for improvement in your results, even though you did all the right things, you should give it a try.

Like I said before, there are men that have seen massive improvements. But there are also cases where it didn’t seem to do anything noticeable. It’s all about you, your skin and your shaving habits.

I personally know people that can throw anything at their skin when shaving and still don’t suffer from irritation or discomfort. But since you’re reading this article you’re probably not one of them. I know I’m not.

What makes a good pre-shave oil?

Considering how it works, a good pre-shave oil will penetrate your skin and retain the moisture, as opposed to one that sticks to the surface of the skin. Also, a quality product will have natural ingredients, without stuff that can cause irritations and other unpleasant reactions.

How to apply oil to an electric shaverI can recommend the Pre-shave oil by Truefitt & Hill as it’s the only one I’ve ever used. It has a pleasant, citrusy smell and that bottle lasts a REALLY long time. I’ve shaved with and without it and for me it really seems to work.

I always get closer and more comfortable shaves when using it. There are of course other options, so feel free to choose the one that seems the best fit for you.

Hopefully this article managed to clear some of the confusion surrounding this topic. As a conclusion, for some men a pre-shave oil can really be that one thing that makes everything just a bit smoother. Or a lot smoother. Give it a try.

Home » Articles & Guides » Tips » Pre-Shave Oils and Electric Shaving—are they worth the trouble?

8 thoughts on “Pre-Shave Oils and Electric Shaving—are they worth the trouble?”

I use Art of Shaving pre shave Gel with my Panasonic Arc 5 shaver. I don’t wet my face. I shave dry, with no other products or water, and it provides a better shave for me than Lectric Shave.

That’s actually very interesting — never used the pre-shave gel from AOS, but I’ll definitely give it a try. Thank you for taking the time to share this.

I recently changed from a Philishave 7000 series to a Braun series 5, and as I have a scar on my neck form a burn in my childhood, decided to try a save oil (Face Guard). I can tell you, I have never had a closer shave in my life with an electric shaver, and it doesn’t irritate my skin at all.

Thank you for your comment, Chris. I personally never tried Face Guard, but from your experience it seems to work great.

I just purchased the Philips Norelco 7700 wet/dry electric shaver. I have used it dry and got a somewhat close shave and then I used the Art of Shaving shave cream and got a shave like a blade. However, I don’t always want to use shave cream. I was afraid to try the AOS shave oil or any others in fear that it would harm the razor. Any thoughts on this?
Thank you,
Ed

As long as you clean the shaver properly afterward and it’s a thin oil that won’t clog the razor during use (and actually have a negative impact on the quality of your shave), you’re all good.

I use King of Shave oil, on dry skin, wait 5min to soak then use my Panasonic 5 ARC electric shaver and I find it’s a quicker easier, smooth shave

Thanks for the comment, Dan, much appreciated. Haven’t personally used pre-shave oil alone (without shaving cream or gel), but might give it a shot. I still use the one from Truefitt & Hill as King of Shaves is not available where I live.

How to apply oil to an electric shaver

Cleaning an electric razor doesn’t have to be a challenge. Read Braun’s step-by-step guide and learn how to look after your shaver using Braun Clean and Renew. With these steps you can easily discover how to keep your electric shaver clean and ready to use!

1. Professional cleaning: Get new shaver feeling at the touch of a button

Some Braun Series shaver models come with a Clean&Charge cleaning device. Just push a button and it cleans, dries, and recharges your shaver automatically. So easy and absolutely hygienic.

How to apply oil to an electric shaver

2. Manual cleaning: Rinsing under running hot water

Almost every Braun shaver can be rinsed quickly and easily under running hot water. The cleaning effect can be improved by using a bit of standard liquid soap. And another tip: to give your shaver optimal care, you should put a drop of oil on the cutter block once in a while.

How to apply oil to an electric shaver

How to apply oil to an electric shaver

After removing the cutter head, the cutter block is easy to clean with the brush. When you’re done, switch the shaver on for two or three seconds. Careful: Never, ever clean the cutter foil with the brush.

How to apply oil to an electric shaver

The cleaning spray helps clean your shaver thoroughly, removing all traces of sebum. After spraying both cutter parts, the residue is easy to remove.

3. Maintaining: Keeping your razor at peak performance

For 100% performance, we recommend replacing all cutter parts every 12-18 months. After 18 months, you have shaved as many hairs as there are blades of grass on a soccer field! So it`s definitely high time to replace the cutter parts for your shaver to deliver 100% performance again. Since the cutter foil and cutter operate like the two parts of a pair of scissors, they inevitably wear out and become dull, which could increase irritation and prevent a closer shave.

How to apply oil to an electric shaver

Choose Braun Series 9. The World’s most efficient shaver. Exceptionally gentle**

Pioneering technology and performance in a class of its own – a shaver that removes hair so efficiently, your skin stays almost irritation-free.

How to apply oil to an electric shaver

Q. How do I use shaving oil?

A. “Oils are brilliant additions to your bathroom cabinet – particularly if you have facial hair to navigate, as they allow you to see where you’re shaving, allowing you to get good, clean lines around a beard, sideburns or goatee. Here’s how to get the most out of them.”

Prepare properly

Preparation is the key to a great shave, so start by softening stubble with a face wash and plenty of warm water. Better still, take a shower and let the steam do the hard work. Pat with a towel but leave stubble slightly damp.

Use sparingly

The biggest mistake men make when using shaving oil is that they use too much. Just three drops of oil is all that’s required to achieve perfect results. Drop into the palms of your hands, rub together and then massage into the skin, using gentle circular motions to ensure the stubble is adequately coated.

Keep things moist

It’s a good idea when using shaving oil to keep skin wet during your shave. This is because water acts as a carrier for the oil ensuring even coverage and making it go further – so don’t be afraid to add more water where necessary.

Get shaving

For the best possible shave, use short strokes following the direction of hair growth and rinse your razor regularly to keep the blades free from stubble. Leave areas where stubble is toughest (like above the lip) until last, as it’ll give the hair more time to soften.

Protect and survive

After shaving, rinse the skin with a little warm water and finish off by applying a few extra drops of oil to hydrate and condition skin.

How to apply oil to an electric shaver

How to shave your head with electric razor isn’t as hard as it may seem. It’s also much easier for beginners, compared to using a traditional razor. With an electric razor, there’s no real danger of cutting your scalp. However, razor burn, scalp irritation, and ingrown hairs will still be a concern. If you’re looking for the best way to achieve a smooth shave, then you’ve come to the right place. Here, we’ll go over how to cleanly shave your head using some techniques barbers use, and what type of products to use that can significantly cut down on your chances of razor burn and ingrown hairs.

Key Takeaway: How to shave your head with electric razor correctly ultimately depends on the type of electric razor you use. It’s also a matter of properly prepping the scalp prior to shaving. This will include:

  • Cutting your hair down to two inches in length with scissors
  • Using clippers to bring your hair down to stubble length
  • The next step is using your electric razor to achieve that smooth clean look.

Now that you know how easy it is to shave your head with an electric razor, read on for more tips on how to prep your scalp, what products work the best, and what type of electric razor you should use for the smoothest, cleanest shave possible.

Table of Contents

The Prepping Process

This can be a lengthy step in the process, depending on the current length of your hair. If you have hair that’s longer than a few inches then you’ll need to grab some scissors and trim your hair down to at least two inches in length.

Grab Those Hair Clippers

The next step is using clippers. Clippers will not give you the same type of smooth shave that an electric razor can. However, it can be used to get your hair down to stubble length. Most clipper sets will come with a variety of clip attachments to use, based on the length you want. Since you’ll be clean shaving your head, you won’t need to use one of these attachments. If you leave your hair longer than stubble length then this can cause scalp irritation and ingrown hairs when you try to shave with the electric razor. The goal here is to get your hair as short as possible before using the electric razor.

Once you’ve used the clippers, it’s time to rinse your head off in order to get rid of any stray pieces of hair. At this time, it’s also a good idea to check your scalp and make sure you didn’t leave any longer patches behind. You should end up with a uniformly smooth buzz cut.

The Right Electric Shaver

For this next step, you’ll need a foil or rotary electric shaver. Both options will work just fine, it will be more a matter of personal preference.

How to apply oil to an electric shaver

We recommend the Panasonic ES-LV81-K Arc5 men’s electric razor. This is a cordless electric shaver that also comes with a pop-up trimmer feature, which is perfect if you want a multitasking tool that can also take care of your beard, mustache, or sideburns. This foil razor may be easier for the beginner to use since you can easily use side to side or back and forth motions when you shave. With a rotary shaver, you need to use a circular motion in order to prevent the razor from pulling the hair and causing scalp irritation. Fortunately, this razor’s powerful motor and the pivoting head are specifically designed to smoothly glide over the scalp, allowing you to achieve a smooth shave in minutes.

The Perfect Shave

For this step, we recommend a wet shave. Many models of electric razors are approved for both wet and dry shaves. Of course, prior to use it’s important that you read the product’s user manual and ensure that the razor is one hundred percent waterproof and not just water resistant.

To begin, make sure you completely saturate the scalp in the shower or under the faucet. Starting with a wet head can help to minimize your chances of ingrown hairs and razor burn. It also helps to open up the pores, which can result in a smoother shave.

With a wet shave you can also use your favorite shaving gels, oils, or foams. Apply the shaving lubricant to your scalp, carefully working it into the scalp, evenly coating your entire head.

When shaving your head, begin with lighter or softer textured hair first. Move to the coarser areas of hair last. This will allow the shaving lubricant to have more time to soften the coarse hair follicles, resulting in a more comfortable shave.

