Categories
Household-Waste-Disposal

How to adjust your seat belt

Position the belt low on your hips, then pull the loose end of the lap belt away from the buckle to adjust it tighter. Pull until there is no looseness in the belt, but not until it is causing an indent in your body. Seat belts are devices that has been proven to save lives.

When does the passenger seatbelt light come on?

Passenger seatbelt light comes on when no passenger is in… When I’m driving with no one in the passenger seat (kids in the back), the passenger seat belt light flashes on and beeps. I drive a 2013 Subaru Impreza.

What happens if you dont put your seat belt on?

If you don’t fasten the seat belt and start driving, most vehicles will start flashing and chiming at you until the seat belt is secured. Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal.

Why does my seat belt alarm keep dinging even?

Check all wiring from the belt buckle release a the way down to under the seat; both sides…both seats They both seats could be interlinked into system; when one fails (bad connection) the other seat sensor fails also. Do not defeat the system by unplugging it under the seat!

Why does my Seatbelt light not turn off?

Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal.

Why does the seat belt not on warning light not turn off?

Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal. Is it safe to drive with the seat belt not on warning light on?

If you don’t fasten the seat belt and start driving, most vehicles will start flashing and chiming at you until the seat belt is secured. Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal.

Check all wiring from the belt buckle release a the way down to under the seat; both sides…both seats They both seats could be interlinked into system; when one fails (bad connection) the other seat sensor fails also. Do not defeat the system by unplugging it under the seat!

How does the Seatbelt light work in a car?

In your vehicle, the occupant detection sensor detects when someone of the appropriate weight is sitting in the passenger seat. It then sends this information to the occupant detection module.

Take a paper binder clip the black ones with the crome handles get at any office supplies. Pull out a little slack on the seatbelt and clip the binder just under the D ring this works great and it’s like not wearing your belt at all.

Can you adjust seat belt?

Position the belt low on your hips, then pull the loose end of the lap belt away from the buckle to adjust it tighter. Pull until there is no looseness in the belt, but not until it is causing an indent in your body. Seat belts are devices that has been proven to save lives.

How do you get a seat belt extender for a Honda?

Any seat belt extension sent is designed to click into the Honda vehicle specified. Simply select the model and year of your Honda and the seat for which you need an extender. These car seat belt extensions are safety tested to exceed applicable Federal Motor Vehicle Safety Standards (FMVSS).

Where do you Put your seat belt when reclining back?

Your seat belt won’t work as effectively if your seat is reclining back. Look for a lever on the side of your seat. This is usually on the side facing the side door. Pull it up until your seat is as close to a 90-degree angle as possible.

Where can I get a seat belt guide for a Mustang?

The Mustang Seat Belt Guide / Support to replace the clumsy magnetic belt strap on the side of the seat that easily comes undone while driving. So picked a pair up today at a local Mustang parts supplier, designed for the 2015 – 2018 Ponies…

Do you have to adjust your seat belt with a car seat?

If you’re caring for a child, you’ll have to adjust a seat belt with a car seat. Regardless of your situation, taking a few extra minutes to put on a seat belt properly can literally be a life saver! Place your seat in the upright position. Your seat belt won’t work as effectively if your seat is reclining back.

Seat belts are installed in every car for protection. However, it’s effectivity will be based on how it is adjusted for the passenger using it. If a driver or a passenger doesn’t know how to properly adjust their seat belts, then it won’t be as reliable as it can be in cases of accidents.

There are different types of seat belts depending on the model of the vehicle. Old car models and airplanes have the same seat belts that only goes across the passenger’s life. In modern cars, seat belts already have shoulder straps for added protection.

Regardless of the seat belt, you are using, you must know how to put and adjust seat belts properly because it can be your lifesaver. Philkotse.com values your protection, which is why we prepared simple methods on how to use and adjust seat belts.

How to wear a seat belt properly

1. Importance of seat belts

Many people are not taking seat belts seriously. What they don’t know is that it can save their lives. Here are some of the reasons why wearing a seat belt should always be practiced.

  • The driver or passengers who aren’t wearing their seat belts can become projectiles in an occurrence of accidents. Passengers who have unbuckled seat belts can easily be ejected through the rear, side and front windows and may cause death.
  • Rear seat passengers of a car who use both the shoulder and lap safety belts have 44 percent of survival chances in case a crash occurs. This percentage will increase to 73 percent for passengers in the rear seat of SUV or vans.

