Categories
Household-Waste-Disposal

How to amplify electric drums

Initially, electronic drums were solely used for quiet drum practice, especially in residential areas.

There are three major ways of amplifying your drums. You can use a drum amp or a PA system to amplify electronic drums. You can also consider using headphones if you are on a tight budget

The current advancement in drumming technology makes electric drums an excellent choice for gigs and performances.

In this regard, the need for an electronic drum set amplifier is inevitable. Read on as we explain in detail how you can amplify your electronic drums

Do Drums Need Amps?

In order to get the best sounds from your electronic drum kit, you need to buy an amplifier made for drums.

  • Playing with a live band to hear your own playing
  • Amplify sound for your audience
  • Prefer not to use a headphone
  • Prefer not to use a speaker due to weak sound quality
  • Prefer to use a mixer with amp to control the volume

Can I Use Any Amp for Electric Drums?

Drums amplifiers are one of the ways a drummer can use to amplify their drum set. All you need to do is to get a huge subwoofer, which is an excellent compact unit.

The price for a drum amp is also quite low. Another benefit is that they are specifically made for drums. As such, they tend to produce better sound.

As much as it is possible, try to buy drum amplifier equipment from the same manufacturer. This way, you can get an optimized one for your set.

However, it is also possible to buy an electronic drum amplifier from another manufacturer. We recommend the Roland PM-100 as the best AMP for electronic drum set

In this case, ensure you check the specification requirements of your sound system. Knowing the specifications will ensure that your electronic drum kit is compatible.

Be sure to check out our list of the 8 Best Amp for Electronic Drums for more great items like this.

How To Connect Your Electronic Drums To An Amp

​Connecting drum amps is quite simple. All you need is a ¼ inch cable that will connect the “direct out” of the drum module to the amplifier input. The “direct out” is on the back of your drum module.

You can do the connection using the L Mono or both L and R if your amplifier supports it.

Ensure that the amplifier you are using is specifically for an electronic drum set. If you use a bass amplifier, you may not get the best output.

Bass amps do not have the high end sound produced by the cymbals on the set.

Why PA System is Required?

Using a PA system as your drum set amplifier is a bit expensive than using a drum amp. However, a PA system is the best choice if you want flexibility.

report this ad Unlike a drum amplifier that is limited to only one extra input, a PA system will offer you several connection options.

How to amplify electric drums

If you are playing or practicing as a band, having a drum amp will highly limit you. However, if you use a PA, each member of the band will be able to hook in.

The other benefit of using it is if you and your band perform in a small-mid-sized venue. A PA system will be able to fill up the place with sound.

Using a P A system also has other benefits than just powering your kit. You can connect it to your phone or even a turntable.

The disadvantage of a PA system is that you won’t get a deep, rich bass like that of a drum amp. If you want the bass, you will have to buy a subwoofer. That will come at an extra cost.

However, it offers you a good quality sound. It also allows you to produce a high volume sound that a drum set amp.

Passive Speakers vs. Active Speakers.

As you buy your PA system, you also need to consider whether you will purchase passive speakers or active speakers.

If you purchase active speakers, all you need is to connect them to a mixer, and you are ready to go. However, a passive speaker will require you to run it through a speaker amplifier and then into your mixer.

When dealing with amplifiers for electronic drums, always pay attention to the watts of the speakers. Your drum set amplifier should be able to handle the watts comfortably.

How To Connect Electronic Kits To a PA System

There are two ways of connecting your electronic drum set to the PA system. The first option is by use of the ¼-inch cable for the L and R outputs. You can use the cable to connect the single output to the mixer’s single input. You can also do some panning and use both the L and R outputs.

The second option is by use of an XLR cable. An XLR cable allows you to use a very long wire without compromising the signal.

However, you will require a direct box (DI box) to convert a guitar cable into an XLR. A direct box comes with ¼ cable input and an XLR output.

If you think about the past, electronic drums only found use during quiet practice of drumming, mostly suited to residential regions. Nevertheless, we have come far from then. In the modern days, drumming technology has progressed enough to make electronic drums quite a perfect choice for performances and concerts. However, this does call for something additional- an amplifier for the set of the electronic drum.

It might sound a little complicated when we mention the amplification of electronic drums. However, it is not that difficult to actually achieve. You can amplify electronic drums in several ways. The most important ones worth mentioning are using a perfect drum amplifier, a PA system or merely, a decent set of headphones for drums.

We are here to elaborate on the aforementioned choices, and to guide you through the main steps to follow in this regard.

YOU CAN ALSO READ: Best Portable Drum Sets

Using a Drum Amplifier

How to amplify electric drums

You need to start off by connecting the set of electronic drums to a drum amplifier using 2 most important things- a drum amplifier (as you must have already guessed) and a minimum of one 0.25 inch cable. Next, you need to follow the steps given below:

  1. Make sure your drum amplifier is switched off.
  2. Take the 0.25 inch instrument cable and connect it between your drum module’s audio output and the audio input of the amplifier for the drum. Make sure you do not confuse this with the headphone output, given the fact that those are already amplifier and must not be connected to a drum amplifier or PA system at any cost.
  3. Usually, your drum set will be coming with two different outputs. One comes in the left while the other in the right. You can simply connect one of the cables from the left. This will allow a single signal from the drum module to be sent to the amplifier.
  4. Next, you have to switch on the amplifier of the drum and turn up the volume.
  5. Finally, you should simply turn up the master volume of your drum set.

As you begin to play your electronic drum, you can start hearing the amplified sound at this point.

Using a PA System

How to amplify electric drums

This is most relevant when you need to amplify your electronic drum for performing in gigs or live concerts. This is because, simply using a drum amplifier might be too little in this regard.

If you have been consulting a mixing engineer, or just discussing with your ensemble, you must have received the advice to put the electronic drum through a sound desk or more commonly, a mixer, in the venue of the performance for this purpose. We are here to guide you through the steps that you can follow to connect to a PA system.

  1. Take a 0.25 inch instrument cable, (yes, same as the one we discussed in the drum amplifier part), and connect it between the audio output of the module of the drum and the audio input of the amplifier of the drums.
  2. In order to have superior quality of the output, you might want to use 2 different such cables if your drum comes with two different output (one in the left, and one to the right) in the back of the module. You should connect both of these instrument cables to the sound desk.
  3. One of these cables is then used to fix this drum module directly with the mixing desk. In some stages or locations, you will have to hook this cable to a Direct Input (DI) box. This box is like an extended version of the mixing desk.

It comes with an audio input which takes the audio line directly to the mixer. If you have a sound engineer, he or she wills advice you to put the audio cables in such a manner that it connects the electronic drum to the DI box.

  1. Next, the sound engineer should be able to channel the audio from the electronic drum module directly to the PA system.
  2. One important point to keep in mind if you end up needing to use a DI box- in order to get a mono or single signal, you should use a standard mono DI box. In this regard, you should generally be connecting the left audio output of the drum set to the DI box.

Nevertheless, if you are trying to generate a stereo signal instead, you can choose to use a stereo DI box, consisting of 2 inputs or 2 separate DI boxes, whereby the engineer must be feeding the input to the two different lines.

Now you are aware about the super simple steps to undertake to connect electronic drums to a PA system.

Using Drum Headphones

How to amplify electric drums

The e-drums are usually equipped with a headphone jack. You are able to connect your own headphones to this pretty simply. If you are trying to use an existing headphone, you may have to get an adapter for 1/8” to ¼” jack conversion. However, this will depend mostly on what kind of drum set you own.

When you are using headphones, be aware to always make use of the headphone output, and not the direct L/R audio output from the module of the drum. This is because the audio from the direct output will sound pretty low.

The headphone jacks usually come as pre-amplified and the module of the drum will usually have a separate volume knob to adjust the volume, as opposed to the master volume of the drum module.

Concluding Remarks

Now you are well aware of the three most important ways of amplifying electronic drums. All 3 are relevant, but suited to different situations, and hence handy to review, and use according to the demand of the situation. You can use such amplification either for big concerts or for smaller practice sessions, as you prefer.

How to amplify electric drums

Many drummers face the annoying problem of not being able to play in their homes. That is because drums are an acoustic instrument which is also one of the loudest. Electronic drums give you the flexibility to play them as quietly or as loudly as you would like. You can monitor the sound with headphones, which means you can practice in the middle of the night without disturbing your family or neighbors.

While electronic drums may not have sounded and felt the same as a real drum or cymbal, modern advancements in electric drumming technology make electric drums an excellent choice for drummers of all levels. Electronic drums are the perfect alternative to an acoustic drum kit and are suitable for beginners and pro drummers alike. While they are perfect for silent practice, amplifying your electronic drums is the way to go if you plan on jamming with other musicians or need to take them to a gig and give a stellar stage performance.

Let’s glance through some of the most common ways to amplify your electronic drums and take them to the next level.

Drum Amps

Drum amps are the most preferred way to amplify electronic drums and give you the best bang for the buck. You can achieve fantastic sound with a subwoofer that is in this nice compact unit. The specialized amplifier is optimized for the wide frequency range of electronic drums. They have several knobs to EQ your sound while also having an option for one extra input for another instrument. Try getting your hands on a higher watt amp as they can deliver much higher volumes and be a viable investment in the long term for your drum set.

We also recommend choosing your amp from your electronic drum kit manufacturer to get an optimized one for your set. If you are buying it from another company, check your drum kit’s specification requirements to prevent compatibility problems. The best amp for electronic drums, in the end, is one with a loud sound and an appropriate frequency range. Not all amps are designed for electronic drums after all, and buying an amp without proper consideration will lead to a bad experience.