Shaving Technique

During this time, use careful, even strokes if you’re using a foil electric razor. With a rotary razor you’ll need to use slow circular motions, slowly moving from one area to the next to prevent leaving behind any patches of hair. For the closest shave, you’ll shave against the grain, however, if you have sensitive skin this may cause irritation. Shaving with the grain will not cause scalp irritation but it also doesn’t provide the same type of smooth clean shave that going against the grain can. With each pass, feel your scalp to ensure there is no hair left behind, then rinse off the razor. Pay special attention to the areas behind the ears and at the base of the neck.

Once you’re done, take a couple of mirrors and check for any missed spots. Next, splash cold water on your scalp to close the pores and prevent razor burn and general scalp irritation.

Related Questions

How Do You Treat Razor Burn from an Electric Razor?

If your scalp feels sore or irritated, apply a small amount of coconut oil or a skin care lotion. Both types of products will promote healing and can instantly soothe any irritation. To learn more, click here to read our article on head shaving tips.

What’s the Best Way to Prevent Ingrown Hairs?

First, you need to use a high-quality electric razor and make sure the blades are sharp. Avoid going against the grain in order to minimize your chances of ingrown hairs. Additionally, it’s also important to avoid going over the same spot on your scalp over and over, which can easily lead to ingrown hairs and razor burn.

Final Thoughts

With the best electric razor for shaving head and a little practice, how to shave your head with electric razor will be a cinch. Remember, make sure you properly prep the scalp before you start shaving, use a good lubricant, and use the correct shaving technique, based on the type of electric razor you use.

Life has rules. Don’t step on the cracks in the pavement. Never disturb a wasps’ nest. Avoid eating anything in the fridge that’s crawling out on its own. These rules are there for your own protection. So here are 5 more male grooming rules.. Follow them if you don’t want to be the guy who turns up for work with bits of toilet paper stuck to his face.

Whether you’re an electric shaver novice or have been using it for a while, there are certain things you need to keep in mind to make the most of your shaving experience. Follow this step-by-step guide for a wet or dry protective shave and you will be ready with an ultra-groomed look in no time!

  • For a dry shave, first off, make sure your facial hair is not too long. Too much length will lead to yanking, leading to an uncomfortable shave, or worse, skin bumps. You want to make sure you’re donning nothing more than stubble. If required, first use a trimmer and then the shaver, both of which are built into the Philips AquaTouch S5050/06.
  • Use the shaver at a right-angle, moving against the direction of your hair growth, using circular motion. This will minimize skin irritability as well as reduce shaving time.
  • If you have the time for a wet shave, wash your face with a cleanser and plenty of warm water to soften the hair and get rid of excess oil. You can even apply an alcohol-based pre-shave product to achieve dry skin. Regular baby powder will do the trick too.
  • Next, massage some gel or foam onto your face and neck and leave it on for about 5 minutes before shaving. This will allow the stubble’s coarse lining to soften up as well.
  • Always remember to run the shaver against the grain. Use your free hand to slightly pull and tighten the skin so the hair is standing upright for a cleaner cut. Never use extensive pressure with the shaver on your skin, which may lead to irritability. The rounded profile heads of the Philips AquaTouch S5050/06 will give you a close shave without the threat of nicks and cuts.
  • Tackle sensitive areas like the neck first as shavers generate heat. Going over more delicate parts first will ensure the least amount of heat used. Avoid going over such spots repeatedly. The Philips AquaTouch S5050/06 comes with 5-direction Flex Heads with 5 independent movements for just the right amount of skin contact, especially right for sensitive areas.
  • Due to the gel or foam, the blades may have more resistance, in turn using more power. Thus, make sure the shaver has enough charge in it.
  • Clean your shaver after each use. This is one of the reasons why it’s crucial to opt for a completely waterproof electric shaver. This step will simply help in making the tool last much longer.

The Philips AquaTouch Electric Shaver is an answer to all of your major shaving problems. All you need to do is use it to its full potential!

If you are the type of person who has a habit of shaving every day or has particularly sensitive skin, you must think of adding Best Pre-Shave for Electric Razor for a Smooth Finish to your shaving. The reason behind using a pre-shave oil is simple; use just a small amount of it and it would add a great amount of lubrication and smoothness especially under the shaving cream. The advantage of using such pre-shave oils is to avoid razor burns, skin irritations, and also a very few razor bumps. These oils usually give a cleaner cut and a smooth razor glide which you would not get with using only shaving cream.

Along with giving extra lubrication, pre-shaving oil conditions moisturize your skin and also help the facial hairs to stand up. This will make your skin smoother and healthier despite the facial hairs being dragged by a sharp blade. It depends on your skin which type of beard oil suits you and beard oils and pre-shave oils both use the same kind of ingredients. Therefore, a good pre-shave oil can also work as an after-shave moisturizer.

The majority of the pre-shave oils are made to be used with great safety razors but they can work with the disposables ones too to give an improved glide and overall comfortable experience.

A little bit of this oil is enough for a smooth shave. All you have to do is take a few drops of oil and massage it on your face for almost 30 seconds (or longer if you like). Then apply your shaving cream and have a great shave. You can skip the shaving cream if you want, but it is highly recommended.

To help you get the perfect pre-shave, we have researched and found out some of the best pre-shave oils for electric razors.

  1. How to Use the Norelco Jet Clean System
  2. How to Clean an Electric Self Shaver
  3. How to Open & Clean a Norelco 1050CC Arcitec
  4. How to Clean a Philips Norelco Shaver
  5. How to Install New Heads in a Norelco Razor

How to apply oil to an electric shaver

Electric razors, including those made by Norelco, require maintenance for optimal performance. Weekly maintenance includes brushing stray hairs from the blades. Monthly the blades should be removed and cleaned to remove debris and dirt. Once the razor is thoroughly cleaned, a lubricating agent may be applied to the heads to keep them moving freely. Cleaning the razor and lubricating the heads extends the life of the razor.

Turn the wheel in the middle of the razor counter-clockwise while applying pressure. This releases the frame around the razor heads so that it may be removed.

Remove each cutter from the head by lifting it up. Set them aside.

Brush hairs from the cutters and heads using the cleaning brush.

Soak the cutter in Norelco razor cleaner or rubbing alcohol for 15 to 30 seconds. This removes dirt and oil that can affect performance. Allow the parts to air dry.

Place the cutters back into the razor. Replace the frame around the cutters.

Place a drop of mineral oil onto the razor heads or spray with Norelco razor lubricant. Carefully spread the oil or lubricant around the head using a clean finger.

Turn on the razor to distribute the lubricant through the heads.

How to apply oil to an electric shaver

If you own an electric razor, you might ask yourself, “Do You Use Shaving Cream With An Electric Razor?” Well, you can use shaving cream to shave your face and neck with an electric razor if you want a closer shave that is more like the experience of using a manual razor.

You can also use it if you’re looking for an easy way to remove hair from around your mouth or chin area without going through the process of applying lather and then shaving manually.

Table of Contents

Do You Use Shaving Cream with an Electric Razor?

Yes, you can use shaving cream with an electric razor. You don’t need shaving cream for an electric shaver most of the time, but if you are doing wet shaving, you can use shaving cream with an electric razor. While using shaving, don’t apply a thick layer of shaving cream. It can clog up the electric shaver.

How to apply oil to an electric shaver

As Most of the electric razors are used for dry shaving, you don’t need any shaving cream. However, many wet shavers are available in the market who are using aerosol shaving creams or lotions to get the perfect shave. Not every electric razor is capable of wet shaving. Make sure you buy a shaver with Aquatec Technology for wet & dry shaving. Your shaver may rust if you use shaving cream, If your electric shaver gets rusted, you should use electric shaver lubricant to clean it.

Preparation Before the Shave

How to apply oil to an electric shaver

Preparation is very important when shaving with an electric shaver. You need to ensure that you have a good quality shave and also prevent your skin from razor burn or even worse, the dreaded ingrown hairs.

A good face wash is a must before you start shaving. This will help to remove any dirt or oil from your making for an easier and more comfortable shave. This will make for a closer and more comfortable shave. Make sure the cleanser is gentle enough not to cause any skin irritation.

Apply Shaving cream to your skin. This will help to further soften the hair follicles as well as skin and will also help to soften the hair and also reduce the chances of razor burn. This will remove any dead skin cells or dirt which can clog the shaver head and make a good quality shave difficult. Make sure to apply it evenly over the entire area that you are going to shave.

How to apply oil to an electric shaver

Shave in the direction of hair growth. Shave in the same direction in which your hair is growing. If you shave in a different direction, it will make for a closer shave but also increase the chances of razor burn and ingrown hairs.

Once you are finished shaving, make sure to rinse your skin off with cold water and apply a skin moisturizer, aftershave balm or aftershave milk on the face. This will help to soothe and protect your skin. It will also help to keep your skin hydrated.

Preparation is key when it comes to shaving with an electric shaver. By following these simple tips, you can ensure a good quality shave

Following these simple tips will help you to have a closer, more comfortable shave. It will also help to prevent or reduce the chances of skin irritation and razor burn.

How to Use an Electric Shaver with Shaving Cream?

It is very simple if you want to use an electric shaver with shaving cream. First, apply the shaving cream like you would if you were using a manual razor. Make sure that your skin is lubricated sufficiently because this will help prevent any unnecessary irritation.

Next, you will want to go over the shaving cream on your face using the electric razor like you would if you were shaving with a manual razor. The only difference here is that instead of applying downward strokes, shaving in an upward direction is advisable.

This will help keep skin irritation at bay and minimize any discomfort from pulling or tugging your skin.

Why Use Shaving Cream with an Electric Razor?