How to adjust your seat belt

Wearing seat belts is your life-saver

  • A large number of people who die and get injured every day are caused by car accidents. A large percentage of these fatalities and serious injuries are results of not wearing seat belts.
  • Even truck drivers and passengers are not immune. In 2015, half of the reported fatalities were not wearing their safety belts.

2. Common problems with seat belts

  • If your shoulder strap is uncomfortable to wear, like it cuts into your neck, you can buy a padded seatbelt cover that you can usually find in big box stores.
  • If the belt becomes twisted, fold the belt lengthwise for it to flatten for about 30 centimeters or 12 inches below the buckle. Then pull the buckle over the belt’s folded area and turn it to the right way.
  • If the safety belt is tightly pulling you, it might be that a part of it is stuck. Each car’s model and make is differently assembled. So, it’s better to read and refer to the owner’s manual for the specific instructions.
  • There are instances where you can simply pull on the shoulder strap while it’s still unbuckled. It’ll do the trick. If it didn’t work, you can bring your car to the dealership or local mechanic to have it repaired.

3. To adjust seat belts properly

The car seat should be in an upright position

The car seat’s position contributes to the effectivity of the seat belts. It’ll not work effectively if it’s reclining back. That’s why it’s important to that the seat is in an upright position. Look for the lever which is usually on the side of the car seat facing the side door. Pull the lever up until the seat is close to a 90-agree angle.

How to adjust your seat belt

The car seat’s position contributes to the effectivity of the seat belts.

Adjust the seat away from the dashboard

If ever an accident happens, it’s safer if your seat is far from the dashboard. You can move your seat backward or forward using the handle under your seat. It is usually right in the middle part.

Move the handle to adjust your seat. Make sure that you can still see everything on the windows and it should be at least three inches or 7.6 centimeters above the steering wheel.

For people who are vertically challenged, you have to buy a car accessory which is designed for the driver or passenger’s height in the car. Some people use some quick fixes like books and pillows but it is actually dangerous. It can slide and lead you to crash.

How to adjust your seat belt

If ever an accident happens, it’s safer if your seat is far from the dashboard.

Sit properly

Sitting up straight is not only needed to properly wear seat belts, but it also promotes good posture. Sit properly by firmly placing your back and hips against the seat back. There shouldn’t be any space between the seat and your back.

This ensures your seat belt will fit snugly, keeping you in place when an accident occurs. If you’re slouching, you put yourself in more serious injuries such as strangulation.

How to adjust your seat belt

If ever an accident happens, it’s safer if your seat is far from the dashboard

Adjust headrest

The headrest also plays an important role, not only in providing comfort but also for your safety. It keeps your head from snapping back when a crash occurs. Adjust the headrest in the position where it is leveled with the tops of your ears and move it as close to your head as possible.

But that doesn’t mean you have to rest your head on the headrest while you’re driving or even as a passenger.

The shoulder strap should be across the upper chest

These shoulder straps are there for a reason. Make sure to utilize it properly by making sure the strap goes across your upper chest. Do not slip it under your arm or behind your back. For pregnant drivers or passengers, the strap should run between their breast, making sure it is clear of their baby bump.

How to adjust your seat belt

Do not slip the shoulder strap under your arm or behind your back

If you’re driving or riding an older car with seat belts that only goes across the lap, you can skip this step.

The lower strap should be across the hips

The lower strap shouldn’t be laced over the driver or passenger’s stomach. It should be across the hips. Ensure that it fits snugly. For pregnant drivers and passengers, adjust the belt below the baby bump to avoid ant fetal injury.

Another important warning for pregnant women, refrain using other positioning devices such as “Preggy Pillow” and harnesses that only provide shoulder straps. Car tests using the said devices only show more harm for both the mother and the baby.

How to adjust your seat belt

The lower strap should be across the hips

Buckle the seat belts

Slide the seat belt’s metal end into the latching device. When done correctly, you’ll hear a click. You should check that the belt is already secured by simply tugging it. If it doesn’t’ come unlatched, then it is already secured.

How to adjust your seat belt

In the unfortunate event of a collision, seatbelts help protect the occupants from injury. During a collision, the airbag computer initiates the seatbelt igniter to ignite, activating the seatbelts and locking them into position around each occupant wearing the seatbelt. Once a seatbelt has been locked after a collision, it will need to be replaced, repaired and/or reset following the OEM recommendations.

Before the Repair

In a collision, the gas charge ignites, locking the seatbelt in place. Regardless of whether it’s the seatbelt retractor, or the buckle pre-tensioner, once activated, they will not work again.