PA System / Mixer

It might be more expensive compared to drums amps, a PA (public address) system setup is much more versatile than an amp. While drum amps are just limited to one extra input for another instrument, a PA mixer has plugs for many input connections. This versatility is a huge advantage if you plan to work with bands as each drummer will be able to plug their device into the mixer and jam together, unlike a drum amp which is only limited to you. It also has better connectivity and can be used for other purposes than just powering drums like plugging your phone or a turntable into it. One drawback of a PA system is that it does not deliver that exhilarating bass that drum amps do. You will have to invest in a good quality subwoofer to get the rich and deep bass, and you will be able to achieve much higher and greater quality sound with a PA system that way.

Bass Amp

You may also safely use a bass amp to amplify your electronic drums, provided you control the volume. While it may not be the ideal method to amplify electronic drums, it works fine and can sound quite good. A bass amp can deliver a good tone for electronic drums however, you would want to experiment with your amp settings to find some synergy. Nevertheless, a good bass amp can give a rich and deep tone to your drum set, but there are a couple of things to keep in mind.

It is essential to keep the volume down to a reasonable level when using a bass amp with electronic drums since it is designed to amplify a bass guitar. The threshold for maximum volume is lower with an electronic drum kit as it can produce higher and lower frequency pitches compared to a bass guitar. Also, make sure that the amp does not get strained. If the cone starts to vibrate excessively or you notice distortion in the tone, turn down the base settings on the amp immediately.

Keyboard Amp

Keyboard amps can be another fantastic choice to amplify your electronic drums. They have flexible connectivity and tend to be less expensive than drum amps, and some players prefer to use them over a drum amp. Many keyboard amps come with multiple channels and can handle a wide range of frequencies, making them ideal for e-kits.

While drum amps are the optimum choice for electronic drums due to their superior sound quality, others can deliver the goods too. However, it is pertinent to mention that you must stay clear of guitar amps for your electronic drums as they won’t respond adequately to the low range frequencies and result in horrible sound quality.

How to amplify electric drums

Modern technology has gotten to a point where electronic drums can function and operate, with no discernable difference from traditional setups. Electric drums only suited quiet drum practice sessions in no distant past, but you can deliver sounds like a conventional setup nowadays. However, it still requires some add-ons and technical workarounds to achieve the desired output. Below are the two best methods to amplify your electronic drum outputs, their peculiarities, and drawbacks.

1. Drum Amps

You can get an AMP for electronic drum set units to amplify your setup on a broad range of frequencies. Sub-woofer amps are more commonly-used units and often have a quick plug-and-play operation.

  • Cost: The primary advantage drum amps have cost. Amp units are relatively cheaper than alternative options and would often deliver value for money.
  • Flexibility: Drum amps are compact and give extended frequency ranges. Unlike other amps for guitars, drum amplifiers transcend mid-range frequencies, allowing you to change EQ values quickly.
  • Extra Input: One bugbear to drum amplifiers is the limited input support. You can only plug in one additional instrument, which is either not adequate for a full band setup, or means more units and bulk.

Application

Drum amplifiers are pretty much plug-and-play, and you would only need a piece of ¼” instrument cable. Connect the wire to your electronic drum. Then, pay attention not to use the headphone output, as they have amps pre-applied.

Upon connection, your drum module sends mono sound to the amp, and you can increase the volume on the amplifier. Finally, you can tweak the master volume on your electronic drum as you continue playing sessions.

2. PA (Public Address) Systems/Mixer

The PA system is a more elaborate method to amplify electronic drums, with multiple instruments, typically in a band setup. It requires a substantial amount of add-ons, thereby costing more in the long run.

  • Flexibility: Where AMP for electronic drum set boxes would only accept one extra instrument to amplify, a PA system supports several instrument connections. It is suitable for outdoor performances and practice sessions.
  • Output: Comparatively, public address systems deliver fuller, richer sounds than regular amplifiers, which would come in handy if you would be playing in a medium to large-sized room or space.
  • Lack of Bass: Public address systems are not versatile in bass delivery. If your primary concern is bass, you would need to spend extra for a proper sub-woofer.
  • Cost: You will have to spend more on a decent-sized PA system, and when you consider the other peripherals, the setup is relatively expensive.

Application

  • The first method of connecting a PA system to your electronic drums setup is to use a ¼” inch cable on the L/R audio output. You can join the wire into the L alone, in which case you get mono output. Connecting to both L and R outputs gives a panned surround sound. Generally, the panning takes the default position of the individual drums, but you can customize it.
  • The second method requires an XLR (External Line Return) cable and a DI (Direct Input) box. The DI box allows for extension without loss of sound. Connect the box to the drums through the XLR cable, and link the DI box to a mixer afterward. However, you may need to get multiple DI boxes to achieve stereo outputs.

Add-ons

A PA system typically wouldn’t work standalone and requires add-ons to improve the experience. Some of the essential add-ons are active and passive speakers.

  • Active Speakers: Active speaker units typically pair up with mixers for a more resonant, broader sound. It works in a straightforward plug-and-play fashion.
  • Passive Speakers: Passive speakers go into amplifiers first before the connection links into a mixer. Usage is dependent on the wattage of the amplifiers, so it helps to pay attention to how much watts your drum amplifiers can handle.

Wrapping Up

If you plan on taking your electronic drum for practice sessions or small gigs, you have to amplify its sounds. As listed above, AMP for electronic drum set units would deliver sound outputs on the cheap while PA systems proffer more flexibility. Pay attention to the dedicated mixers and cables in order not to distort the performance.

2. Dedicated drum amp – nope. Indeed, most things sold as drum amps are a bit rubbish, and nowhere near as good as a PA.

3. Any monitor – yes as long as it’s got least a 12" woofer. Otherwise you’ll be picking up pieces as soon as you hit your kick pedal

4. [usual ever repeated suggestion] Get a 2nd hand PA. Speakers on stands with tweeters at ear height. Min of 12" woofers. Test with Prodigy’s Firestarter at full pelt. Dunno your real budget or where you are on the planet, so can’t give specifics. In the UK a PA can be picked up for £100 ish.

No Way Jose

Silver Member
  • Dec 2, 2019
  • #4

You might plug your electronic drums into the PA mixer. I’m thinking whoever you are jamming with has a PA system.

Maybe buy a used guitar amplifier at a pawn shop, about 10 watts, cost USA $ 20 to $ 30.

Bo Eder

Platinum Member
  • Dec 2, 2019
  • #5

tony16

New Member
  • Dec 2, 2019
  • #6

No Way Jose

Silver Member
  • Dec 2, 2019
  • #7

Mongrel

Silver Member
  • Dec 2, 2019
  • #8

This would probably work, at least for awhile:

Musician’s Friend Stupid deal of the "hour" Harbinger 15" active speaker $130-

Drums are the most common instruments in a rock band. If you’re looking to play drums, but don’t want to lug around heavy equipment and set it up, then an electric drum kit might be for you.

Electronic drums use MIDI technology instead of physical objects like regular acoustic drums. A MIDI controller lets you produce sounds from any instrument digitally on your computer screen or keyboard keypad so they come out through speakers or headphones rather than coming from a traditional musical instrument.

There are many different types of electric drums with varying features available today depending on what type of music you’re interested in playing and how much money you want to spend.

The following article will explore if guitar amps can be used to amplify electronic drums.

How to amplify electric drums

Can you use a guitar amp for electronic drums?

In short, yes – you can use a guitar amp to amplify electronic drums. However, there are some things you should consider before using a guitar amp. The main difference between a guitar amp and an electronic drum amplifier is the frequency range.

Guitar amps are designed to amplify frequencies in the mid-range to high-frequency range. This is why they often have a bright sound.

Electronic drum amplifiers, on the other hand, are designed to amplify lower frequencies, which is why they typically have a warmer sound.

Most electronic drum sets have a bass module to produce low-end frequencies, but it is still important to find an amplifier that is designed specifically for these lower frequencies.

When looking for an amplifier to use with your electronic drums, be sure to find one that has a frequency range of 30 Hz – 200 Hz. This will ensure that the amp is able to produce the full range of frequencies that your electronic drums are capable of generating.

Guitar amps are not typically designed to handle these lower frequencies, so using one could potentially damage the speaker.

If you’re looking for an amplifier to use with your electronic drums, be sure to do your research to find one that is designed specifically for these instruments. This will help ensure that you get the most out of your electronic drum set and avoid damaging the amplifier.

What To Look For In An Electronic Drum Amplifier

Power

Power is measured in watts. The more watts an amplifier has, the louder it will be. This doesn’t mean that amplifiers with higher watts are better than those with lower watts though. Some do not go above 50 watts, while others can go up to 800 or even 1000 watts.

50 watts in plenty for practicing at home, but you will want 100 watts or more if you are playing live.

Frequency Range

As mentioned earlier, the frequency range of an amplifier is very important when using it with electric drums. It should be able to cover the full range of your electronic drum set, 30 Hz – 200 Hz.

Power Handling

The power handling capabilities of an amplifier are different from the wattage. This determines how much sound pressure level (SPL) it can handle before distorting. An amplifier with a higher power handling can handle more sound without distorting.

Size And Weight

An amplifier’s size and weight can be important factors to consider if you are looking for one to take with you on the go. Some amplifiers are very large and heavy, while others are smaller and more lightweight.

Channels And Equalization

Amplifiers typically have two channels: a left and a right. This allows you to plug in two different instruments at the same time and control the volume of each separately.

Equalization is also important. It lets you adjust the tone of your sound, making it brighter or warmer as needed.

Brand

It’s important to do your research and find an amplifier that is made by a reputable brand. This will ensure that you are getting a quality product that will last.

Price

Price is obviously an important consideration when purchasing any piece of equipment. You don’t want to break the bank, but you also want to make sure you’re getting a good deal.

An amplifier that is properly designed for your electronic drum set will provide you with the most benefits and ensure that both are safe from damage. With so many features, sizes, and brands to choose from, it’s best to do some research before making a purchase.

Conclusion – Can You Use A Guitar Amp For Electronic Drums

An amplifier designed for electronic drums is a must-have piece of equipment to get the most out of your set. When looking for an amplifier, be sure to find one that has a frequency range of 30 Hz – 200 Hz, power handling capabilities, and channels. Doing your research beforehand will help ensure you make the best purchase for your needs and get the most out of your electronic drum set.