There are a few reasons why it may be beneficial to use shaving cream with an electric shaver when you are pursuing that smooth, baby-soft skin that you’re hoping for after every shave.

How to apply oil to an electric shaver

First, shaving cream helps create an excellent barrier between the electric razor blades and your skin. This barrier minimizes the chances of getting razor burn or any other type of skin irritation.

Second, shaving cream can help the blades of the electric razor to glide smoothly over your skin, resulting in a closer shave.

Finally, using electric shaver shaving cream makes the whole process easier and a lot more convenient. As long as you’re using the right shaving cream with your electric shaver, this method should make it easier to achieve smooth skin and avoid any unnecessary discomfort along the way.

Final Thoughts

Using shaving cream with an electric shaver is easy and beneficial in a few ways. First of all, it can help prevent razor burn and skin irritation. Second, it can help the blades of the electric shaver to glide smoothly over your skin for a closer shave.

How to apply oil to an electric shaver

Finally, using shaving cream makes the whole process easier and more convenient. You are using the right electric razor cream to get the best results.

Do you have any thoughts or questions about using electric razor shaving cream? Let us know in the comments section below!

Do you need shaving cream for an electric razor?

It is not necessary to use a shaving cream or gel with your electric razor, but it is highly recommended as it will provide you with a closer shave and protect your skin from being irritated by the pulling of your hair.

What is the correct way of using shaving cream with an electric razor?

To use shaving cream with an electric shaver, apply a thin layer of cream to your skin and shave as usual. Avoid applying too much cream, as it will make it harder for the razor to glide over your skin.

What are the side effects of using shaving cream with an electric razor?

There are no known side effects of using shaving cream with an electric razor as long as you do not use too much. If you apply too much, it may cause the razor to have a harder time gliding over your skin which can be irritating and painful.

Can you shave wet hair with an electric razor?

It is not recommended to shave wet hair with an electric razor as it can cause the hair to be pulled and the skin to be irritated. If you’re looking for a closer shave, we recommend using shaving cream or gel to help protect your skin from irritation.

How to get a closer shave without irritations when using an electric razor?

For the closest possible shave, I recommend using shaving cream or gel with your electric razor. It will provide your skin with protection from irritation while still getting an incredibly close shave.

More men are grooming their beards these days, so the demand for shaving oil has also increased.

You can create your own shaving oil at the comforts of your home

Shaving oils come in a variety. There is one that you apply on your skin and one for your beard. The oil you lay on your skin is a pre-shave oil, making the whiskers or hair softer for an easier and less painful shave. Meanwhile, you use beard oil after trimming to maintain the softness and manageability of your beard.

However, there are other benefits of using pre-shave oil, which will be discussed in the article below, and a simple DIY homemade shaving oil recipe that you can make at home.

As much as possible, apply a pre-shave oil to prep your skin before shaving.

How Pre-Shave Oil Benefits You

Since a pre-shave oil works as a carrier oil, other natural oils or compounds are usually added to help clarify, tighten, and brighten your facial skin, making it youthful and wrinkle-free.

Pre-shave oils are a great addition to your shaving routine because it also moisturizes the skin deeply, ensuring a closer shave while preventing irritation and ingrown hairs. It can also contribute towards skin exfoliation, as it can essentially eliminate dead cells of the skin, leaving the skin supple and smooth to the touch.

Here are some major benefits of using pre-shave oil:

  • Facilitates closer shave
  • Builds a barrier that protects the skin from the effects of the razor, preventing over-exfoliation and irritation
  • Lowers friction and softens the facial hair
  • Ensures smoother and better glide
  • Effectively moisturizes the facial skin, ensuring a smoother shaving experience without cuts or nicks that occur due to dehydrated, dry skin
  • Prevents the chances of irritation or ingrown hairs
  • Provides benefits from the essential oils and other special oils used in making the pre-shave oil
  • Provides nourishment to the skin, making it smooth as well as supple after shaving.

Here is a YouTube video to learn more about the benefits of pre-shave oil.

Moreover, how do you clean an electric razor?

How to clean an electric shaver (step by step)

  1. Remove most of the hairs from the shaving head.
  2. Apply a bit of water to the shaving head, then pour a few drops of liquid soap over the foils/combs.
  3. Turn the shaver on.
  4. With the shaver still running, rinse the head generously with warm tap water.

Similarly, how do I clean a Panasonic lv65? Panasonic ESLV65-S Arc 5 Snap the foil back on to the shaver, pour a little liquid soap on the foils, add some water and press and hold the ON/OFF button for more than 2 seconds. This will activate the cleaning mode. After 20 seconds, the shaver will automatically turn off.

In this regard, can I use rubbing alcohol to clean my electric razor?

Dampen a cloth, Q-tip, or cotton ball with a little rubbing alcohol and apply to the blades and razor after you dry brush and clean. The alcohol will help kill any lingering bacteria and keep your electric razor clean and sanitary.

How do you use a Panasonic shaver?

How To Use Panasonic Wet Dry Shaver

  1. Step I: Cut Your Hairs Shorter. Start off by trimming your hairs shorter.
  2. Step II: Soak Your Hair Or The Portion To Be Shaved. Next, move on to soak your hair or the portion of your skin to be shaved.
  3. Step III: Apply Some Shaving Foam. As part of preparing for shaving, you have to apply some shaving foam on the hair.

Using traditional razors lets you lather as much shaving foam as you like and let your hair soften before you can shave. This allows you to effortlessly shave even the most coarse beard growth. Electric shaving with an electric razor or electric shaver that has no exposed blades lets you shave without the tiniest of cuts.

Wet electric shaving lets you get the best of both worlds and provides a painless shaving experience with the convenience and smoothness of using shaving creams. Wet electric shaving is, therefore, the perfect transition you might need in case you are skeptical about using electric shavers.

But, even with the best electric wet shaver, you might not experience the desired results if you do not choose the right shaving cream. You cannot pick a dense shaving foam or a richly lathering shaving cream that works wonders with traditional razors. The criteria to focus on, while buying shaving cream, change when you have to use an electric shaver.

There are both foil shavers and rotary shavers that let you use shaving creams to prepare your skin and beard. This comes handy for people who have skin that becomes dry or inflamed after shaving.

Shaving creams can provide the necessary lubrication that prevents friction of the shaving heads against the skin. They can soften the hair and allow your shaver to work even on the toughest beard growth. To enjoy all the benefits that a shaving cream offers here are the 7 best shaving cream for wet electric shaver:–

List of Top Shaving Cream for Wet Electric Shavers For Men in 2020

  1. MARLOWE. Shave Cream with Shea Butter & Coconut.
  2. Aramis Lab Series for Men Electric Shave Solution.
  3. Brickell Men’s Smooth Brushless Shave Cream for.
  4. Pacific Shaving Company Natural Shaving Cream -.
  5. Gillette PURE Soothing Shaving Cream with Aloe.
  6. OPR’s Sandalwood Shave Soap is a Soothing.
  7. Pre Shave After Shave Lotion Cream Best For.

A Quick Comparison: Our Top Shaving Cream Picks For Electic Shavers in 2020

Product Key trait Scented/unscented Primary ingredients Rating
MARLOWE. Shave Cream with Shea Butter & Coconut Oil Conditioning formula to soothe the skin A blend of aloe, citrus and woody scents Extracts of- Green tea, passionflower, willow bark, deep-sea algae Ease of use – 5/5
Value – 4.5/5
Aramis Lab Series for Men Electric Shave Solution Pre-shave lotion that doesn’t need rinsing Unscented Coco caprylate, vitamin, Kola nut extract, Chamomilla Recutita, and others Ease of use – 5/5
Value – 4/5
Brickell Men’s Smooth Brushless Shave Cream

Detailed Reviews of Best Electric Razor For Long Stubble

1. MARLOWE. Shave Cream with Shea Butter & Coconut. – For Sensitive Skin

  • SOOTHE & PROTECT FOR A CLOSER SHAVE: A conditioning men’s shaving cream with Shea.
  • SMELL FRESH: Our shaving cream is lightly scented with a clean balance of aloe and.
  • NO BAD STUFF & MADE RIGHT HERE: Paraben and phthalate-free, not tested on animals.

Using a shaving cream with natural extracts would be the best thing to do for your skin. Wet electric shaving is particularly popular among men who have sensitive skin. This cream is particularly focused on sensitive skin and is gentle with its skin revitalizing ingredients.

For reducing the inflammation and redness that occur post-shaving this one contains willow bark extracts. The deep-sea algae extracts in it then soothe any skin irritation that occurs from using an electric shaver or when you go against the grain.

To ensure that the skin doesn’t feel dry after a clean shave routine this cream comes with passionflower extracts for moisturization.

It forms a thin barrier on the skin the moment you apply the cream. The smooth foam it forms allows the electric razor to glide without trouble.

How to Use?

Use this cream post-cleansing of the skin. Massage a little amount on to your beard and work your way around to reach the skin. Use your electric shaver as you normally would and then rinse the cream off.

An eyebrow razor is a handy tool that you can use to shave your mustache. You can use it on the upper lip and mustache. However, be sure to use a quality blade and follow the directions carefully. Make sure to wet the mustache area first so that the hair does not stick to the skin. This can be done with a wet cloth, water, rubbing alcohol, or even a shower. If you’re not sure which method to use, consult a dermatologist first.

Once you have soaked the area with the makeup remover, you’re ready to shave. The first step is to hold the eyebrow razor at a slight angle to remove the hair. After shaving, use a tweezers to pluck any stray hairs that have popped up. After shaving, use a spoolie to brush back your brows.

