Categories
Concrete

How to add photoshop filters

Photoshop comes with lots of filters that you can apply in combination to get an almost unlimited number of different looks on the same image. In this video, you'll learn how to preview and apply combinations of filters using the filter gallery. If you're following along open this image from the practice files for this tutorial. We only have one layer in this image. If you're working on a multi-layer image then select the layer to which you want to apply the filter. And then go up to the Filter menu. And if you come down to this area you can apply a single filter from any of these categories. But let's see how we can preview and apply combinations of filters. For that choose Filter Gallery. from this menu. That opens this big filter gallery window. With the last filter that you used applied to the open image. So, your image may look slightly different than mine. Over on the left there's a big preview. And in the middle, there are thumbnails of filters. To preview a filter on your image just click its thumbnail. And you'll find lots more filter thumbnails in these folders. I'll click the arrow to the left of this folder to open it. And I'll click on one of these filters. Now even if you don't like the look of a filter at first give it a chance, because there's a lot you can do over in the next column where you'll find controls that are unique to whichever filter you just selected. And you can experiment with these controls. What's really special about the filter gallery is that you can preview combinations of filters on your image here. To add another filter, I'll go down to the bottom of the column on the right and I'll click this Create New Filter Layer icon. You can now see that there are 2 copies of Diffused Glow applied to this image. With the top one selected I'll apply a different second filter instead. I'm going to click the arrow to the left of the Texture folder and scroll down a little and click on the Texturizer filter. With this filter, you can choose different textures to add to an image. And you have controls you can use to vary the look. Let's add one more filter to this combination. By going down to the bottom of the column and clicking this icon and then going over and selecting another filter thumbnail. Even if you don't like the look of this at first you can go back to the filter layers where there's now a new layer and click and drag that layer beneath another filter. And get a very different look. You can turn these filter layers off and on temporarily by clicking the Eye icon to the left of any one. So, there's how this looks without that last filter and here's how it looks with the filter. If you really don't like one of the filters you can delete it by selecting it here and then going down and clicking the Trash icon. When you like the preview of a combination of filters you can apply them to the image by going up to the top of this window and clicking OK. That closes the filter gallery window and takes you back to your main Photoshop workspace. Applying those filters has made a permanent change to this image. So regardless of the format in which you save the image now the filters will be baked in and non-editable. If you don't like the filters the only thing you can do at this point would be to undo. As you get better at Photoshop you may decide to give yourself more flexibility by applying filters in a non-permanent way as editable smart filters. As you'll learn how to do in the next video.

What you learned: To use the Filter Gallery

  1. Select a layer that contains content you want to change.
  2. Go to the menu bar and choose Filter > Filter Gallery.
  3. Try the different filters and adjust their settings for the desired result.
  4. Experiment with adding multiple filters in the Filter Gallery and changing their stacking
    order.
  5. Click OK to close the Filter Gallery and apply the filters you chose. You can also filter after you create a selection to apply filters to only the selected area.

Blur an image with Smart Filters

Apply a blur filter as an editable Smart Filter.

Blurring a background image is a great way to draw attention to what's in the foreground. In this video, we'll apply a quick blur to a background. And as a bonus you'll learn how to apply any filter in a non-permanent editable way as a smart filter. Give it a try with this image from the practice files for this tutorial. First let's bring in a foreground image. Go up to the File menu, choose Place Embedded. and navigate to this image in the practice files, and click Place. To make this image smaller hold the Shift key, hover over a corner and drag inward. If you want to reposition this image click inside of the box and drag to where you want it. And you can rotate it too by moving your cursor outside of one of the corners. And when the cursor becomes a double pointed curved arrow, dragging the image to rotate it a little bit. To finish placing the image go up to the Options bar and click the Checkmark. So that's the beginning of a travel composite. If we want to draw more attention to the foreground image – let's try blurring the background image. And we'll do that by adding a filter. Go to the Layers panel and select the Background layer. Then go up to the Filter menu and before you choose a filter, choose Convert for Smart Filters, and click OK. That changes the Background layer into a special layer that will support an editable or smart filter. So, let's go ahead and apply a blur filter as a smart filter. Go back up to the Filter menu, and go to Blur and choose the Gaussian Blur. filter. In the Gaussian Blur dialog box that opens just drag the Radius slider to the right to increase the blur or to the left to decrease blur. With the Preview box checked, you'll see a preview of the blur in the image. If I uncheck that you can see how the image looks without the blur and if I check that: Here's how it looks with that blur. When you're satisfied click OK. Take a look at the Layers panel and you'll see that the background layer has a sub layer underneath it. And that's the smart filter. – the Gaussian Blur smart filter. You can apply any filter the same way. The beauty of using smart filters is that they remain editable. So even if I were to save this file and close it and then reopen it again the Gaussian Blur filter would be here waiting for me to re-edit it if I wanted to. The only thing you have to be sure to do is to save in a format that retains layers like the Photoshop or PSD format. If you do want to re-edit a smart filter just double click its name here in the Layers panel and it reopens. And you can make a change. And then click OK. So, the next time you're applying a filter think about whether you might want to change that filter. And if so apply it as a smart filter and save in the PSD format.