And that’s it! I hope you enjoyed reading our article on Can You Use A Guitar Amp For Electronic Drums!

As some of you may know, I was here asking for advice on how to upgrade my son’s kit. He now has a DTXplorer and a Yamaha dual zone snare. He used to have a Simmons SD5K which doesn’t sound so good. He is now very happy! Thank to all of you!

I think we need some sort of amplification. I know there are e-drums amplifiers out there but they are not within budget. Any tips on amplification on a budget?

  • Join Date: 12-2011
  • Posts: 2884

Is it just for others to hear while your son practises?

If you can’t afford a specific drum amp then you are not going to get something that sounds very good in such a low budget to be honest.

I have a Behringer kfx1800 and it’s an ok amp and sounds ok but I’d much rather use my headphones.

  • 1 like

Comment

  • Join Date: 02-2012
  • Posts: 2037
  • 1 like

Comment

  • Join Date: 07-2009
  • Posts: 2489

Comment

  • Join Date: 12-2011
  • Posts: 3850

No, there is nothing cheap when it comes to amplification and e-drums.
There is no other way than using a dedicated speakers or PA. You can’t plug in a cheap guitar or bass little amp, it will sound like crap. Plugging the e-kit into a small stereo system will probably blow up the small speakers.

Repeat it as a mantra: "There is no cheap amplification for drums."

Just use headphones for now, that’s why you got the e-kit anyway, right?

Even going cheap DIY drum speaker and amp, you would still need to spend some money close to what is already available as mass market products, and still not sound very good.

The only way would be to look at places like Craigslist, be on the lookout for PA speakers from something like a DJ or Dance club that went under, and get them for dirt cheap. That will be big, that will be ugly, but it might do the trick.

DTX700, eDRUMin 4+10, A2E Dixon kit, Yamaha cymbals, FSR HH
Kit Pix http://vdrums.com/forum/album.php?albumid=613

My new venture, HiEnd Speakers. : voglosounds.com

  • 2 likes

Comment

  • Join Date: 03-2015
  • Posts: 28

I play guitar. It would be nice to jam once in a while.

Are you in Dundee, Scotland? We used to live there in the early 70’s!

Plan is, seek advice for the cheapest option and then save for it!

That is a great idea! I wanted to have a PA for vocals! My wife sings and it would be perfect when we jam together!

Thank you everyone for your advice!

Comment

  • Join Date: 12-2011
  • Posts: 2884

Yeh, Dundee in Scotland!

I agree with the others. A used PA might be your best bet however probably still not as cheap as you would like but still worth it. Then you might a mixer but small mixers with enough inputs for your vocals, drums and guitar can be very cheap.

Comment

  • Join Date: 12-2011
  • Posts: 3499

"It makes sense if you dont think about it"

Mimic Pro, SPD-SX, 2-QSC K-10s, K-sub, Yamaha mixer, and a bunch of other expensive cool things!

  • 1 like

Comment

  • Join Date: 07-2009
  • Posts: 2489

"Plan is, seek advice for the cheapest option and then save for it!"

That’s like saving for the cheapest car.

You *could* use a $5 computer speaker. It would *work* but be very very very very very quiet and sound horrible.
You *could* use a $100 home HiFi. It would *work*, be slightly louder and sound horrible as you watch the speaker cones fire across the room when you hit the kick pedal, like Marty in Back to the Future.

Cheapest "proper practice" drums amps are probably the Roland PM10 or Yamaha MS50, or as others have said you could cobble a PA together with an amp and one or two speakers.

Still need to know what you are happy to spend, otherwise it’s *really* difficult to make any rational suggestions. $100? $200 $400 $800.

  • 1 like

Comment

  • Join Date: 03-2015
  • Posts: 28

Thank you for the advice on the Roland PM10 or Yamaha MS50. I will look around for those too. I am often lucky at pawnshops.

Comment

  • Join Date: 05-2009
  • Posts: 5423
  • 1 like

Comment

  • Join Date: 05-2009
  • Posts: 5423

If it’s ONLY for practice, there are several mfgs of powered speakers out there that have variations of inputs and adjustments that would work for plugging a guitar and e drums into. 15 inchers would probably be ideal but you *might* get by with a 12 inch. For example, I bought a Behringer 12 inch powered monitor for $250 NEW. It wouldn’t thump your kick except if you’re sitting next to it, but it does have over 200 watts of power. If you are NEVER going to gig or NEVER going to actually use said speaker to actually perform, as in, use as a complete PA, then a single powered speaker of some type will work best, as far as bang for your buck and CHEAPEST option IMHO.

If you think you will at some point use this thing as a proper PA then you will need to spend a little more cash and get a little better option. Wish there was better news but the only way you’re gonna score a decent powered speaker for $100 is used, prolly eBay or Craiglist or a local used dealer, or your local newspaper with a deal with someone offloading some speakers on the cheap.

How to amplify electric drums

To use a drum amp, simply connect the audio output from the drum module to the amplifier using a 1/4″ audio cable.

This article includes a step-by-step guide for each method. If you have any questions then be sure to ask a question in the comment section!

How to Use a Drum Amplifier

How to amplify electric drums

Here is how to connect your electronic drum set to a drum amplifier

What you will need: A drum amp and at least one 1/4″ instrument cable.

  • Turn the drum amp off.
  • Connect a 1/4″ cable from the audio output of your drum module to the audio input of the drum amp (not the headphone output, these come pre-amplified, and should not be used with a drum amp or PA system).
  • If you have if there are two outputs on your drum module (Left and Right) then you can simply collect connect one instrument cable from the LEFT which will send a mono signal from your drum module to the amplifier.
  • Turn on the drum amp and increase the volume.
  • Increase the master volume on your drum module (this may be different from the headphone volume knob)

Start playing your e-drums. You should now hear them play.

How to Amplify Electronic Drums Using a PA system

How to amplify electric drums

If you’re playing live performances, then using a drum amp might be too quiet. The sound engineer or your band might want to put your electronic drums through a mixer or through the sound desk in the venue.

  • Connect a 1/4″ cable from the audio output of your drum module to the audio input of the drum amp
  • For better sound quality, if your drum module has a left and a right output in the back, then you may want to use two instrument cables and connect both of those to the sound desk.
  • Either use an instrument cable to hook the drum module directly to the mixing desk, in many venues a DI Box will be used (a direct input box).
    • What is a DI Box? It’s like an extension box for the mixing desk. It’s an audio input box that will feed the line directly into the mixer. The sound engineer will ask you to connect the audio cable(s) from your e-drum set into the DI box.

    Therefore it’s very easy to connect e-drums to a PA system.

    Drum Amp AND Headphones at the Same Time

    You can connect most electronic drum sets to a drum amp (or PA) AND headphones at the same time.

    This can be useful when playing gigs. It might be useful for the drummer to be able to listen to their beats more closely. You could also even route this signal to an in-ear monitor setup (which is more advanced).

    Using Headphones with Electronic Drum Sets

    How to amplify electric drums

    You do not need to use an amplifier if you simply just want to practice at home yourself.

    Most electronic drum sets have headphone jack headphone sockets.

    You can hook in your own set of headphones very easily. If you’re trying to use a set of headphones that you currently own, then you need to get a 1/8″ to 1/4″ jack connector, depending on the type of drum module that is on your electronic drum kit.

    If using headphones then always use the headphone output instead of the direct L/R audio output from the drum module (as the volume of the direct output will likely be too low). These headphone jacks are already pre-amplified and the drum module will often have a separate headphone volume knob compared to the master volume.

    If you do not hear anything from the drum module, then make sure that the headphone knob is increased enough.

    If you want to record electronic drums on your computer, then make sure to check out our guide on this topic.

    Connect to a speaker

    How to amplify electric drums

    A speaker can also get the job done in amplifying your electronic drum set. The sound quality of regular speakers like this can vary wildly, and it’s better to use a proper PA system when playing gigs.

    You need to use a speaker that has the correct audio connections, or alternatively you can get an adapter or use an audio mixer.

    Summary

    Amplifying your electronic drum set can be done in several ways and you’ll often need to make use of the right equipment.

    Overall, the best way to amplify your electronic drum set would be to have it connected directly to a PA system or mixer. This is also something that requires little effort and will sound amazing with almost no hassle involved at all.

    Using headphones can also get the job done and it’s a very easy task for anyone to achieve, you could even connect them directly into the headphone jack of your drum module.

    Using an amplifier can get the job done but you will likely need to mess around with settings and it probably won’t be as good quality compared to the other two options available. You should also use an amplifier that is designed for use with electronic drum sets.

    Using your speaker can also get the job done but it should not be used unless there are no other options available (you may need to make changes to the output volume of your speaker if you do).

    Searching for the perfect booty shorts items? Shop at Etsy to find unique and handmade booty shorts related items directly from our sellers.

    How to amplify electric drums

    Booty shorts started as a more modern style of slim fitting women’sunderwear known as boy shorts or hipster panties with a cutthat lies.

    Booty shorts are a very common item among all types of dancers, cheerleaders, athletes and anyone that is active. They can be worn everyday (weather

    How to amplify electric drums

    Boy shorts or boyshorts, also known as boy short panties, boys’ cut, booty shorts, shorties, or boyleg briefs are a kind of women’s underwear that goes all the way

    How to amplify electric drums

    What are booty shorts? Find answers now! No. 1 Questions Answers Place. More questions about Music, Music Genres, Pop Music, Miley Cyrus, what

    How to amplify electric drums

    Online shopping from a great selection at Clothing, Shoes Jewelry Store. Amazon Try Prime 1-48 of 23,134 results for Clothing, Shoes Jewelry: booty shorts

    How to amplify electric drums

    These booty shorts are the shortest dance shorts we offer, perfect for keeping cool during practice or performance, adding coverage over leotards or pairing with

    Amazon.com: booty shorts. Very comfortable and durable booty short. Daxin Womens Winter Velvet Soft Stretchy Shorts Clubwear High Waist Drawstring Hot Pants.