You can use an eyebrow razor on the top lip

Both kinds of razors work for the job. If you choose to use a sharp razor, it’s important to be patient. You don’t want to end up with a nick. If you want to achieve the smoothest look, you can use an eyebrow razor on your upper lip. It won’t make the mustache look worse.

Another option is to shave your mustache with an eyebrow shaver. You can purchase an eyebrow shaver online or from a local retailer. The only difference is that you can shave your mustache with eyebrow shavers or a facial shaver. These razors will allow you to shave your mustache with great care. Just be sure not to rush through this process because it can lead to skin irritations or nicks.

How to apply oil to an electric shaver

A mustache razor is a handy tool to shave the top of your mustache

It can help you get rid of peach fuzz on your mustache. You can also use an eyebrow razor to shave your mustache if you don’t want to remove it. The best option for trimming your mustache is to practice with a pair of scissors and an eyebrow shaver.

The best way to shave your mustache is to use a good razor. A quality mustache razor can help you achieve a clean, well-groomed look. It is ideal for trimming eyebrows and mustaches. In addition to mustaches, it is also useful for sideburns and beards. It is shaped like an eyebrow and is ideal for achieving precise results.

Using an eyebrow razor is an effective way to trim your mustache

While it does not last as long as tweezing, it can eliminate peach fuzz and make foundation application more even. Electric facial shavers are also an excellent option if you have a mustache. They are battery-operated and are gentle on the skin. They are also an excellent option for shaving an unwanted’stache.

Before shaving your mustache, make sure to use a razor that is designed for facial hair. You can purchase a special mustache razor that is designed for this purpose. You can use a mustache razor for trimming eyebrows and sideburns, and if you’re comfortable with the design, you can use it for other parts of your face. If you’re not sure which blade to use, you can try YouTube videos for shaving your mustache.

When not to use an eyebrow razor on your mustache

Using an eyebrow razor on your mustache can be risky. The blade is too close to the skin on your face, and you can cause ingrown hairs or skin reactions. It’s best to use a safety razor. Keeping your mustache clean is essential, so avoid shaving it with an electric razor. The most popular brands are Merkur, Panasonic, and Braun. There are also other styles of electric facial shavers available on the market.

An eyebrow razor is a smaller version of an electric razor. It is generally used for shaving lips and eyebrows. Its blade is a rectangular-shaped one, but you can find those that are square-shaped or rectangular as well. An eyebrow razor is not a mustache shaver for your lip, but it can be used on the upper lip. If you’re concerned about the size of the blade, use a spoolie to brush your eyebrows upward and outward.

A mustache razor is a great home tool for shaving your mustache

There are several upgraded versions of the disposable Tinkle style available, and you can even get one that has an electric trimmer. You should only use it if you have light vellus hair on your mustache, which is akin to peach fuzz. To avoid ingrown hairs, use a gentle gliding motion, but be careful when touching your eyebrows.

To keep your mustache clean and shaved, apply facial oil to make sure the blade glides smoothly over your skin. Using shaving gel is a good idea, as it will prevent you from nicking your skin while shaving. Also, make sure to use it on stray hairs under your brows. Having a clean shave is important for keeping your mustache looking nice.

Before you begin, be sure to clean and prepare your mustache

This means applying facial oil to your face before you start. It will make the razor glide easily across your skin, and it will prevent any smudging or nicking. Always make sure to brush your mustache before shaving it to prevent causing a mess. Once your mustache is clean and ready for shaving, you can start shaping it.

When shaving your mustache, you should apply facial oil before you use your eyebrow razor. The facial oil will also make the razor glide smoothly over your skin. Don’t be too aggressive with the hair removal process. The hair will grow back, but it can take six to eight weeks for your mustache to look perfect. Everyone’s hair grows at different rates, so if you’re trying to shave your mustache, follow these simple tips to get a smooth, clean shave.

Apply facial oil to your face

After you’ve defined the shape of your mustache with a mustache razor, you should apply facial oil to your face. The facial oil will help the shaver glide smoothly over your skin, and will help you avoid nicks while shaving. After shaving, make sure you clean up any stray hairs, too, and don’t forget to rinse your face afterward. Then, reapply any hair gel you’ve applied to your face.

Before you start shaving, you should first determine the shape of your mustache. Once you’ve done this, you should start applying facial oil to your mustache. The oil will help the razor glide smoothly over your skin. You should also wipe away any stray hairs under the brows before you shave. Then, you’re all set to start shaving! If you’re unsure of how to shape your mustache with an eyebrow razor, follow these tips to get a clean mustache.

How to apply oil to an electric shaver

Use a shaving gel

Next, you should use shaving gel to prevent the hair from sticking out. While this is not necessary every time, it will help you avoid nicks. Aside from that, it will help you create a sharp outline for your eyebrows. A good shaver will also help you clean up any stray hairs that may be on your mustache. If you aren’t confident with shaving your mustache, an eyebrow razor may be the right tool for you.

Another essential step to shave your mustache with an eyebrow razor is to define the shape of your eyebrows. To do this, you should apply facial oil to your skin and then trace the outline of your eyebrows. You can then use a shaver to remove the remaining hairs. The last step to shave your mustache with a mustache blade is to shave your mustache in sections.

Conclusion

A mustache razor can be used to shave any part of your face. However, you should use it with care to reduce the risk of nicks and irritations. A mustache razor is the perfect tool for shaving your mustache if you’re trying to shave it for the first time. It can also be used to shape a mustache. When using a mustache razor, be sure to apply some facial oil to the skin beforehand.

By Allen Benedict Castillo | Submitted On August 12, 2010

The use of mens electric shavers in itself is already an environment friendly choice, since unlike disposable razors that you discard after each use, the electric razor can be used over and over and can last a lifetime.

Yet, you can go a mile further with your mens electric shavers and with taking care of the environment. Almost everything now is about going green, or using natural organic materials, that is why even the most personal tasks (including shaving) are now siding with Mother Nature. Using olive oil as a lubricating substance, instead of using commercial shaving foams or creams, is now what many people do not just because olive oil has healthy properties but also because it tends to be less expensive than using commercial shaving lubricants.

In this article you will learn how to shave using olive oil. Here are the steps to have a better result when using olive oil for shaving with an electric razor.

Choose your oil. Not all oil of olives is the same. Certain types of olive oils is meant for cooking. Others are meant for ingredients in certain solutions. Make sure you are using virgin olive oil only, particularly the extra virgin type, since other types have undergone chemical processing and would no longer be 100% organic.

Lubricate your skin with the oil. Pour some oil into a container, dip your fingers into the oil, then rub your oily fingers gently onto your skin. This is done to lubricate your skin and prevent yourself from nicking or cutting yourself while shaving. Since olive oil moisturizes your skin, there is no need to put aftershave after shaving.

Start shaving. Apply a liberal amount of oil on skin areas you will be shaving. The oil will make those areas have a slicker surface. Then use your electric razor to shave the desired areas.

If you think your skin is too dry, then put on more oil after shaving; that is, use it as an aftershave. It is ill advice to use commercial products and lotions because they usually have parabens as an ingredient. This chemical has been identified as a potential carcinogen or cancer-causing substance.

Begin and end with olive oil. Once you are done, immerse the blade of your razor in oil. It is better to use olive oil than water if you clean it. Without the film of oil protecting the blade, the unpreserved finish will cause the razor to rust and tarnish more quickly, which means the blade will go blunt faster. You can even use olive oil to clean and maintain your electric shaver. Simply soak the razor blade in oil, then wipe off the hairs with a clean cloth or a piece of bathroom tissue.

Through these tips, you will surely have an all-natural, Mother-Nature-friendly shaving routine with your mens electric shavers. You can even share these tips with your friends and family members. Who knows, even the simplest acts may result in even bigger help for the environment.

It is given that women do have lots of ceremonies to do in order to make themselves attractive and presentable for everyone. There comes the brush, the makeup, and all the accessories they wear just to provide the people with a good impression. It is always the way you take care of yourself and what you use in doing it.

Just like women, men do have their own ways on maintaining their good and clean image.

Ok that’s good, let’s get to the electric shaver stuff…

Electric shavers are known to be one of the necessities of men. This is one important object that every man needs in his daily lives. Keeping yourself look groomed and presentable all the time is extremely important especially these days where many people are used to judge others on how they look. Since razors are not disposable, you can use it any time you feel like using it. It can last depending on how you take care of it and what brand you prefer to buy.

There are lots of brands that you can encounter when you go shopping for your electric shaver. Suppose that you purchased the most expensive one, you surely would like to make it last longer than the usual so you will look for ways on how to take care of it in a proper way.

No matter how much you take care of your electric razor, there will come a time that it will work a little bit brittle unlike what you experienced the first time you used it. This is understandable because razor blades are being used over and over again and it is normal if they become dull and less efficient.

With that, you may ask yourself:

How can I sharpen an electric shaver?

Try toothpaste. Yep it works:

One recommended way of sharpening your electric shaver is by using toothpaste. Using toothpaste as your sharpening material is ideal because you probably have it inside your home already so there is no need for you to buy some of it, which could be inconvenient.

Together with the toothpaste, you will also need water and baby oil for the sharpening process.

  1. The first thing you need to do is clear all the bristles with a small brush. Look for tiny hair strands that get stuck in your blades and have them removed.
  2. After removing all hair residues, apply the toothpaste to the blade area and razor screens. Make sure all areas are covered up with toothpaste then turn the shaver on. This will help you on scattering the toothpaste all over area that needs to be sharpened.
  3. After that, remove the blades and rinse them with warm water making sure that all substance is washed away. Dry it for a few seconds and then drop a small amount of baby oil before putting your electric shaver back together.
  • Try using regular toothpaste instead of stuff like “extreme whitening” and the like, since those toothpastes have larger “gritty particles” and it won’t be as effective in cleaning/sharpening.