All seatbelt parts must be inspected before the repair is started. All locked and disabled seatbelts must be replaced to restore this critical component of the vehicle’s safety system to factory condition. The SRS airbag module may also need to be reset or replaced. Repair shops should always follow OEM recommendations. Before beginning repairs, a pre-scan using the asTech™ device should be performed. The asTech™ report provides the in-shop technician with a complete list of the diagnostic trouble codes triggered as a result of the accident.

Once the scan is completed, the technician can determine which parts will need to be replaced, after a visual confirmation has been completed by the in-shop repair technician.

Replacements and Installation

Every seatbelt retractor is equipped with a complex mechanism that is engineered to lock during a collision. The components are accompanied by a small explosive apparatus known as the inflator. The inflator is triggered by the igniter, and must deploy in a timely matter.

The entire process is all controlled by sensors which communicate with the airbag system. In the event of a collision that causes the system to deploy, the sensor, igniter and the inflator will all need to be completely replaced in order to make the seatbelt operational once again. If the airbag warning light is on after a collision, the pre-tensioners, seat belt retractors, or buckles, will also need to be repaired or replaced following the OEM recommendations.

Each seatbelt is equipped with at least one two-pronged sensor that connects to the plug. This sensor will activate the gas charge in the seatbelt which causes it to deploy. A properly working sensor has a resistance between 2-3 Ohms. An improperly working sensor will either have no resistance, or will read something other than between 2-3 Ohms. If the resistance is not between 2-3 Ohms, the sensor or circuit is not working properly, and must be replaced or diagnosed to isolate the source of the concern.

Recalibration

Once all of the parts have been replaced, a completion scan with the asTech™ device will ensure that the seat belt safety system is working properly after the repairs have been completed.

Questions about replacing, repairing and resetting safety systems? Contact one of the experienced Master Technicians at asTech™.

Spring is here at last. Goodbye, sweaters and turtlenecks. Hello, t-shirts! Unfortunately, a familiar pain in the neck comes with the t-shirts. (Literally.) The seat belt always irritates the skin around my neck and shoulder where the t-shirt just doesn’t quite cover. Does that happen to you, too? How about to your kids? I’ve got an easy fix for you with these clever DIY seat belt covers. This hack is sure to save your neck!

This seat belt hack will save your neck! Keep the seat belt from rubbing your bare skin with these clever DIY Seat Belt Covers! <oneCreativeMommy.com alt=Seat Belt Shoulder Pads” width=”600″ height=”1603″ />

Before I created this fix, I’d been known to stuff anything I could find between my skin and the seat belt. I’m sure I looked pretty cool driving down the road with napkins hanging out all over! My kids would just give up all together and throw the seat belt behind their backs. (I hate that, because it’s not safe.) It only took a few minutes and very few supplies to fix the problem.

DIY Seat Belt Covers

This seat belt hack will save your neck! Keep the seat belt from rubbing your bare skin with these clever DIY Seat Belt Covers! <oneCreativeMommy.com alt=Seat Belt Shoulder Pads” width=”600″ height=”220″ />

Ready to get started? You’re just a few easy steps away from a more comfortable driving experience!

Materials:
  • 11 ½” x 6″ piece of soft fabric (I used flannel)
  • Sewing machine and coordinating thread
  • Velcro
  • Straight pins

Step-by-step instructions to create DIY seat belt covers <oneCreativeMommy.com alt=” width=”600″ height=”636″ />

Instructions:
  1. Begin by cutting your fabric to size, and then fold it in half with the right sides together. (See image.)
  2. Sew around the open edges (with about an ⅛ inch seam), leaving an opening to turn the fabric right-side out.
  3. Turn the fabric right-side out and use a pencil or other sharp edge to straighten out the corners. Fold in the open edges around the hole, and pin it closed.
  4. Using as small a seam allowance as you are comfortable, sew along the entire outside edge of the rectangle.

Step-by-step instructions to create DIY seat belt covers <oneCreativeMommy.com alt=” width=”600″ height=”315″ />

  1. Cut a small piece of velcro, and take your fabric and velcro outside to your car. Fold the rectangle around the seat belt and mark the edge of where the fabric overlaps with a straight pin. Use the pin as a guide to help you place your velcro on the fabric. On step number five above, you see the velcro placed on top of the fold. You will actually place the velcro in that same spot, but under the top layer of fabric. Attach one layer of velcro to the underside of the fabric and the other layer of velcro to the fabric next to the pin.
  2. Stitch on the velcro, and you’re done!