    Find booty shorts at ShopStyle. Shop the latest collection of booty shorts from the most popular stores – all in one place.

    How to amplify electric drums

    Shop our dance shorts in a variety of styles and colors. From booty shorts to high waisted dance shorts, you will find a style to fit your every dance need.

    The thing is that the term booty shorts means two different things. One is a kind of underwear that shows your cheeks. The other meaning is shorts that are …

    How to amplify electric drums

    In defense of booty shorts. by

    jenniferlynn on February 20, 2015. in Body Image, CrossFit It is no secret that Crossfit girls have a tendency to lean towards wearing

    How to amplify electric drums

    Find great deals on eBay for booty shorts and yoga shorts. Shop with confidence.

    How to amplify electric drums

    ICE DANCE – Ice Skating Apparel and Dance Wear. Please use to obtain correct sizing for Booty Shorts Price: FREE. R14 Booty Shorts Price: 15.00. R30

    How to amplify electric drums

    To hear your electronic drums you will need either an amp or a pair of headphones. Most drummers use headphones, but you can also buy amplifiers specifically designed for electronic drums. You can buy an amp for personal use (known as a monitor) or a larger amp for performing live to an audience.

    If you’re looking for an affordable way to listen to yourself playing – headphones are normally the correct choice over amplifiers.

    You can often get headphones included as part of a bundle when you buy your electronic drum set.

    I actually wrote an article that explains everything you’ll need for some of the most popular electronic drum sets, find out more in our best electronic drum set round up.

    Do I need a special amp for electronic drums?

    It’s generally not a good idea to use guitar amps or amps designed for other instruments when playing electronic drums.

    This can often wear out the amp very quickly and most instrument amps will produce a very low-quality drum sound.

    If you do decide you want to hear your drums out loud without wearing headphones – you’ll need to get yourself a drum amp.

    For personal use in the home, a small amp or a personal drum monitor is normally the best option.

    This will allow you to practice out loud by yourself and perform for family and friends.

    Many drum manufacturers make drum amps or monitors which pair extremely well with their electronic drum sets.

    For example, for my Roland TD-1DMK drum set, I use a Roland PM-03 Drum Monitor which produces a very high-quality drum sound at a low volume, ideal for practice.

    How to amplify electric drums

    Not all amps are made the same and cheaper amps do tend to have the inferior sound quality to the amplifiers made by the more expensive and established brands.

    Do electronic drums need an amp when performing live to an audience?

    If you’re looking to perform live to an audience, you will need a bigger drum amp for your electronic drums.

    How to amplify electric drums

    The same applies if you’re practicing with an amplified band, as your drums will have to compete with other instrument amps that can often get pretty loud.

    Occasionally in a small venue, there will be a PA system that you can plug your drum set directly into but most of the time, you’ll have to bring your own drum amp.

    In conclusion

    Whether your drum set requires a set of headphones, a small amp or a large amp depends on which musical situations you’re likely to find yourself in and how loud you need to go.

    If you’re not sure where to start, just go for a pair of headphones – they’ll remain useful whether or not you decide to buy an amp in the future.

    How to amplify electric drums

    So you have an electronic drum kit, or you’re about to purchase one. How do you actually hear the drum sounds? Are headphones enough? Do you need an amp for electronic drums?

    With acoustic drums, you sit down and play, and it’s loud. But with rubber cymbals and mesh heads, electronic drums are quiet. It’s the sound module on an electronic drum kit that enables the drums to produce sounds. But to enjoy those sounds, you need a set of headphones or a drum amplifier.

    Without an amp, you’ll always have to wear headphones to hear your playing. Plugging your drums into a drum amp allows others to hear your playing.

    Can’t you just plug your drums into that spare guitar amp that’s been sitting around collecting dust? Sure, you could do that, but it won’t sound great. To get the best sounds from your electronic drum kit, you need to buy an amplifier made for drums.

    Electronic drummers who play with a live band should have a drum amp, either to use as a monitor to hear their own playing, or a main amplifier for the audience to hear the drums. A more powerful amp produces the best sound for an audience, especially in a larger venue.

    Let’s look at a few more considerations in amplifying your electronic drums.

    Drum Amps vs. PA Systems

    You can use a drum amp or a PA system to amplify your drums. But what’s the difference, and what should you consider before choosing one over the other?

    Drum amps are designed to handle the wide range of sounds produced by electronic drums. Thumping low bass, high crashing cymbals and everything in between can sound great through a drum amp. These amps are usually not aimed at vocalists or guitarists.

    Many live drummers use drum amps as monitors, even if their band is playing through a PA system or other venue amplification. This is so they can hear their own playing and stay in sync with the band. Drums amps give drummers their own separate source of amplification.

    On the other hand, PA systems are geared more toward vocalists, entire bands, and DJs. PA systems can reproduce all the frequencies of drums, so you can definitely use a PA system with your electronic drums. The difference between drum amps and PA systems is not so much in the sound quality, but in how each is designed to be used.

    How do you plan to use it?

    Drum amps and PA systems each have EQ functions and multiple inputs. A key difference is that drum amps usually have an output to send drum sounds to an external sound mixer if needed, while a PA has onboard sound mixing capability.

    Unlike a drum amp, a PA system is designed to amplify more than one instrument at a time, like vocals from a microphone, a guitar, and a bass. Because of this, it usually includes an onboard sound mixer to balance sounds from the different instruments. If the PA system has enough inputs, you can plug your drum kit into a PA and balance the sound with rest of the band.

    In choosing a drum amp or a PA system, it all comes down to how you want to use it. Both can be used as stand-alone amps. If you only play your electronic drums at home and want to hear your playing, get a drum amp. Even if you end up playing live at some point, you can use it as a monitor or an amp for the audience.

    If you need the flexibility of multiple instrument inputs, a PA system is a fine alternative to use with electronic drums.

    How to amplify electric drums

    Loudness

    Unlike acoustic drums, electronic drums can be quiet or loud. If you want to practice without disturbing anyone, plug a set of headphones into the drum kit and practice all you want. People in the next room might hear the sticks hitting the pads, but it won’t be nearly as loud as banging on acoustic drums.

    However, if you want to hear your drums without headphones, or if you need extra volume for playing a gig, you need a drum amplifier. There are plenty of models available, from budget models with enough power for home use, to more powerful amps designed for live playing and recording.

    Conclusion

    Do you need a drum amp for electronic drums? Yes, if you want to hear them without using headphones. Since you probably invested quite a bit of money in your electronic drum kit to begin with, you should want your drums to sound as good as they can. A good drum amp can do this well.

    Look for the right combination of price, wattage, and sound quality for the way you use your drums and you’ll be good to go. If you’re a gigging drummer you may also want to consider balancing the power of the amp with the weight you’re willing to lug around as part of your setup.

    How to amplify electric drums

    Electronic drum sets are more popular than ever before. Both experienced drummers and beginners are turning to these as a way to control volume so it isn’t too loud, and for their ease of use and recording. There are so many advantages to using electronic drums, one being that they can plug into numerous audio devices. You can listen to your e-drums through headphones but a lot of the time we need to amplify them so that others can hear, for that we use the best electronic drum amplifiers, as we’ve reviewed in this article.

    Full drum amplifier reviews and details can be found below, but if you wish to jump straight to our recommended model, you can head here to look at the features and price of the ddrum DA50.

    Why Use a Drum Amp?

    If you have an electronic drum kit, you may already be playing through headphones. Whilst this is fine for short bursts, prolonged playing and loud volumes can lead to complications such as hearing loss and tinnitus.

    Another big benefit of amplifying your drums is that others can hear, and you can hear others! Even if your drums are being run straight into a mixing desk, you may want to set up an amplifier as a drum monitor. Alternatively, you may need an amp to ensure that your bandmates can hear you when you are practicing, or that you can hear other things going on around you! If you have headphones in, you won’t be able to play along with bandmates or a backing track.

    What to Look For in a Drum Amp

    Drum amplifiers do add the option of effects and more, but generally, we want the audio to be pretty clean. In all, the best amp for electric drums will be clean and clear rather than have lots of effects. You may wish to add a touch of compression or EQ but that is probably it.

    In an ideal world, you probably want your amp to have the following features:

    • Power. A little five-watt amp probably isn’t going to cut the mustard here. A 50W or even 100W is far more like what we need to project the sound of your kit. In terms of power, it is better to have and not need, than need and not have. You don’t have to have your drum kit amplifier maxed out the whole time.
    • Clarity and Tone. Arguably the most important thing. A cheap drum amp may not be up to scratch and could make your drumming sound like it is coming from underwater or being played over the phone. The best amplifiers offer a clear, rounded frequency response.
    • Value for Money. Price is always a consideration, drumming isn’t a cheap hobby so if you can get value for money we recommend doing so.
    • Weight. One of the benefits of an electronic drum set is the fact that it is easily portable. Chain it to a heavy amp and suddenly this isn’t the case. Portable, lightweight amps are preferable where possible, especially if you’re wanting to use them as monitors.

    Amps for Electronic Drum Kits

    Time for the reviews. We’ve picked out the top models in terms of quality and affordability along with short reviews below.

    ddrum DDA50 50W Electronic Percussion Amp

    There aren’t a huge amount of amps specifically made for drums, but the ddrum DDA50 is exactly that. This gives it the advantage of having been made with drum frequencies and playing styles in mind, which really shines through in the clarity of the sound.

    The inputs and outputs are impressive, so you can plug multiple things into this as well as have the audio signal running to the desk or other source of your choice. Multiple 1/4″ inputs, XLR line output, an input for MP3 players (great for playing along with your favoirite songs) and even a headphone output.

    A 10-inch driver provides a nifty 50 watts of power, and with a three-band EQ you can even alter the sound to your preference or to suit the space you’re playing in. For more information on using EQ on your electronic drums, check out this video.