Get the most from your electric razor with these tips

How to apply oil to an electric shaver

1. Be Prepared

Unless you’re using one of the new breed of wet and dry shavers – which can be used with or without water – you’ll get much better results from an electric shaver if your stubble is bone dry and stiff. To make sure it’s free of dirt and sebum (the skin’s natural oil) use an alcohol-based pre-electric shave product. Most are formulated with ingredients like vitamin E, ensuring that your skin is protected and irritation is kept to a minimum.

How to apply oil to an electric shaver

2. Get the Angle Right

Hold the shaver at right angles to your face, and use your free hand to pull your skin taught as you shave so the hairs stand upright. This will ensure maximum contact with the skin, reduce shaving time and minimise snagging. Foil shavers work best using just back-and-forth strokes, while rotary shavers should also be used with circular motions.

3. Keep Cool

Due to the fact that they’re motorised, most shavers generate a degree of operational heat – bad news for sensitive skin as it can cause irritation. Always tackle the sensitive areas like the neck first while the shaver is still cool. Press lightly and don’t go over the same spot repeatedly.

4. Give it Some TLC

Shavers are like cars: they perform better if properly maintained and any worn out parts are replaced. Many now come with their own cleaning systems. If yours does, use it. Not only will it help to deliver a better shave, it will prolong the product life, too. Use the cleaning brush provided to remove any whisker dust from the cutters and foil after each shave but be gentle as these parts are delicate and easily damaged. Never tap the shaver on the edge of the sink to remove residues.

If you’re using a foil shaver, the foil will need replacing every 1–2 years, depending on the toughness of your stubble. Most men neglect to do this, and if you do you’ll end up pressing harder to get a decent shave and irritate the skin in the process. Details of replacement parts come with the manual so make sure you keep it safe.

5. Stick With It

Patience is a virtue with any kind of shaving technique but it’s especially important if you’re a newbie to electric shaving. If you’ve been using a wet razor all your life and decide to go electric, your skin can take several weeks to adjust to the new shaving technique. Stick with it, even if you experience some mild irritation to begin with.

A Pre Shave Oil is one of the most underrated product in the men’s beard shaving regimen. With beard oils, balms, razors, and brushes getting most of the hype – These oils often get overlooked by some common shaving concerns.

The number one goal of preparation in shaving is to soften the beard hair and to make it easier to cut. A Pre shaving oil helps soften your skin, prevents it from scrapes, nicks, cuts, and moisturizes your facial hair for a seamless shaving experience.

A few drops of good, light, and natural lubricating oil work like a charm, no matter if you have a soft or rigid beard. But is it necessary to use Pre-Shave oil? Does it really prep your skin and help migrate common shaving concerns?

What is Pre-Shave Oil?

How to apply oil to an electric shaver

As the name suggests, a Pre-Shave oil is applied to your face before the shaving application. It is made of natural ingredients that prepare your skin, takes seconds to apply and the results are worth your extra time.

Some of the highlighted ingredients include essential oils such as Grapeseed, Avocado, Jojoba, Argan, Marula, and Sandalwood Oil. These oils are carefully blended to offer maximum effectiveness, before and after the shave.

Why Use Pre Shave Oil?

There are many reasons why you should use a pre shave oil, some of which are listed below:

  • It leaves your face moisturized and condition
  • It can be used as a base for lathering
  • Helpful for ultra-sensitive skin
  • It offers a pain-free shave with no rashes or razor burn
  • Massaging on beard bristles creates a sleek surface for the blade to glide

Benefits of using Pre-Shave Oil

How to apply oil to an electric shaver

  1. It is a Natural Moisturizer

Pre-shave oil helps maintain the skin moisture for a successful shave. Because it is made of plant-based ingredients, using it beforehand hydrates and softens your hair follicles, offering a razor-free shaving experience.

  1. It can help Prevent Razor Burn

Ingrown hair and razor burns can be quite uncomfortable. But these common shaving issues are solved with Pre shave oil. When used properly, it actually prevents razor burn and offers a smoother, irritation-free shaving.

  1. Promotes a smooth Glide

While a pre-shave oil is not considered as a replacement to your shaving cream or gel, it can be used alongside these to offer double the benefit. It helps provide a smoother glide by sitting underneath your skin for a softer and comfortable experience.

  1. It can help Protect your Skin

A pre-shave oil reduces the chance of cuts and nicks by making your skin moisturized and hydrated. The oil greasy mixture helps offer a smoother glide no matter what type of blade you use.

  1. Multipurpose Usage

A lot of pre-shave oils are designed for Multipurpose usage. Because of the essential oils and other natural ingredients, you can use this oil as a pre-shave, aftershave, or as a beard conditioner as well.

How to use Pre-Shave Oil?

Step 1: Clean your face

First of all, you have to clean your face from any impurities before applying the pre-shave oil.

Step 2: Dispense oil into your Palm/fingers

Add a few drops of oil in your palm or fingers and rub it gently

Step 3: Massage into beard

Gently massage with your fingers on your beard. Make sure you cover the full face. Add more oil if required.

Step 4: Let it sit or Wash it

You can let the oil sit on your face and apply the shaving cream/gel on top of it or wash it and apply the cream/gel afterward.

Recommended Pre-Shave Oil

How to apply oil to an electric shaver

For those that like it original and want to give their beard a change with our fragrance-free pre-shave oil. This unscented pre-shave oil features natural ingredients such as Grapeseed, Jojoba, Marula, Argan, and Avocado Oil for a relaxing, and burn-free shaving experience. This unisex product can be used as pre-shave, aftershave, or as a beard conditioning oil.

How to apply oil to an electric shaver

Try our naturally moisturizing pre-shave oil with a soothing fragrance of Lemongrass and Eucalyptus. Our unique formula makes the oil texture too thin, making it perfect to use before and aftershave. This multipurpose oil is cruelty-free, made of natural ingredients without any preservatives. You can also use this beard oil to promote facial hair and fix a patchy beard.

How to apply oil to an electric shaver

Another great addition to our soothing pre-shave oil with sandalwood scent. This excellent unisex product comes with skin-loving grapeseed, avocado, and marula oil. Take a few drops of this pre-shave oil and use it before or after shaving. It also works great with shaving butter.

How to apply oil to an electric shaver

Yet another great product in our Pre-shave oil lineup with Geranium and Lavender Scent. Apply this beard shave oil for a non-irritant and soothing shaving. Excellent for someone who has sensitive skin, this oil can be with all types of razors.

Frequently Asked Questions

What does Pre-Shave Oil Do?

As the name suggests, pre-shave oil prepares your beard before shaving. The use of essential oils hydrates your skin and protects it from razor glide and burn.

Is Pre-Shave Oil Worth It?

If you’re experiencing razor burn or your beard hair is very rigid, a pre-shave oil can offer a consistent shaving experience. Its multipurpose usage allows it to work as a pre-shave oil, post-shave oil, and as a beard conditioner.

Can I use Pre-shave oil with shaving cream?

Because a pre-shave oil is made of natural ingredients, you can use it with shaving creams, gels, and beard butter. For best results, leave the oil on your skin and then use shaving cream on top of it.

Can we use pre-shave oil as a conditioner?

If your pre-shave oil consists of natural ingredients like essential oils, you can use it as a beard conditioner as well.

ABOUT THE SHOP

Plant-based, vegan & gluten free henna hair dye, natural beard dye & beard grooming. Sulfate-free argan shampoos & paraben free conditioners. Color, condition & cover grays naturally!

SHAVE SECRET SHAVE OIL – 18.75 ml

Shave Secret Shaving Oil provides what we believe is the most comfortable, smooth and close shave ever! It dramatically reduces shaving rashes, nicks, cuts, ingrown hairs and shaving bumps. Shaving bikini lines is a breeze. Shave Secret takes the place of all shave creams, soaps and gels. Shave Secret can be used in place of aftershave lotions, moisturizers and after shave balms.

Shave Secret is a 100% natural proprietary blend of multiple seed and nut base oils (no peanut), steam distilled essential oils, pharmaceutical grade menthol and vanilla tea oil. The base oils are high in emollients that calm, soothe and nourish to replenish the moisture in your skin. The European and Indonesian essential oils used are of the highest quality and not blends of lesser grade oils and have absolutely no fillers. The essential oils are blended in the proper dilution into the base oils to provide enhanced comfort and protection for your skin.

How to use Shave Secret: Prepare the area to be shaved as normal in the shower or out. Apply 3-5 drops into a moist palm and massage the palms together to disperse. Then massage the palms into the area to be shaved. Re-wet your skin, rinse your razor and shave as normal. Make sure you don’t apply too much pressure as you can irritate the skin by shaving off too much of the top epidural (skin) layer. Once you have gotten used to shaving with Shave Secret you can adjust how much pressure to use while shaving. Rinse your razor often to help prevent clogging. If you feel any razor drag, add more water. Not more Shave Secret.

We find that if you apply Shave Secret and wait a minute letting the oils and moisture soak the beard, you might even get a closer more comfortable shave. This is not required but it does work if you have the time.

Shave Secret can be used with an electric razor too. Just use 1 or 2 drops into palm, massage and shave as usual.

Once you have finished your shave in the shower or out, there is no need to rinse. There’s no soapy goop to rinse! Just a nice, clean, smoothly shaved area to towel dry. Apply several drops afterwards for more conditioning and moisturizing benefits.