This seat belt hack will save your neck! Keep the seat belt from rubbing your bare skin with these clever DIY Seat Belt Covers! <oneCreativeMommy.com alt=Seat Belt Shoulder Pads” width=”600″ height=”896″ />

If you wish, you can remove the seat belt covers when they are not in use. I find it easiest to leave them on the seat belt all Spring and Summer. Since they easily slide up and down the belt, they don’t get in the way of retracting the seat belt. When my hubby drives, he simply slides it down by his waist so that it can’t be seen. The seat belt doesn’t rub his neck. Lucky!

This seat belt hack will save your neck! Keep the seat belt from rubbing your bare skin with these clever DIY Seat Belt Covers! <oneCreativeMommy.com alt=” width=”600″ height=”750″ />

Just be careful when you put the cover away for Winter. I swear that I put mine in the glove box, but I can’t find it anywhere! Good thing these seat belt covers are easy to make. It looks like I need to make some more right away!

Now you and your kids can safely and comfortably ride with your seat belts in the correct position. Honestly, I wish I had thought of this years ago!

Thanks for stopping by today. Be sure to check out more ideas for Spring and Summer by clicking on the images below.

Are you seeking ways to stop the seatbelt from rubbing your neck? If you’re like me, you’re likely on the short side. If the height isn’t adjustable, it ends up going across your Adam’s apple instead of your chest. It’s very uncomfortable!

Before I found a good way to keep the shoulder belt from irritating my neck, I was constantly pulling it out and readjusting it. I even tried to tuck it around my chest. That wasn’t a good idea! Keeping it loose isn’t safe either, and continually having to readjust is very annoying. You can’t pin it or make any other changes that might not be safe.

If you’re height challenged too, consider the following seat belt strap cover. It’s an inexpensive way to solve a very common and irritating problem. The option that I’ve featured is pink, but you’ll also find black if pink shag isn’t your style.

Tips on Finding the Best Seat Belt Pads

The first option that I chose had great ratings, but I didn’t take usage options into consideration. I didn’t pay attention to size either. Just because the description mentions seatbelts don’t mean that it will work.

The first set I purchased was black faux fleece, and it wasn’t nearly wide enough. It didn’t fit. I replaced it with the following microfiber shaggy pink pad. It fits standard widths perfectly. I no longer have to pull out the shoulder strap to readjust it. The pink shag is super soft on my neck.

The seat belt pad is extremely comfortable! I wish I found it before wasting time using fleece. This one fits, and it’s so much better! It’s a great seatbelt solution for short people.

Features and Details

  • Buttery soft microfiber material
  • Fits standard seatbelts
  • Wraps around and secures with Velcro-style hook and loop fasteners
  • Designed for comfort
  • Also great for padding luggage straps
  • Won’t damage clothing
  • Quirky and stylish
  • Matches pink shag steering wheel and seat covers
  • 12.2″ long

Don’t Like Pink?

If you don’t want a pink shag seat belt cover, the link above will also take you to two other options. They’re rated just as highly. One is a black memory foam pad that’s covered with ultra-soft microfiber material. It’s decorated with studded gems in a stylish chevron design.

The other one is also black, and it includes a netted pouch for holding a cell phone, earbuds or anything else desired. They’re great alternatives for those who are tired of having a sore neck from the shoulder strap, and for those who don’t want pink.

Kimberly Dalessandro (a.k.a. Crystal Ray) began her online writing career in 2005 with PageWise Incorporated and went on to become a top writer for both Associated Content and Yahoo Voices under the pen name Crystal Ray. In early 2017 she launched Blue Crystal Sky

Everything Under the Sun. She is continually coming up with new ideas to share with the world.

You May Also Like

How to adjust your seat belt

Get a Giant Red Bow for a Car Gift

How to adjust your seat belt

Cool Memory Foam Travel Pillow for the Car

How to adjust your seat belt

Paw Prints | Car | Keep Cats Off

One thought on “ Ways to Stop the Seatbelt from Rubbing Your Neck ”

That is pretty irritating, and sometime it cut deep

Leave a Reply Cancel reply

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Welcome to Blue Crystal Sky!

Here you’ll find answers to countless questions and interesting info on pets, party planning, gift ideas, entertaining, DIY solutions, and more.