    As well as the great EQ and all of this amps other excellent features, this amplifier weighs in at just 15 lbs, making it super portable and great for taking with you to practices and gigs.

    Roland Cube Monitor / PA

    Pretty much every ‘best-of’ list when it comes to amplifiers will include a Roland amp, and this is probably the best Roland drum amplifier we’ve used, especially for practice. In spite of only having 30 watts of power, this amp has a huge amount of clarity.

    This is described by the manufacturers as being ultra-versatile, which I would have to agree with. Three inputs means you can rum multiple instruments and audio sources to the amp, hence it being advertised as a “mini PA system” as well as drum amplifier. Is this the best way to amplify electronic drums? Perhaps not if you want them to be on their own, but if you are at band practice and have vocals and a guitar to plug in too, or want to plug in a metronome or another audio source to play along to, this could be the answer for you.

    Roland has the added benefit of the fact that they make electronic drum sets, so the brand know what they are doing when it comes to amplification for their own instruments!

    Behringer Ultratone KT 108 – The Best Cheap Drum Amp?

    Behringer is a brand which comes in for a lot of criticism in some audio reviews. A lot of engineers don’t like the brand, which specializes in the more affordable end of music equipment. I find their products to be hit and miss, with some offering great value, and some falling short.

    The KT 108 may not be the most amazing amp you’ll ever use, but it is designed with clarity in mind. Often used for keyboards, it doesn’t add much to the sound like a blues amplifier or guitar amp from Orange amps might. It is also pretty powerful and can handle small venues and practice rooms with ease.

    It probably won’t win any awards, but if you’re a beginner or are looking for a cheap option, the Behringer KT108 shouldn’t be ignored.

    Conclusion

    Forced to pick the best, the ddrum probably wins the race for us due to its clever design which definitely accounts for drummers and their needs. Of course, which amp to use for your electronic drums is a subjective choice and depends how loud and high quality you need it to be. There is no point spending thousands on a drum set only for it to be amplified by a cheap, low-quality amplifier.

    If you have any experience with the products above or have another drum amp to recommend, make sure you leave us a comment or get in touch!

    I went and saw Johnny Rabb and the Rock and Roland Band last night. They did a pre-show workshop at the local Guitar Center.

    First, let me say that Johnny Rabb is amazing to watch and he really incorporates a lot of the cool features of V-Drums.

    That being said, when they come into a store, they use the gear the store has. This store did not have the TD-20 nor any drum amps. So he used a TD-12 with two Roland Keyboard Amps. Two KC-550s if I am not mistaken. And it sounded awful. All thud and sizzle and nothing inbetween. You could hear the kick and the cymbals and the rest was mud. Johnny was pretty emabrassed about that.

    • Join Date: 07-2000
    • Posts: 120

    Comment

    • Join Date: 01-2005
    • Posts: 227

    Comment

    • Join Date: 12-2004
    • Posts: 4365

    I also concure. i use a kc 500 and and has good highs, mids, and lows.
    a keyboard amp is alot like a pa. it is a full range amp. folks here are going to shoot me as thay are prolly tired seeing this in some of my post.
    here goes, add a bbe and it rocks. it is so cheap and make a great improvment. sorry guys couldnt help myself and pretty darn loud without distorting. any how the td 12 that johnny rabb was playing may have been tweeked my an amature banging on the floor model kit.

    Comment

    • Join Date: 05-2005
    • Posts: 6927

    any how the td 12 that johnny rabb was playing may have been tweeked my an amature banging on the floor model kit.

    That was exactly the case. All the gear was straight off the floor. In fact, the bass still had the price tag on it. Halfway through the first song, the bass player got sick of the tag whacking his hand and pulled it off.

    After reading all the comments I suspect this all had something to do with how they set things up and not the gear itself.

    Comment

    • Join Date: 08-2005
    • Posts: 69

    I also concure. i use a kc 500 and and has good highs, mids, and lows.
    a keyboard amp is alot like a pa. it is a full range amp. folks here are going to shoot me as thay are prolly tired seeing this in some of my post.
    here goes, add a bbe and it rocks. it is so cheap and make a great improvment. sorry guys couldnt help myself and pretty darn loud without distorting. any how the td 12 that johnny rabb was playing may have been tweeked my an amature banging on the floor model kit.
    Whats a BBE?

    Comment

    • Join Date: 12-2000
    • Posts: 3407

    Whats a BBE?

    It’s the missing link of Vdrums. It’s the cat’s meow. It’s what . sorry.

    It tightens the sound, get’s rid of the mud, brightens, gives clarity. I believe the term they use is sonic maximizer. Unfortunately the street price is $750. I have one I’ll sell for $450. (good for Boingo)

    Or you can get quotes and see if you can do better. (bad for Boingo)

    Many of the members of this site own one.

    Comment

    • Join Date: 12-2002
    • Posts: 1180

    That was exactly the case. All the gear was straight off the floor. In fact, the bass still had the price tag on it. Halfway through the first song, the bass player got sick of the tag whacking his hand and pulled it off.

    After reading all the comments I suspect this all had something to do with how they set things up and not the gear itself.

    You’re seriously thinking, that a pro like Johnny Rabb, employed by Roland, and who knows the V-drums range inside-out and backwards, isn’t going to do a factory reset on a floor-model TD12 before he uses it for a product demo.

    Comment

    • Join Date: 05-2005
    • Posts: 6927

    You’re seriously thinking, that a pro like Johnny Rabb, employed by Roland, and who knows the V-drums range inside-out and backwards, isn’t going to do a factory reset on a floor-model TD12 before he uses it for a product demo.

    Comment

    • Join Date: 12-2004
    • Posts: 4365

    Whats a BBE?
    boingo is right except the price.
    it sonically corrects the frequency adding punch and clearity. you can get a BBE 362 sonic maximizer at guitar center for $99.99
    at a fraction of the cost it takes to buy an expensive pa or amp.
    it works very well with my roland KC 500. and i am very picky about my sound. some poeple may make the mastake of over using the bbe and causing the amp to distort.on the amp i have my bass at 9 oclock the mids at 12 oclock and the highs at 10 oclock. the BBE , low contour set at 3 oclock process (highs) 9 oclock. just experiment.

    Comment

    • Join Date: 11-2005
    • Posts: 8

    I have two SRM-450’s I hope to use? They should be good – right?

    Comment

    • Join Date: 05-2005
    • Posts: 6927

    Comment

    • Join Date: 05-2005
    • Posts: 6927

    Comment

    • Join Date: 03-2004
    • Posts: 2814

    You’re seriously thinking, that a pro like Johnny Rabb, employed by Roland, and who knows the V-drums range inside-out and backwards, isn’t going to do a factory reset on a floor-model TD12 before he uses it for a product demo.

    I agree, which seems to leave the KC 550 as the weak link.

    The one time I used a KC 550 I was disappointed. I thought it sounded tinny. And it is big and heavy. I had my kit pretty nicely tweaked and played a little with the settings on the amp. It was in a guy’s basement where we rehearse regularly. THe only change that day was from my usual set up to his KC 550.

    I don’t think a good PA or keyboard amp should take much tweaking to sound good. It might need some tweaks to sound its best, but not to sound good. I could be wrong, but that is my impression so far.

    How to amplify electric drums

    It’s hard to overstate the importance of time in music. On a macro level, time is about tempo: how fast or slow is a song and are we following it. But on the micro level, we can talk about something called “time feel”: the subtle way musicians interpret time as they subdivide beats.

    Subdividing beats simply means dividing larger beats into smaller beats. Whole notes can be divided into half notes, then quarters, eighths, sixteenths, thirty-secondths and so on. Mathematically speaking, these subdivisions are very simple to place on a grid. But human beings subdivide beats in our heads, we don’t always do it with flawless mathematical exactness. Subtly and often unconsciously, we push and pull certain beats in a pattern that is repeatable, but hard to deconstruct. Continue Reading…

    When it Clicks

    How to amplify electric drums

    My first guitar teacher and I lasted six months before I broke it off. I wasn’t being challenged, and felt I was learning more from guitar magazines than the guy we were paying every week. If you know me, this will make sense–I needed to know I was learning the correct way. I needed assurance that we were starting from the beginning and taking all the right steps. So we did a bit of homework, bought a classical guitar and a footrest, and I started up with one of the best guitar teachers in the region.

    I’ll never forget my first and sixth lessons. My sixth lesson was thirty minutes dedicated to proper nail-filing technique. But my first lesson was my first time using a metronome. We used the metronome ALL THE TIME. It was ticking when I came into the lesson, it was ticking when I left, it ticked in the background while my teacher gave me feedback. The constant ticking was enough to drive you mad, but you know how they say there’s a fine line between madness and genius?

    Speak Your Mind: Talking to Drummers (Part 2)

    Check out part 2 on how to effectively talk to drummers during rehearsal:

    Speak Your Mind: Talking to Drummers (Part 1)

    Check out the video below — the “Do Not’s” when talking to drummers:


    If you can’t see this video, click here

    Playing Together as a Band: Sonic Range – Pt. 2

    How to amplify electric drums

    When playing together in a band context, by now, I think we would all agree that the sonic range I’m playing in (the octave I’m singing or playing my instrument in) is just as important as the rhythms I’m playing, right? Knowing this importance is one thing, but working it out in rehearsal can be very challenging and time consuming.

    If there’s one instrument that runs the highest risk of eating the whole pie (100%) in the sonic plane, it’s the keyboard. The lowest note on the keyboard is an A – two semi-tones lower than the low B on a 5-string bass guitar. If your bassist is playing a 4 string, the piano has a whole 5th below the low E on the bass. No one in the band can possibly play those notes in the low A-E range except the piano player. You might think, “Great! Sonic room for me to play without worrying about anyone else running into me.” Well, let me put it this way, if there’s a bass guitar player in your band, let them live up to their name and actually be the bass player in the band. Keyboardists, let the bassists have their range and take that left hand and bring it up the keyboard. I know, that’s almost two whole octaves chopped off of the low end of the keyboard. There is an exception to almost every rule, but when it comes to the keyboardist’s left hand, I wouldn’t have it playing much lower than the C that is one octave below middle C. When keyboard players get their left hand away from what the bass player is playing, the sound will significantly tidy itself up and the listener will feel more depth to the overall sound.