Why shaving oil? When you want to reduce friction on any surface, you use a lubricant to create less drag. With less razor drag there is less chance of nicks, cuts and rashes. Your beard no matter where it is, is like uncooked pasta. Hard and brittle. The oils soak into the hair which fattens and softens them. Like well cooked pasta this leads to less tensile strength thus allowing the razor to cut more easily. The oils help prevent the rusting and pitting of the blades which will make your blades last longer. In normal shaving soaps, most contain some form of salt which corrodes and rusts the blade.

Shave Secret can be used around facial hair for better trim lines as you can see where you are cutting by not covering with soap. Fade lines, hair lines, bikini lines you can trim with confidence.

How to apply oil to an electric shaver

Leave a Review

Shave Secret Shaving Oil provides what we believe is the most comfortable, smooth and close shave ever! It dramatically reduces shaving rashes, nicks, cuts, ingrown hairs and shaving bumps. Shaving bikini lines is a breeze. Shave Secret takes the place of all shave creams, soaps and gels. Shave Secret can be used in place of aftershave lotions, moisturizers and after shave balms.

Shave Secret is a 100% natural proprietary blend of multiple seed and nut base oils (no peanut), steam distilled essential oils, pharmaceutical grade menthol and vanilla tea oil. The base oils are high in emollients that calm, soothe and nourish to replenish the moisture in your skin. The European and Indonesian essential oils used are of the highest quality and not blends of lesser grade oils and have absolutely no fillers. The essential oils are blended in the proper dilution into the base oils to provide enhanced comfort and protection for your skin.

How to use Shave Secret: Prepare the area to be shaved as normal in the shower or out. Apply 3-5 drops into a moist palm and massage the palms together to disperse. Then massage the palms into the area to be shaved. Re-wet your skin, rinse your razor and shave as normal. Make sure you don’t apply too much pressure as you can irritate the skin by shaving off too much of the top epidural (skin) layer. Once you have gotten used to shaving with Shave Secret you can adjust how much pressure to use while shaving. Rinse your razor often to help prevent clogging. If you feel any razor drag, add more water. Not more Shave Secret.

We find that if you apply Shave Secret and wait a minute letting the oils and moisture soak the beard, you might even get a closer more comfortable shave. This is not required but it does work if you have the time.

Shave Secret can be used with an electric razor too. Just use 1 or 2 drops into palm, massage and shave as usual.

Once you have finished your shave in the shower or out, there is no need to rinse. There’s no soapy goop to rinse! Just a nice, clean, smoothly shaved area to towel dry. Apply several drops afterwards for more conditioning and moisturizing benefits.

Why shaving oil? When you want to reduce friction on any surface, you use a lubricant to create less drag. With less razor drag there is less chance of nicks, cuts and rashes. Your beard no matter where it is, is like uncooked pasta. Hard and brittle. The oils soak into the hair which fattens and softens them. Like well cooked pasta this leads to less tensile strength thus allowing the razor to cut more easily. The oils help prevent the rusting and pitting of the blades which will make your blades last longer. In normal shaving soaps, most contain some form of salt which corrodes and rusts the blade.

Shave Secret can be used around facial hair for better trim lines as you can see where you are cutting by not covering with soap. Fade lines, hair lines, bikini lines you can trim with confidence.

Panasonic shaver review Using mens electrical shavers in by itself is currently an surroundings pleasant selection, considering that not like disposable razors that you just discard after every use, the electric razor may be used above and through and might very last a lifetime.

Nonetheless, you are able to go a mile further more with your mens electrical shavers and with caring for the natural environment. Virtually every thing now is about likely green, or making use of all-natural organic and natural supplies, that’s why even the most exclusive projects (such as shaving) are actually siding with Mom Nature. Utilizing olive oil being a lubricating substance, in its place of applying industrial shaving foams or lotions, is now what a lot of people tend not to simply because olive oil has balanced properties but also since it tends to become cheaper than applying commercial shaving lubricants.

During this write-up you are going to study the way to shave applying olive oil. Here will be the actions to have an improved result when using olive oil for shaving with an electrical razor.

Choose your oil. Not all olive oil could be the very same. Certain types of olive oils is meant for cooking. Other people are meant for elements in specific solutions. Be sure you might be making use of virgin olive oil only, particularly the extra virgin variety, since other forms have undergone chemical processing and would no more time be 100% organic and natural.

Lubricate the skin while using oil. Pour some olive oil right into a container, dip your fingers into the oil, then rub your oily fingers gently onto the skin. This is certainly performed to lubricate the skin and prevent all by yourself from nicking or reducing oneself when shaving. Given that the olive oil moisturizes the skin, there is no have to set aftershave right after shaving.

Start out shaving electric shavers. Apply a liberal degree of olive oil on skin spots you’ll be shaving. The olive oil will make all those regions have a slicker surface area. Then use your electric razor to shave the desired regions.

Panasonic shaver For those who assume the skin is also dry, then place on far more olive oil after shaving; that may be, utilize it being an aftershave. It is sick information to work with industrial products and solutions and lotions since they typically have parabens being an ingredient. This chemical continues to be determined being a possibilities carcinogen or cancer-causing substance.

Start and finish with olive oil. After you happen to be performed, immerse the blade of your respective razor in olive oil. It is greater to employ olive oil than h2o if you thoroughly clean it. Devoid of the movie of oil guarding the blade, the unpreserved finish will bring about the razor to rust and tarnish extra swiftly, which means the blade will go blunt speedier. You may even use olive oil to scrub and sustain your electrical shaver. Merely soak the razor blade in olive oil, then wipe off the hairs with a thoroughly clean fabric or a piece of rest room tissue.

By means of these suggestions, you’ll surely have an all-natural, Mother-Nature-friendly shaving schedule using your mens electric shavers. It is possible to even share these ideas together with your friends and family members. Who understands, even the easiest functions could outcome in even bigger aid for your environment.

  • Mar 30, 2018
  • #1
  • ShavinElectricity

    • Mar 30, 2018
  • #2
  • AlanTh

    • Apr 3, 2018
  • #3
    • Apr 4, 2018
  • #4
  • slybrewguy

    • Apr 8, 2018
  • #5
  • Chevyguy

    After rinsing and air drying I put a drop of mineral oil on each shaver head with the shaver running.

    Sent from my SAMSUNG-SGH-I337 using Tapatalk

    • Jun 1, 2019
  • #6
  • Flyboybob

    • Jun 4, 2019
  • #7
  • olegunnar

    • Jun 4, 2019
  • #8
  • Flyboybob

    • Jun 5, 2019
  • #9
  • Chevyguy

    A preshave like Williams Lectric Shave will lubricate your shaver when dry shaving.

    Sent from my LM-V350 using Tapatalk

    • Jun 5, 2019
  • #10
  • Flyboybob

    • Jun 7, 2019
  • #11
  • Chandu

    I Waxed The Badger.
    • Jun 7, 2019
  • #12
  • Chevyguy

    It should last more than five years. I’ve had Norelco’s go over ten before I changed out the batteries. Had a Braun Syncro that went over eight before the batteries and circuit board needed changing.

    Sent from my LM-V350 using Tapatalk

    • Jun 7, 2019
  • #13
  • Chevyguy

    There are also aerosol spray cleaners like Remington Shaversaver that will lube your razor and keep it running in top shape.

    Sent from my LM-V350 using Tapatalk

    • Jun 7, 2019
  • #14
  • Flyboybob

    It should last more than five years. I’ve had Norelco’s go over ten before I changed out the batteries. Had a Braun Syncro that went over eight before the batteries and circuit board needed changing.

    6 Tips for Shaving With an Electric Shaver

    • Post author:Chad Stewart
    • Post published: Feb 3, 2017
    • Post category:Shaving and Hair Removal
    • Post comments:0 Comments

    Electric shavers often get a bad rap for doing a poor job and/or leaving skin inflamed and uncomfortable. Most of this bad press is due to zero pre-shave preparation, not using the shaver as directed, and a lack of a proper post-shave routine to care for your face and the shaver.

    Here’s 6 tips to make your next electric shaving experience a pleasant one, rather than a nightmare!

    1. Prep is important.

    There are a number of wet/dry electrics out there, but the most popular electric shavers are still the cheap $20 and $30 varieties found at your local big box store on sale at Christmas time. While these shavers indeed get the job done, they’re not intended to be used on an unprepared face. Since you can’t use shave lotion to shave with non wet/dry shavers, you’ll need to ensure that your whiskers are bone dry, and free of dirt and skin oils.

    A quality pre-shave oil like William’s applied to a clean and dry face will net you a cleaner shave while also reducing irritation such as bumps, scrapes, and ingrown hairs. Pre-shaves are designed to stand your whiskers up without making the face or hairs moist. Make sure the one you choose contains vitamin E and tea tree oil for the best results.

    If possible, try to wash your face with soap and water around 10 minutes prior to shaving to get dirt and oils off.

    2. Follow instructions.

    Just like traditional barber shop shaves with a straight or dual edge razor, there’s a right and a wrong way to use an electric shaver. One big mistake men often make is to only use one hand to shave their entire face. The free hand that’s not gripping and moving the shaver should be used to pull your skin taught in the areas you’re shaving as you move from one spot to the next.

    The next biggest concern is how the shaver is moved about the face. There are two kinds of electric shavers, and both require that you follow the included instruction on how best to use them. Rotary shavers are designed to be moved in concentric circles on the face; not up-down or side-to-side. Foil shavers are best used in the opposite fashion, using up-down motions to shave the hairs (though some are now designed to shave side-to-side too).

    Always read your owner’s manual to see what the manufacturer says is the best way to use their specific shaver.