Affiliate Disclosure Statement

As a writer, artist, and website owner, transparency is very important to me. That’s why I want my visitors to know that my site contains ads and affiliate links. That means if you click on an ad or a product link, I may earn a commission at no extra cost to you.

Kimberly Dalessandro, bluecrystalsky.com, is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and any other website that may be affiliated with Amazon Service LLC Associates Program.

What’s it All About?

Blue Crystal Sky covers a wide variety of subjects, and that’s why the tagline is ‘Everything Under the Sun‘.

Seat belts are designed to provide protection against serious injury in the event of a collision. Although there is concrete proof that using them properly can save lives, many passengers and drivers still choose to wear them improperly or not use them at all. Instead, they believe in common misconceptions that wearing them causes discomfort or restrains them from moving freely. Because of this, they run the risk of getting injuries during a car crash.

Using seat belts every time you and your loved ones are in a vehicle is crucial. In fact, this can be the only thing saving you and your passengers during a car accident. To ensure you and your family are wearing this safety component properly, use this article as your guide.

How to Wear a Shoulder Harness Belt

Shoulder harness belts are installed in most vehicles. These must be worn by the driver, the front passenger, and the rear-seat passengers. To wear it properly, follow these three steps:

Step#1: Sit Upright

The proper way to wear them is to sit upright all the way to the back of your seat. Next, place the shoulder strap across your body, grip the seat belt at the metal latch, pull it towards your hip, then connect it to the seat belt buckle. Don’t forget to ensure the seat belt webbing is not twisted for your comfort.

Step#2: Position the Seat Belt Buckle

With your hand, find the seat belt buckle, then make sure its slotted top end is pointed upwards. The release button must also face away from you. Additionally, the seat belt buckle button should be on the outside part of the seat belt buckle for easy access and release. This is especially important in the event of a collision.

Step#3: Insert the Seat Belt

Next, insert the seat belt. Make sure you hear a click; this means the buckle is fully locked onto the seat belt latch. Then, pull on the seat belt at the buckle and adjust the entire belt to your body. To ensure the seat belt fits you well, the belt must cross your body at your collarbone. You can also change the seat and seat belt’s height. Finally, tighten the belt by your hips.

How to Wear a Lap Belt

Unlike a shoulder harness belt, wearing a lap belt is more straightforward. First, your hips must be all the way back in the seat while you remain in an upright position. Next, place the lap belt across your hips, then insert the seat belt in the buckle. Keep in mind that the button on the buckle must point away from you.

Afterward, adjust the lap belt in a way that it fits snugly on your waist. To adjust it tighter, lay the belt low on your hips, then pull the end of the lap belt away from the buckle until the sash is no longer loose.

Conclusion

Seat belts provide safety inside your vehicle by keeping you and everyone else in your seats during impact. For this reason, even though your car already has an airbag system, never stay complacent. Accidents can happen at any time, after all. This is why you have to make sure you and the passengers in your vehicle wear seat belts properly on every ride to avoid injuries in a collision.

Besides wearing seat belts properly, maintaining the excellent condition and functionality of your shoulder harness or lap belts is important. For this reason, seeking seat belt replacement, repair, or maintenance is vital with compromised seat belts.

If you need seat belt repair after your vehicle has been in an accident, reach out to Safety Restore. We rebuild seat belts for all makes and models within 24 hours. Our other post-accident restoration solutions include webbing replacement and airbag module resetting. Contact us to get your vehicle serviced!

How to adjust your seat belt

For people aged 3 through 34, the leading cause of death in the US is car crashes. The number of deaths related to car accidents in the US have declined since the 1960s, largely due to the implementation and use of seat belts and other safety devices. However, more than 32,000 people die per year and approximately half of those deaths could have been prevented with the proper use of a seat belt.

Seat belts were installed in some Ford models as early as 1955 and soon after they become commonplace in vehicles. While there is overwhelming proof that proper use of a seat belt can save lives in a collision, many people choose either to wear their seat belt improperly or to not use it at all. Reasons given for not wearing a seat belt and their counter arguments can be seen in the table below:

Regardless of the circumstance, using your seat belt every time you are in a vehicle, whether as a passenger or as the driver, is a mandatory practice. Proper use will enhance your protection in the unfortunate event of a collision.

Method 1 of 2: Wear a shoulder harness properly

In a vast majority of vehicles, the trend is for manufacturers to install shoulder harness belts in every possible position. The driver, the front passenger, and nearly every rear-seat passenger should have shoulder belts in vehicles manufactured within the past decade. While middle-seat passengers may still have only lap belts, it is overwhelmingly commonplace for shoulder belt to be installed for the driver and passengers.