    There is an exception to almost every rule, but when it comes to the keyboardist’s left hand, I wouldn’t have it playing much lower than the C that is one octave below middle C.

    Softwares like Addictive Drums 2 and EZdrummer 2 are used to recreate and produce the sounds of drums in a software-specific way letting us tune every little detail of the sound. Software like Addictive Drums and EZdrummer has made it easier to create music.Know more in our article of Addictive Drums 2 vs. EZdrummer 2.

    Each of them is renowned for its almost authentic drum sounds and intuitive functionalities. Today, we’ll be comparing both of them to see which one is the best among them.

    Addictive Drums 2 vs. EZdrummer 2: Getting to know them

    Before we dive into the comparison, let’s get to know about the software, the functionalities they offer, and the ease of use of each of them.

    Addictive Drums 2 and EZdrummer are virtual drums that reproduce drum sounds to use on your music, providing complex functionalities to tweak your sound to your liking and other various things.

    Addictive Drums 2

    How to amplify electric drums

    Addictive Drums 2 has a very raw sound to it where you can tweak and compress it through several of their tuning settings. They provide rich quality unprocessed sounds that many musicians love because they tend to tweak by themselves.

    Addictive drum 2 comes with a few drum kits along with some extras to go along with it. There are also some presets that you can choose from. Apart from that, they also have many collections of drum kits that you can purchase and use. They provide different drum kits depending on different genres like rock, pop, vintage, and others. Their options are comprehensive, and you can find your desired set of the drum kit from there easily.

    They also let you demo the drums’ sounds before you buy them for you to know if these are the ones you require.

    EZdrummer 2

    How to amplify electric drums

    EZdrummer 2 provides a pre-processed sound that some users may like because they won’t have to tweak the sounds to get the best out of it. They also feature some customizability of their sounds, but they are limited. People who are just starting out with virtual drums may like them as they don’t have to fiddle around too much and can be more focused on making the music they desire.

    They also come with a few drum kits and a few other extras. And there are other drum kits that you can buy separately too. They also have a collection of preset that you can select from.

    How They Compare

    The basic idea of both of these virtual drums is very similar. But they each have different techniques and ways that differentiate them. The differentiating factors, however, do not make one of them better than the other. Those factors can be entirely subjective of your choice, so you can pick the better version by yourself. So let’s get into their comparison.

    Processed vs. Raw

    While EZdrummer 2 goes for a more beginner-friendly approach with their pre-processed tune of the drum sounds, Addictive drums 2 gives you more freedom of customizability and provides a more raw sounding experience to you.

    Addictive drums 2 provide a rawer, unprocessed sound. They give various features to sculpt those sounds to tune your sounds just the way you want them to be. You get to insert effects like Compression, Eq, tape saturation, and more.

    A separate Bus for parallel compression, and also 2 send results for reverb and delay. You also get complete control of the volume envelope of each drum sound and pitch control for controlling the pitch of each kit piece, whereas EZdrummer 2 samples are pre-processed.

    So you don’t need to mess around with too many options and be confused with it. The trade-off being, you don’t get as many tweaking options as you’ll have with Addictive drums 2. Some eq options are available, but you won’t have as much flexibility as you had with Addictive Drums 2. This may be beneficial for people who are getting into these as a beginner and won’t have as much knowledge about these controls and tuning options as a professional would.

    The Drums

    Addictive comes with 3 complete drum kits with some 2 additional snare drums with a sub-total of 5 snares.

    EZdrummer comes with 2 categories of drum kits. One being Modern, and the other is Vintage. In the current category, you will get 3 complete drum kits with several additional kits for a total of 13 snares and 9 kicks to mix and match according to your preference. In the vintage category, you get 2 complete drum kits with 4 snares and kick options.

    So, there are more kits and extras included in the EZdrummer 3 kit than the Addictive Drums 2, but both of them have a wide variety of drums that you can purchase additionally for your needs.

    Presets

    There are some critical differences in the presets as well. In the basic version of Addictive Drums 2, you get a total of 130 presets, ranging from totally unprocessed sounds to demented ones.

    Whereas EZdrummers comes with 29 presets only, which also consist of fairly natural sounds to more processed sound variations.

    MIDI

    They handle MIDI a little differently, too. With Addictive Drum, you get over 5000 grooves that have a prior version of a specific beat and several other versions of it. But you don’t get any new MIDI patterns with their expansion packs. But they do have MIDI packs available.

    EZdrummer configures their MIDI in song format consisting of intros, chorus, and others with a few variations of each of them. You get a total of about 1000 patterns in it. They also have a MIDI-only expansion pack that you can purchase.

    Conclusion

    The choice you want to get is subjective to you as they have different sets of features that they provide that may or may not be helpful to you.

    Hopefully, this comparison in Addictive Drums 2 vs. EZdrummer 2 guide gave you a little more insight into this software and helped you decide which to get for you.

    This is how they’d sound if you’re playing them without any sound output:

    So…where does the sound come from?

    The drum module that ‘powers’ the electronic drums would come with various output ports which gives you the option to connect to speakers, amps or headphones.

    If you’re new to electronic drums, I answer some of the common questions on the edrum sound output options you have below.

    How do I hear myself on my Electronic Drums?

    All electronic drums produce sounds by triggering drum samples stored in the drum module aka drum brain.

    The drum module comes with various output options – Phones output (for TRS or TS cables, usually 1/4″) and Master output (XLR cables) are most common.

    For example, here’s the Roland TD-50 drum module:

    How to amplify electric drums

    You should find some Phones output on all drum modules. These are low power outputs that you can plug your headphones, a small set of speakers or any sound producing equipment that doesn’t require external power.

    How to amplify electric drums

    The Master Out options can usually accept 1/4″ cables or XLR cables and these usually connects your drum module to external amps or PA systems. If you’re playing on larger speakers, the drum modules are usually not powerful enough for louder volumes on such speakers, hence you’ll need an amplifier to amplify the signals coming from the drum module.

    Depending on your needs, you can choose to listen to your electronic drums using headphones, an amp or a PA system.

    Do I need an Amp for my Electronic Drums?

    If you’re practicing alone and need to be quiet, you do NOT need an amp. Simply plug your headphones into the Phones output port on your drum module and you’re good to go.

    However, if you’re performing at a live gig, you may want to consider a drum amp or even a Public Address (PA) system to project the sound of your drums.

    The manufacturer of your electronic drums would usually product a line of suitable drum amps as well. That’ll be the best place to start.

    For example, Alesis produces the rather powerful Strike Amp that is compatible with its popular Alesis Nitro drum kit:

    How to amplify electric drums

    Such amps tend to come with speakers, so you’ll only need one additional equipment. They are sufficient for band practice or live gigs at smaller venues.

    These amps also tend to be perfect as monitor amps – which could provide a rather satisfying even if you’re practice alone in a garage or studio.

    Do note that there is a vast difference between a guitar amp and a drum amp. Avoid using a guitar amp with your drums because it is not built for the frequencies and power requirements of an electronic drum kit. You’ll usually get poor quality sounds and may even end up damaging the amp.

    Depending on the gig venue, you may need multiple speakers, that’ll lead us onto the next question.

    When should you consider using a PA System?

    PA systems usually come with a couple of additional equipment – mixer, amplifier, speakers.

    Because you’re breaking the sound chain into multiple equipment, PA systems tend to be slightly more expensive.

    That said, because they allow multiple components, you’ll have the flexibility to tweak any of the item in your sound chain. For example, you could have multiple speakers for larger performance venues.

    You’ll also have the option to control and amplify more instruments, all you’ll need to do is to feed their signals into the mixer. You may need a direct box for each instrument.

    Conclusion

    I hope this short article have given you the key information that you’ll need to start drumming on your e-drums. Remember, most electronic drums do not come with speakers. You’ll need to get an external speaker, headphones or amp to listen to it!

    The Simmons DA2112 is a high-powered and versatile drum amplifier that combines high-fidelity sound, stage-ready power, 3 stereo line inputs and Bluetooth® audio input — with flexible monitoring of metronome, click and guide tracks.

    The result is a rig that provides high-impact bass and studio monitor-style sound quality for your drums and tracks with full control of your tone via a 4-knob EQ.

    How to amplify electric drums

    How to amplify electric drums

    The result is a rig that provides high-impact bass and studio monitor-style sound quality for your drums and tracks with full control of your tone via a 4-knob EQ.

    How to amplify electric drums

    The Simmons DA2112 is a high-powered and versatile drum amplifier that combines high-fidelity sound, stage-ready power, 3 stereo line inputs and Bluetooth® audio input — with flexible monitoring of metronome, click and guide tracks.

    The result is a rig that provides high-impact bass and studio monitor-style sound quality for your drums and tracks with full control of your tone via a 4-knob EQ.

    Currently I have a midi controller, and a guitar amplifier and I want to amplify the controller with my amp. Also would amplifying a piano keyboard be the same process? Thanks.

    It seems like maybe you were hoping the midi controller would be a keyboard you could plug into an amp and rock on. It is not.

    There are keyboards that can do that, but they are generally more expensive than your average midi keyboard. that doesn't mean you won't be able to find one you can afford, especially if you can find a good used one.

    Midi controllers only control sound that comes from somewhere else, like a digital piano, a virtual instrument you might play using something a computer program like Logic Pro, or Pro Tools.

    Amps are tricky. A guitar amp is designed to make electric guitars sound like electric guitars. Keyboard amps boost a wider range of frequencies because that's we associate with keyboard sound. Strangely enough, I've had really good luck with running my keyboards through a bass amp. (I dial bass frequencies down as far as I can.) It works with my Fender Rumble. I can't say about any other bass amp.