    3. Tackle sensitive areas first.

    Men tend to forget that they’re using a motorized machine, with steel blades coming within a millimeter of the steel heads that run along the surface of their skin. Add to that the fact that the motor and blades have to further deal with the friction generated by cutting all those thousands of hairs – with different thicknesses and densities – and you have all the ingredients needed for some serious heat!

    Now, most shavers won’t heat up so much during an average shave that they’ll actually scald your skin. But what’s important to remember is that sensitive areas, especially the neck, can be irritated even by the mild heat created after first passing over tough-to-shave areas like the chin, jawline, and upper lip.

    Many men shave from the top of their facial hair growth and finish on the bottom (ie., neck). If your neck or cheek areas tend to get razor burn, bumps, rashes, or other signs of irritation, do those areas first before the head of your shaver heats up. If your entire face is sensitive to the heat of the shaver, consider letting it cool off halfway through the shave, or consider buying a wet/dry to eliminate this problem once and for all.

    4. The routine doesn’t end when the razor shuts off.

    You’re not there just yet. Once you’ve finished actually shaving your face, the worst thing you can do is to call it quits and walk away. Shaving of any kind is highly irritating to the skin, and if you don’t have a post-shave routine, your face will always feel the burn – often for days afterward! If you shave every day, this can make the aftermath of shaving quite unpleasant to deal with.

    There are a number of different aftershave lotions on the market that can make your face feel ten times better than the cheap astringents you’ll find at your local drug store like Old Spice, Gillette, Brut and the like. Stick to lotions or balms and don’t go cheap! A bottle of all natural Leather and Wood, Proraso, or Bay Rum will last you a long time and add moisture back into the skin rather than stripping even more away after shaving.

    Then there’s the matter of cleaning up your shaver properly, so it doesn’t get gummed up with skin, hair, and irritants that will make your next shave a real bummer.

    5. Clean and care for your shaver.

    If you went all out when you bought your shaver and got one with an automatic cleaning stand, servicing your shaver is as easy as setting it up in the cleaning/charging stand and letting the equipment do its thing. If you cheaped out and bought one without, or are still using a monstrosity from the 90s, you’ll also need to include some basic maintenance time into your post-shave routine to keep your shaver clean.

    If not, you’ll need to pop the heads off the shaver, according to manufacturer instructions, and use the cleaning brush that came with it to brush the hair and skin out of the shaver. Then rinse under warm running water (using the clean setting on your shaver, if applicable) for 30 seconds. If you’re serious about keeping the heads of the shaver sharp, clean, and well lubricated, apply some shave cleaner lubricant every shave or two as well.

    6. Replace heads at recommended intervals.

    Electric shaver manufacturers set their head replacement intervals according to countless hours of real world testing of their products. If they say to replace the heads every 12 months with regular use, make sure you do so. If you only use the shaver a few times per week, or once in a while, you can extend your replacement intervals by perhaps double what’s recommended.

    However, if you start to feel like the blades are doing more pulling than they are cutting, don’t be so cheap about saving on new heads that you suffer every time you shave! Amazon always has great deals on replacement heads and you can almost always find a link to buy direct from the manufacturer.

    One final bit of advice…

    If your shaver still pulls your hair out even with new heads installed, it’s time to find a new shaver! There’s too many to count out there these days and, if you spend a few bucks, you’ll never regret the decision to upgrade.

    Most people neglect the cleaning their electric shavers since they assume they are built to last. This is usually not the case but you’ve to conscious about how to clean electric shaver. To get the most out of your shaver you need constantly give it a thorough cleaning.

    The first and basic cleaning method is by just shaking off the hairs after every shave. The accumulation of hairs in the head and between the foil can reduce the lifespan and effectiveness of your electric shaver.

    You can remove the shaving head and gently tap the shaver to shake off the loose hairs from the foil. For the shaving head you can use a brush to remove the hairs. The brush should be thin and small so that it can get in between the spikes.

    How to apply oil to an electric shaver

    How to Clean an Electric Shaver with Alcohol

    Electric shavers usually have a screen with holes that allow hair follicles to reach the cutting head. With time, this screen accumulates small strands of hair and some skin cells.

    These materials act as food for bacteria that could cause infection. Alcohol helps to sanitize the blades and the screen to kill any micro-organisms that reside in the electrical shaver. Here is how to go about it.

    1. First you remove the foil and take care of all the loose debris.
    2. Now you hold the shaver over the sink and pour alcohol over it letting it drain into the sink.
    3. For the foils pour alcohol over them and using your hand or a soft cloth, gently rub it to avoid damage.
    4. Lastly, the shaving head. You just run alcohol through it and use the cleaning brush to get to all the tight spaces.
    5. Once you are done, rinse out the parts with water and let them air dry.

    How To Clean an Electric Shaver with Vinegar

    Vinegar also helps disinfect your entire shaver. It is readily available in our homes and highly efficient.

    1. To get started, you mix water and white vinegar in equal parts. The mixture should be deep enough to allow your entire electric shaver to be soaked in it (As long as your shaver is water proof).
    2. You can now separate the parts and dip them in the mixture.
    3. Let them soak for about ten minutes and then start rubbing the parts gently with a brush for the spikes and a cloth for the foil.
    4. Once done, you can soak the entire shaver in hot water to rinse it.
    5. Now that you are done you may wipe the shaver and leave it in the sun to dry.

    This technique should be done at least monthly since it allows you to clean the entire shaver without damaging the moving parts preventing buildup of mold and rust inside the shaver.

    How To Clean Norelco 9000 Shaver

    The Philips Norelco shaver is a rotary type shaver with three rotating blades. Philips has done their best to ensure cleaning it is as easy as can be. These are the steps to follow when cleaning your Norelco 9000 electric shaver or check 7100 review.

    1. To open up the head you press a button on the side which exposes the three rotating blades. We need to take all these blades apart before cleaning.
    2. The blades are held in place by an easily removable plastic part. Just unscrew with your fingers and remove it.

    How to apply oil to an electric shaver

    3. The three foils are then easily popped out. Each foil has a blade inside it which is separated from the foil before cleaning.

    4. Once you have all your parts you start scrubbing each with the complementary cleaning brush that comes with the Norelco shaver. You can dip it in water since it isn’t affected.

    5. Rub all the blades vigorously with the brush until they are completely clean. You can use soap and then rinse the parts in clear water.

    6. For the foil, be less aggressive so as to avoid damaging it.

    7. You can now add lubricant to the blades and the metal guards. This also makes your shaver last longer.

    8. Once you are done with the blades and foils, clean the part that holds them together and the shaver itself with the brush.

    How To Clean Your Remington Electric Shaver

    For the rotary type Remington electric shaver, the procedure is more or less the same as the Norelco shaver. The only difference is that you should not dip the entire shaver in water. For more details you can check full reviews of Remington PG6025 or Remington PG6250 In the case of linear shavers;

    1. You first remove the foil carrier according to the product description. In most cases you just gently pull the carrier off.
    2. Clean the foil carrier with a brush and rinse it in water.
    3. Now go back to the shaver and remove the cutters by gently pulling them out.
    4. Clean them with the brush and rinse in water.
    5. Take what is remaining of the electric shaver and remove hair and debris by rubbing with the brush.
    6. Next you rinse the head with water but do not submerge the entire shaver in water.
    7. Let the shaver air dry and that’s it. You have your clean Remington electric shaver.
    8. Once dry you can decide to add lubricant to the blades and inside the foil. Let it run a little to distribute the lubricant and then you’re done.

    Final Thought about How to Clean Electric Shaver

    Cleaning and maintenance is very crucial for any products and there is no questions about it when it is a shaver. In addition, it is more applicable for electric shaver and the importance is how to do it.

    How to apply oil to an electric shaverDo not ignore the importance of cleaning and lubricating your electric shaver. Cleaning and Lubricating is a vital process to keep your shaver like new and hygienic at the same time. For best results clean your shaver after every shave. If you are unable to do it religiously, it is recommended to clean thoroughly at least after every 3 shaves before any harm is done to your shaver. Once damage is done, taking up the proper habits will not improve the situation, so start from day 1.

    Lubrication

    Many under estimate the importance of lubrication. I would like to term ‘Lubricating a shaver’ synonymous with the function of engine oil in automobile, to reduce engine wear by reducing the friction between metals. A drop of shaver oil or spray is recommended before shaving or after the cleaning and drying process is done to sustain performance. However, applying too much, may cause clogging of the system. So use it sparingly at the recommended amount. The internal parts of the Shaver do not require additional lubrication.

    Your Electric shaver heats up due to friction on the metals engaging in the cutting process. Application of a recommended shaver’s oil is an important agent to fight friction by adding a slippery coating. The oil will minimize the stresses placed on the metal. Apart from lubricating and cooling the shaver’s head it also acts as anti corrosive and keeps the shaver fresh and clean. If you leave your shaver without lubrication for ‘long periods’ it will wear away more quickly than expected, and in due course shaving performance will drop. Do not underrate the importance of lubrication.

    Cleaning and handling

    Many electric shavers come with an automatic cleaning system that cleans, lubricates and charges at the same time. This will make your job easier and save you some time. Some users complain that these cleaning systems mean spending money on replacement Cartridges, but if you want to avoid that you can even make your own Braun Shaver Cleaner for just a few cents.

    Most shavers in the entry level and mid level may not come with a self-cleaning system but you can develop your manual cleaning routine by following the cleaning instructions thoroughly (assuming a manual comes with the package). For manual cleaning I mimic the process of the best cleaning systems like the Braun clean and renew system have introduced.