Step 1: Position yourself properly. Sit with your back against the seat back and your hips all the way back in the seat.

If you are not sitting upright all the way to the back of your seat you can get more slack in the belt than should be present which can cause serious injuries in an accident.

Step 2: Pull the shoulder strap across your body. With your hand closest to the seat belt, reach up by your shoulder and grasp the seat belt at the metal latch.

Pull it across your body towards your hip on the opposite side as the arm you are using.

The seat belt buckle is located at that opposite hip.

  • Tip: Ensure the seat belt webbing is not twisted for the most comfortable wear.

Step 3: Locate the seat belt buckle with your other hand. Grasp the buckle and make sure the slotted top end is pointed upwards with the release button on the side away from you.

  • Tip: In the event of a collision or even just for an easy release when you are exiting the vehicle, it’s important that the seat belt buckle button is on the outside part of the seat belt buckle or it can be difficult to access and release.

Step 4: Insert the seat belt. Line up the seat belt latch on the belt webbing with the slot in the top of the buckle and insert it fully.

You should hear a click when the buckle fully engages and locks onto the seat belt latch.

Step 5: Make sure you are fully secured. Pull on the seat belt at the buckle to make sure it is fully secured.

Step 6: Adjust the shoulder belt to your body. Adjust the seat belt every time you wear your seat belt to make sure it fits you well.

The ideal placement for the shoulder belt is to have it cross your body at your collarbone.

Adjust the seat belt height on the pillar if there is an adjustment in your vehicle.

Alternatively, if you have a seat height adjustment, you can raise or lower the seat height to compensate for the seat belt location on your shoulder.

Step 7: Tighten the belt at the hips. Make sure the lap portion of the belt is low on your hips and snug.

If the lap belt is loose, you can “submarine” under the belt in an accident, causing injury that would not occur if the belt is snug.

Method 2 of 2: Wear a lap belt properly

Whether you have a shoulder belt or just a lap belt, it is critical that it is worn properly to avoid injuries in a collision.

Step 1: Sit upright. Sit upright with your hips all the way back in the seat.

Step 2: Lay the lap belt across your hips. Cross the seat belt across your hips and line the belt up with the buckle.

Step 3: Insert the seat belt in the buckle. Hold the seat belt buckle in one hand, then press the latch on the belt webbing into the buckle.

Make sure the button on the buckle is on the side of the buckle away from you.

Step 4: Adjust the lap belt snugly. Adjust the lap belt so that you it fits snugly on your waist and the slack in the belt is removed.

Position the belt low on your hips, then pull the loose end of the lap belt away from the buckle to adjust it tighter.

Pull until there is no looseness in the belt, but not until it is causing an indent in your body.

Seat belts are devices that has been proven to save lives. For your own safety and the safety of your passengers, you should enforce a rule in your vehicle that every occupant wears their seat belt at all times.

This article originally appeared on YourMechanic.com as How to Wear Your Seat Belt Properly.

Skip the Repair Shop

Our Mechanics Make House Calls

Autoblog is partnering with YourMechanic to bring many of the repair and maintenance services you need right to you.
Get service at your home or office 7 days a week with fair and transparent pricing.

How to adjust your seat belt

Give yourself some slack – with the Seat Belt Adjuster!

This easy-to-use seat belt adjuster allows you to control the tension of your seat belt and can be adjusted to fit any individual. This useful device moves the seat belt off of your neck to end irritation, chafing and discomfort. It can even prevent clothing from wrinkling under the seat belt.

The Seat Belt Tension Adjuster works by attaching to the top of your seat belt by creating slack without compromising safety.

The Seat Belt Tension Adjuster comes in packs of two so you’ll have one for the driver and passenger or an extra for a second vehicle.

INSTALLATION INSTRUCTIONS

View a video on how to install the Seat Belt Tension Adjuster below in the video section of this page.

After buckling your seat belt:

1. Separate the top of the adjuster from the bottom by holding both pieces and sliding them in opposite directions.
2. Position the Seat Belt Tension Adjuster on your seat belt strap where it retracts, with the red lock and flap facing you. Snap the top and bottom back together with the seat belt in between.
3. Slide adjuster towards the seat belt retractor, and pull the strap not more than one inch out, allowing only enough slack for your comfort.
4. Lock into position by sliding the red tab to the right. Unlock by sliding the red tab to the left or to re-adjust.