    I'm going to throw in some advice. You are absolutely free to ignore it, but I wish I'd taken it when I got started. Study up, before you buy anything. I have thrown away so much money thinking this or that piece of gear would solve all my problems. I still have to be careful I don't get into that mindset still, after all these years, and honestly sometimes I fail. YouTube has endless videos about all kinds of gear and I find it is one of the easiest ways for absorb information, but watch out, listening to someone play an instrument on your phone or your laptop is not the same as hearing it when you play it for yourself.

    How to amplify electric drums

    Drums, drums, drums. Love ‘em or hate ‘em, they’re one of the bedrocks of popular music and are arguably even more crucial to the broad subset of sound we call electronic music.

    This is precisely why, when I get a spare moment from designing sample and preset packs and sit down to create some music of my own, drums are the first thing on my mind, more often than not.

    How to amplify electric drums

    Everybody works with drums in a slightly different way, which is part of what makes it exciting to get a peek into another producer’s setup and workflow – maybe you use the latest sampler as a rhythmic one-stop-shop; maybe you work with hardware; or maybe you just whack your individual samples onto different tracks and sequence them like the good old days!

    The point is, there’s often at least something that can be learned from taking a peek at another producer’s setup and workflow, which is very much my hope in sharing today’s tip – how to widen the stereo image of your drum sound, as painlessly and as quickly as possible.

    I’m going to be using Logic Pro to demonstrate my ideas below, though you can of course achieve precisely the same results in any other DAW worth its salt. Let’s dig in!

    How to amplify electric drums

    1. The Setup

    To kick things off, let’s setup a basic beat using the three most common and widely used types of percussive sound; a kick, a snare and hi hat. It’s the basic unit of the acoustic drum kit and this convention has happily carried over to the electronic world:

    The samples all come from the ‘MA Flare Box Kit’, loaded via Logic Pro X’s Sampler, which you can find in our Flare – Found Percussion Samples pack.

    How to amplify electric drums

    I’m using duplicate copies of Sampler to load each of my sounds on different tracks, which allows me to apply different processing per drum. If I want, I can then bus the different tracks to a drum master bus for group processing as described in a number of my other articles for this magazine.

    I like my sequence but the beat is sounding a bit flat and lifeless at the moment. This isn’t hugely surprising given that I’m working with static, mono sounds, which is how the majority of drum samples are presented. Let’s jazz it up with some extra parts:

    How to amplify electric drums

    Rhythmically, thing are starting to heat up and the interplay between my different drum sounds is creating a nice momentum and flow that can become the foundation of a full production eventually; but, keeping our focus on the drums, there’s still a flatness, a kind of fixed quality, there which I’d like to enliven somehow.

    2. The Chorus Method

    This is where some stereo width would really come in handy, helping to thicken up and embolden the overall vibe of my drums – my favourite percussive element to give some panoramic width are hi hats, so let’s begin there.

    The secret ingredient here is, well, not so very secret at all – the humble chorus effect will be our tool of choice in stretching out sounds that are otherwise fixed in space.

    Chorus works by creating at least one copy of the input signal, mixing it with the original and modulating its pitch via an LFO, hence the thick, woozy, warbley sound you can get from such units when parameters are set accordingly.

    With the mix of slightly differently pitched signals comes all sorts of interesting phasing effects, a result of which is the perceived widening of the stereo field.

    Back to our DAW – we have two choices here; we can either apply the chorus directly onto the hi hat track itself, or we could place it on a send bus, which gives us a bit more control in mixing the dry sound with the wet, effected one. Here’s the results from setting up the former, just for ease and speed:

    I have the chorus rate set to a pretty low and slow value of just 0.367Hz, with the intensity and mix controls pushed up to the maximum position.

    How to amplify electric drums

    Suddenly, the sequence feels like it has opened up and occupies the entire width of the stereo field, plus the fact that an LFO is used in the chorus’ algorithm means we get that subtle, shape-shifting quality as the phase changes between the signals in either speaker. Easy!

    Let’s try the same thing on the additional percussion elements:

    I think this is giving us more of an organic feel, as the subtle pitch variations that we’re getting from the chorus means the beat feels like it’s always continually on the move, even if only marginally. Plus, of course we’re benefitting from the extra width the chorus is giving us.

    3. The Layering Tweak

    Another application of this simple idea that I find particularly effective is with regard to the snare – rather than applying chorus directly, I prefer to copy the MIDI notes across to trigger a new sound simultaneously, such as a clap, widened with some chorus.

    How to amplify electric drums

    This gives us the crisp mono punch of the original snare, plus a widened layer underneath – the best of both worlds! Here’s the snare part in isolation at first, then accompanied by some extra elements that have been widened with chorus:

    Now here it is within the beat:

    We’ve definitely enlivened our original rhythm, and all via some simple but careful application of chorus!

    To further illustrate the ideas above, here’s the same rhythm that we’ve been using throughout the tutorial, only this time triggering some LinnDrum samples from our Foundation – Drum Machine Samples pack:

    Now, I’ll add chorus to the hats and clap tracks, to widen out that stereo image:

    Instant width with just a little bit of wooze for good measure! If you wanted to dial back the woozy factor, you could make the LFO rate as slow as possible so that the phase shifting occurs at a very slow pace; I just happen to like that slightly melted vibe!

    Of course it’s also very possible to engage your ‘Mix’ or ‘Wet / Dry’ control in your chorus plugin to make the effect more subtle still – I hope the above has given you some food for thought and potential methodological ammunition for your next sonic experiment.

    Thicken those beats and turn your back against sterile rhythms – until next time, get creative!

    There are two ways you can produce sounds with your electronic drum, either through headphones or an electronic amp. While the former is often widely used, the latter is perfect if you have quality sound. When you opt to use an amp for your electronic drum, it is always essential to select the type of amp carefully. Drummers often tend to opt for guitar amps or amps designed for other instruments when playing their electronic drums, and from all indications, this can be a wrong idea. So, in this article, we do justice to whether or not you can use any amp for your electronic drums.

    How to amplify electric drums

    Guitar Amps

    Guitar amps are one of the most widely used electronic drums. However, it is not built for the sound requirements of an electronic drum. Instead, it is specifically made to attempt to the needs of a stringed instrument. Therefore, guitar amplifiers can conveniently handle mid-range to high-frequency sounds. On the other hand, electronic drums produce a wide range of sounds, from low bass drum sounds to high pitched frequencies. With these differences in sounds produced from both instruments, it is evident that the guitar amps are not built to play with an electronic drum. Plugging your electronic drum into a guitar amplifier can damage the amplifier speakers, especially as you start playing frenzied beats. So, it is often the best option to use an electronic amp for your drums.

    Keyboard amp

    The Keyboard amp is another alternative amp drummers often use for their electronic drums. Originally built to handle high-pitched sounds from the keyboard, they contain a strong loudspeaker that amplifies the sound to decent levels. Keyboard amps can easily support electronic drums because they have the in-built sound requirement to meet an electronic drum’s sound demands. However, the issue lies in the quality of sound that emanates from the Keyboard amp.

    Most of them don’t produce that natural crispy sound for listeners to enjoy the electronic drums well. Since keyboard amps are accustomed to different sounds, they are not prepared for an electronic drum’s specific chime. Therefore, while the keyboard function better for electronic drums, they don’t meet the particular sound requirements.

    Use a specialized Electronic Drum Amp

    The best amp for electronic drums is the appropriate electronic amps. They possess the right tools needed to amplify the sound of an electronic drum ideally. First, electronic amps have the proper power ratings to handle sounds emanating from the drums. Most electronic amps have an in-built tough shell that can handle various sound pitches without taking any damage. Also, size and weight are appropriately measured to produce quality sounds.

    Help with Recording electronic drums in Audacity

    Forum rules
    This forum is for Audacity on Windows.
    Please state which version of Windows you are using,
    and the exact three-section version number of Audacity from “Help menu > About Audacity“.

    Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
    The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.

    Help with Recording electronic drums in Audacity

    Post by km4drums » Tue Apr 21, 2015 1:27 am

    I have had my electronic Alesis DM6 drums for a few months now and want to start messing around with recording. I just downloaded Audacity as a recommendation for my Windows 8 laptop. I have a USB A to B cable and an aux cable.

    Basically what I was wondering is how to plug in my kit to my computer and use Audacity to record what I play. I’m not doing anything wild, basically I just want to play along to a song on my iPod, record what I play, and add in the track to “make a song”. Any help on this subject at all is greatly appreciated!

    Re: Help with Recording electronic drums in Audacity

    Post by Gale Andrews » Tue Apr 21, 2015 9:46 pm

    km4drums wrote: I have had my electronic Alesis DM6 drums for a few months now and want to start messing around with recording. I just downloaded Audacity as a recommendation for my Windows 8 laptop. I have a USB A to B cable and an aux cable.

    Basically what I was wondering is how to plug in my kit to my computer and use Audacity to record what I play. I’m not doing anything wild, basically I just want to play along to a song on my iPod, record what I play, and add in the track to “make a song”. Any help on this subject at all is greatly appreciated!

    The USB cable only carries MIDI – Audacity does not record MIDI.

    So you have to use the audio output of the Drum Kit.

    If you only have a single input on your computer, it will be a mic input (which will probably over-amplify and distort your recording, and be mono), or a compatible mic/line-in input that can sense high level stereo input but may not be of really good quality.

    Use Device Toolbar to select your Audacity input.

    Are you asking how to get the song from iPod to your Windows 8 machine? If you do that, you can import the song into Audacity, and use Transport > Overdub to play the song in Audacity while recording your drums.

    I’m trying to use superior drummer live, but am having some issues with my rig. I was hoping I could get some feedback or find out if other people are experiencing the same issue.