    Make sure that the thin foil and other sensitive parts of the shaver are not damaged by rough handling ,and application of pressure while removing, cleaning or assembling the head. The sensitive parts of the shaver should be gently brushed with the help of the cleaning brush that comes with the cleaning kit or with soft bristles. Avoid contact with the blades as much as possible in order to avoid the risk of damaging the sharp blades. Running water and Liquid soap or an alcohol based solution is effective enough to clean the blades.

    Keep the shaver under running water and tap it gently on your hand, or shake and brush it lightly to remove the debris and clear the stubborn hairs. For best result I use hot water with liquid soap to remove the oil and residue before I use the brushes.

    I use a soft and springy artist painting brush made of animal hairs. A flat artist sable brush or a small synthetic fan brush will do the job very well. A toothbrush is not a good alternative in my experience.

    After the cleaning process is done, dry the parts thoroughly before you assemble the unit for the next use. You can simply dry the cutter and foil by placing them on a dry clean towel or dry with a hair drier. Promptly replace the cutter itself, on the schedule suggested by the manufacturer. Most manufacturers like Braun, Norelco and Panasonic recommend replacing the screen and cutter after every 12 months. Remington recommends 6 months for the screen and 12 months for the cutter.

    By Allen Benedict Castillo | Submitted On September 16, 2010

    Preshave products are very important when you use mens electric shavers. Preshave oils or lotions are widely used to help smoothen the skin and prevent burns when shaving. They are also used to open the pores of the skin and soften the hair for easy facial hair removal. You should know how to properly use preshave so that you can get its full benefits.

    Preshave oil is best to use before shaving with mens electric shavers. It is an effective component in softening the facial hair and in opening of skin pores. Preshave oils and creams that use natural oils such as olive or coconut oil are way better than mineral oils, which tend to cause pore blockage and damage to the skin.

    There are actually oils recommended for use with electric shavers. These make the hair rise so that cutting the hair will be smooth and the electric shavers will easily slide across the surface. There are also preshaving powders used for electric razors. Such powders will protect the skin from irritation and will coat the hair so that it will stand apart from the skin, allowing electric razors to cut the hair easily.

    In using electric razors, first put a drop of oil onto the blade so that it will pass across the blade. This will make shaving with the use of electric razor easier. It would be better do your shave under warm or hot shower because the humidity will make the hair easier to remove. Just make sure that before you shave with your electric razor, your skin should be dry. Talcum powder is good to apply for faster drying of skin after the preshaving procedure.

    In order to remove the excess oil on the skin when using an electric shaver, try using a preshaving lotion with alcohol content. This will remove the excess oil on the skin. But, if you are sensitive to alcohol then better have some preshave without alcohol content.

    When shaving, the direction of the electric razor should be opposite to the direction of hair growth. Using electric shavers may take you more days to getting used to the effects compared to the ordinary razor. The entire procedure in using mens electric shavers is still the same as that using razors, actually. The difference probably is in the substance of the preshave that you use.

    Introduction: How to Sharpen a Norelco Electric Shaver

    Replacement blades are expensive,$30 to $40. Why not save some money and sharpen the old one ?
    Back before safety razors and during world war II, when steel was scarce, people would resharpen their double edge razor blades on a sheet of glass. I figured why not try it on my Norelco shaver that was leaving my face raw, and it worked, Here is how I did it.

    You will need a small brush to clean shaver and heads, also a flat piece of glass ( a mirror or picture frame glass will do).

    Step 1: Remove Shaver Head

    Brush out any hair in the body, do not use water.

    Step 2: Remove Cutters From Head

    Rotate the white wheel to release cutters and remove from housing.

    Step 3: Clean Housing and Cutters

    Use the brush and running tap water to clean the housing and the cutters. Close down the drain in the sink, you don’t want to drop anything down the drain, then slide out only one of the cutters.

    Step 4: Seperate Cutter From Shield Screen

    Again clean the cutter and shield screen with brush and running water, junk gets trapped in the cutters.

    Step 5: Sharpen Blades on Glass

    Place the blade cutter on the glass. Here is the gross part. spit on the glass, put your finger on the top of the cutter with light pressure slide it into the spit and start moving it in a figure eight.
    Continue the figure eight motion 50 to 100 times and towards the end be more gentle with the pressure. Always keep the glass wet. I tried water but the spit works best, it has a lubricating quality.

    Step 6: Replace Cutter

    Dry with tissue and replace cutter in shield screen, then remove the next cutter and sharpen it.
    Do not remove all the cutters at once as I don’t think it is a good idea to mix them up.
    Reassemble everything and enjoy a great and painfree shave.

    Be the First to Share

    Did you make this project? Share it with us!

    Recommendations

    How to apply oil to an electric shaver

    How to apply oil to an electric shaver

    How to apply oil to an electric shaver

    How to apply oil to an electric shaver

    Electronics Contest

    How to apply oil to an electric shaver

    Origami Speed Challenge

    How to apply oil to an electric shaver

    Trash to Treasure Contest

    How to apply oil to an electric shaver

    57 Comments

    How to apply oil to an electric shaver

    Question 2 years ago on Step 5

    Does the blade scratch the glass?

    How to apply oil to an electric shaver

    Answer 2 years ago

    No it won’t scratch the glass, keep it wet and don’t put to much pressure on blades.
    If your worried about damaging a mirror just use a flat piece of glass, like the glass
    on a framed picture.

    How to apply oil to an electric shaver

    Question 4 years ago on Step 5

    Either a rotory shaver as shown. or foil type, both carry out a scissor action, therefore both the rotating cutters and the underside edges of the holes or slots in the foil would need to be sharp. My shaver is a Broun of the oscillating cutter type. I apply very fine pollishing compound to the outside of the foil and rub it into the foil holes. I then run the shaver for about 40 seconds, and keep gently rubbing the compound back into the holes. Then I remove foil and cutter and carefully clean; hay presto it shaves like a new one: on that basis, cannot see why the same method and simplicity would not apply to a rotory type, though I have never owned or tried one. Would be pleased to see the experiences of others.

    Electric razors are an efficient way to get a clean-cut face without risking razor nicks or having to deal with shaving cream. But keeping them clean isn’t quite as straightforward.

    Many newer razors come with “self-cleaning stations” (which boast all-in-one charging, sanitizing, and lubricating), but they often cost more than $100 and take up valuable space on a bathroom counter. Fortunately, it’s easy to keep your razor clean without this fancy piece of bathroom tech. And many of the tools and techniques for an electric razor also apply to trimmers or clippers, too.

    What you need

    A bristle brush: Getting rid of all the small bits of hair that fall in between blades is important for keeping a razor fresh and functioning. Most electric razors and clippers come with a small plastic brush for this, but if you’ve misplaced it, an old toothbrush works fine.

    Soap: If you’re washing a waterproof electric razor, liquid soap and water will clean your shaving block just fine. But if you’re cleaning clippers, trimmers, or a non-waterproof razor, you’ll need to use the spray cleaner we mention below.

    Blade lubricant: In order to keep the blades sharp and working properly—and to avoid overheating and overworking the mechanics of your razor—you’ll need to keep the cutting block lubricated. Most razors come with a small bottle of oil that will serve you well for a long time, since you don’t need more than a drop or two. But if you’ve lost or used up that bottle, there are a lot of replacement options.

    Spray cleaner: You’ll need this to clean any non-waterproof razor. Shaver Saver is a commonly available option. Anthony DeAngelis, master barber and co-owner of Blue&Black Barbershop in Brooklyn, New York, recommends Andis Cool Care Plus.

    By: Jeff Harder | Updated: Feb 16, 2021

    You turn on the hot water in the bathroom sink, grab your razor and prepare to scrape off a few days’ worth of stubble just before a big job interview. But when you press the button on the can of shaving cream, that aerosol hiss is gone. Scrambling for the nearest bottle of liquid you can find, you discover the only option is baby oil.

    So, can you shave with it?

    Baby oil is a generic term for mineral oils with added fragrance. These clear liquid mixtures of hydrocarbons are refined from petroleum and often used as a moisturizer in cosmetic products. Typically, people apply baby oil after showering. Bathing in hot water removes the natural protective oils from the skin, allowing moisture to escape, which contributes to dry skin [source: Newsweek]. Mineral oil creates a layer that absorbs moisture, prevents water loss and eliminates the appearance of wrinkles due to dry skin [source: American Academy of Dermatology]. Mineral oil is also a common ingredient in many aftershave lotions.

    If you’re out of options, baby oil can be used as a replacement for shaving cream. Just apply a few drops over the area you intend to shave, spread it around and get to work. There’s little to no difference in the closeness of a shave you’ll receive, and because it’s translucent you might have an easier time getting your sideburns straight. In addition, baby oil’s moisturizing qualities reduce the incidence of nicks, razor bumps and other skin irritations. Baby oil is also very inexpensive, particularly compared to the costs of boutique shaving creams. Even a few ounces will last a long time, which could be a cost-saver for competitive swimmers, cyclists, bodybuilders and other folks who otherwise need to regularly shave large segments of their bodies.

    There are some drawbacks to shaving with baby oil. First of all, it’s greasy. It takes a rigorous washing to clean baby oil from your hands, and it can clog your razor blade with shorn stubble, so use a disposable razor and prepare to get messy. If you shave in the shower, be careful — baby oil will make the floor slick. The fragrance of baby oil can also be an irritant [source: Palo Alto Medical Foundation]. Some proponents of mineral oil alternatives even claim mineral oil is carcinogenic, though the U.S. Food and Drug Administration has approved the highly refined form found in baby oil. Be sure to check with a dermatologist before using baby oil, and stop using it if your skin becomes inflamed.

    You might not want to make a permanent switch to baby oil, but it’ll work just fine in a pinch.