    I’m the drummer in a metal band, and I’m planning on playing small bars (probably around 100 people) Most of these places don’t have a house system, so I bought 4 alto TS115A 15" powered PA speakers to amplify my drums.

    Here’s the problem:
    When I play an .mp3 through these speakers, they are brutally loud! When I run superior drummer. not so much. The speakers indicate it’s clipping. They are both playing from my computer. I have superior drummer running in my DAW. I have a multi-band compressor and limiter running.

    Any suggestions on why it’s clipping at a low volume?

    Bo Eder

    Platinum Member
    • Dec 3, 2012
    • #2

    OCD Adam

    Junior Member
    • Dec 3, 2012
    • #3

    Thanks for the reply!

    For my current set up, the powered speakers have their own inputs and line/mic level controls.

    I used to have a mixer that was 800 watts per channel RMS that pushed 2 JBL JRX125s, and experienced the same issue.

    The drums are coming from my computer. I’m really confused because if I play an mp3 from my computer, it blows me outta the room with no clipping or distortion. The drums are the only thing that clip at lower volumes. I used the same preset for CD recording and had no issue.

    Is there something unique about the superior drummer output that makes it clip at low volumes? Do i need to use some different settings when using superior drummer in a live application versus home recording?

    This is a simple electronic drum circuit. Do you like playing music?

    Currently, electronic drums are popular. And we are the electronic inventors.

    I would like to present an electronic drum circuit. Our happiness is learning to create it. It can be applied to the various sound effects and many others.

    Ready to get started?

    How it works

    First, we will explain the main idea briefly.
    Look:

    How to amplify electric drums

    Here is a step-by-step process.

    • We use a loudspeaker instead of a Microphone. Knock on the front of the speaker. Make the speaker cone to vibrate, causing a small electrical signal.
    • Then, amplify this signal to more higher.
    • Convert to DC voltage.
    • To control the production of frequency circuit.
    • And, Mix this frequencies signal and DC voltage from the beginning.
    • Last, send an output signal to a power amplifier.

    You probably started to see the picture.

    Let’s look at how the circuit works. As shown the circuit below is a complete circuit.

    Sensitivity control

    Here is the first section. Step working:

    • Tap a speaker to make a little electrical signal, by knocking.
    • Via C1 and VR1, to the Preamplifier into pin 3 of IC1.
    • Adjust VR1 to controls level signal, called “sensitivity control”.

    Although, we will knock lightly or forcefully. The circuit can recognize by adjusting this.

    Tapping too heavy makes sound distortion, So, need to reduce the sensitivity down.

    But if we gently tapped, low signal out. We can rotate VR1 to let a signal through well.

    Next, the output signal of IC1 to convert into a DC voltage before.

    By using D1 and C5 to more smooth DC. To control working in the frequency generators section next. Pass Q1 to increase a signal before.

    Effects control

    Some signals will pass IC2 to generate a frequency. And, adjust VR3 to control a fantastical sound from IC2.

    Tone controller

    Also, VR4 control the signal of IC2.

    Then, that frequencies get in pin 9 of IC3. The IC3 is tone generator gives bass and treble. That signal comes out of pin 4 to mix signal from Q1 to Q2 first.

    Then, output at pin E of Q2 via C12 to an input of power amplifier by RCA Jack.

    Delay control

    Adjust VR2 to control time delay, Sound was long or short.

    How to build

    You can assemble this project on the Universal PCB Board easily and fast.
    If you want PCB layout please email me.

    Here is a step to build:

    We put the correct resistor, Always read the resistance value and location. Well, that should make it horizontal or vertical.

    Then, put the diode in its place correctly successfully.

    Put all the IC sockets on the PCB. What should be careful when inserting the pins of the socket. not folded pin and in the correct way.

    And important, check the lead of transistors and All Electrolytic capacitors. We should also check the polarity of it, right before soldering.

    The equipment outside of the PCB, as LED1 is connected to a cord circuit. If you should have two colors, black and red are connected to Pin A and K of LED1.

    Speaker also to the red line in the positive and the black to the negative.

    Then connect the power cable from the 9-volt battery via a switch on / off to the circuit before.

    Later to a variable resistor value, the exact location, and values

    And the cable length should be about 20 cm in each line, The JACK – RCA mono to mono cable shield is about 20 cm long.

    How to amplify electric drums
    Cr: Photo by RockJam

    You may also like these:

    Testing and using

    If you finished the building project. Your friends are waiting for a great dram sound.

    Let’s set and test it:

    Connect this circuit to the amplifier first.

    Turn the variable resistor in the center, and volume down the amplifier.

    Start to tap a speaker of the electronic drum. This project we use the speaker as a microphone. So, do not too heavy.

    Adjust VR1 to control sensitivity in enough position.

    Rotate VR2 to adjust the delay time, long or short time.

    VR3 is used to adjust the sound weird. The middle position sound is normal but when rotated to the left or right, it will Sounding strange to mix with it.

    – VR4 tone adjustment function to adjust the treble and the bass tone and adjusted according to your preference.

    If you adjusted the results to explore the power cord attached to it or not. Or cable might be loose.

    But if the no matter, it shall be as the test is finished and will be deployed as needed.

    For implementation, depending on your objectives, the tapping noise as the suspension noise. Which helps relaxation or some people might like the music. It helps blend the sound of your music.
    Enjoy with the project.

    I recently got my Alesis Nitro Mesh Kit and it’s awesome when I plug in my Audio Technica headphones. However, I have tried different Samsung, Sony and LG soundbars and I can sense a very very tiny delay in the output, while my headphones don’t have any.

    What could be the cause of this? Are there amps that you can recommend so that I don’t have to worry about these delays?

    How to amplify electric drums

    How to amplify electric drums

    1 Answer 1

    Consumer audio products like the “sound bars” you mentioned are made for applications where precise timing is less important. Whether there’s a 2.5 ms or a 25 ms delay between the input and the output isn’t really important for music playback or even TV.

    These products often combine analog and digital audio sources, and the easiest way to add e.g. equalization to the sound is to convert all sources to digital, then do all the processing in the digital domain, and then convert to analog again.

    Conversion and digital processing inevitably adds a time delay, and if the product is not specifically aimed at musicians, minimizing this delay may not have been of prime concern during the design of the product.

    What you need to amplify an instrument is either an amplifier specifically designed for that purpose, whether analog or digital, or a consumer audio product that is completely analog (for which you may have to go second-hand and probably pre-21st century). The people I know who play electronic drumsets all use either a dedicated e-drum amp, or a keyboard amp.

    ModeAudio has released Amplify, a collection of classic drum machine samples that sound extraordinarily gritty. The reason? The source drum machine sounds were processed with guitar amplifiers and distortion pedals.

    Check out the Amplify library review and download a free taster pack that our friends at ModeAudio created exclusively for BPB readers.

    808s & High-Gain Amps

    Amplify is not your ordinary collection of drum machine samples. The sound design team at ModeAudio went crazy with this one, passing a set of five drum machines (505, 808, 909, HR-16, and Volca Beats) through an array of guitar amps and stompboxes.

    We’re already used to saturating 808 bass drums using tubes and tape machines, but a guitar amp? That’s a pretty wild idea.

    But the idea works.

    The thing is, drum machine sample libraries tend to be boring. Most producers already own a hefty amount of samples featuring the 808, 909, and other classics’ legendary sounds. Why download more? However, not many other libraries feature classic drum machine sounds that went through this type of processing.

    Truth be told, Amplify is not a drum sample collection for everyone. If you’re looking for pristine samples of a classic drum machine, feel free to skip this one. If, on the other hand, your sample arsenal lacks a set of hard-hitting and over-the-top-distorted drum hits, Amplify could be the perfect fit.

    While it’s no secret that a kick drum and a snare hit sound more punchy when distorted, I don’t recall playing my drum machine samples through a guitar amp. This is precisely what the sound design team at ModeAudio did with Amplify, delivering a collection of hard-hitting drums that will cut through a mix with ease. The library also features a set of percussion hits, hi-hats, and cymbals and a folder of layered drums that are ready to drag-and-drop into a project.

    A wall of blinking amplifiers sits on the stage before you as the lights dim and an electric pulse ripples through the expectant crowd around you – the pure joy of noisy, amplified sound rings out in our latest release, Amplify – Driven Drum Samples!

    Apart from the distorted drums, Amplify also contains a set of samples that were passed through a tape delay guitar pedal. These hits provide a nice contrast to the more aggressive-sounding guitar amp drums.

    The Numbers

    Amplify contains 381 drum samples in total. This includes 53 bass drums, 37 snares, 48 hi-hats, 21 cymbals, 67 percussion hits, 29 toms, 15 claps, and 45 layered hits. You also get 66 drum sounds that were processed with effects for a more original sound. As a bonus, the library includes 5 MIDI files.

    The sounds are provided in 24-bit WAV format, with twelve drum kit sampler patches. The kits are compatible with Ableton Live, Logic Pro, and Reason. All included content is royalty-free.

    The Conclusion

    I loved the library because the included samples sound musical and polished, despite the generous amount of guitar amp distortion that was applied. Sure, anyone can grab a bunch of drum machines and pass them through all sorts of guitar gear. Somehow, ModeAudio managed to craft a truly useful drum kit due to this unusual processing chain.

    So, are you looking for distorted 808 bass hits and gritty 909 claps? Need a hard-hitting HR-16 snare? Amplify is the drum library for you. Purchase the full version from ModeAudio or download the exclusive free edition here at BPB.

    More info: ModeAudio Amplify (€17.66 regular price, currently on sale for €12.36)

    Free Sample Pack

    ModeAudio has provided an exclusive set of free Amplify samples for BPB readers. Download this bonus freebie below.

    Download: ModeAudio Amplify Freebie (4.95 MB download size, ZIP archive, contains 45 audio samples in 24-bit WAV format)

    More articles:

    ModeAudio Amplify Review

    The included samples sound musical and polished, despite the generous amount of guitar amp distortion that was applied.