What you learned: To use a Smart Filter to blur a background.

You can use filters to clean up or retouch your photos, apply special art effects that give your image the appearance of a sketch or impressionistic painting, or create unique transformations using distortions and lighting effects. The filters provided by Adobe appear in the Filter menu. Some filters provided by third-party developers are available as plug-ins. Once installed, these plug-in filters appear at the bottom of the Filter menu.

Smart Filters, applied to Smart Objects, let you use filters non-destructively. Smart Filters are stored as layer effects in the Layers panel and can be readjusted at any time, working from the original image data contained in the Smart Object. For more information on Smart Filter Effects and nondestructive editing, see Nondestructive editing.

To use a filter, choose the appropriate submenu command from the Filter menu. These guidelines can help you in choosing filters:

Filters are applied to the active, visible layer or a selection.

For 8‑bits per-channel images, most filters can be applied cumulatively through the Filter Gallery. All filters can be applied individually.

Filters cannot be applied to Bitmap-mode or indexed-color images.

Some filters work only on RGB images.

All filters can be applied to 8‑bit images.

The following filters can be applied to 16‑bit images: Liquify, Vanishing Point, Average Blur, Blur, Blur More, Box Blur, Gaussian Blur, Lens Blur, Motion Blur, Radial Blur, Surface Blur, Shape Blur, Lens Correction, Add Noise, Despeckle, Dust & Scratches, Median, Reduce Noise, Fibers, Clouds, Difference Clouds, Lens Flare, Sharpen, Sharpen Edges, Sharpen More, Smart Sharpen, Unsharp Mask, Emboss, Find Edges, Solarize, De-Interlace, NTSC Colors, Custom, High Pass, Maximum, Minimum, and Offset.

The following filters can be applied to 32‑bit images: Average Blur, Box Blur, Gaussian Blur, Motion Blur, Radial Blur, Shape Blur, Surface Blur, Add Noise, Clouds, Lens Flare, Smart Sharpen, Unsharp Mask, De-Interlace, NTSC Colors, Emboss, High Pass, Maximum, Minimum, and Offset.

Some filters are processed entirely in RAM. If you don’t have enough available RAM to process a filter effect, you may get an error message.

You can apply a filter to the active layer, or to a Smart Object. Filters applied to a Smart Object are nondestructive and can be readjusted at any time.

To apply a filter to an entire layer, make sure the layer is active or selected.

To apply a filter to an area of a layer, select that area.

To apply a filter nondestructively so you can change your filter settings later, select the Smart Object that contains the image content you want to filter.

If no dialog box appears, the filter effect is applied.

Applying filters to large images can be time consuming, but you can preview the effect in the filter dialog box. Drag in the preview window to center a specific area of the image. In some filters, you can click in the image to center it where you click. Click the + or – buttons under the preview window to zoom in or out.

The Filter Gallery provides a preview of many of the special effects filters. You can apply multiple filters, turn on or off the effect of a filter, reset options for a filter, and change the order in which filters are applied. When you are satisfied with the preview, you can then apply it to your image. Not all filters in the Filter menu are available in the Filter Gallery.

How to add photoshop filtersFilter Gallery dialog box

A. Preview B. Filter category C. Thumbnail of selected filter D. Show/Hide filter thumbnails E. Filters pop‑up menu F. Options for selected filter G. List of filter effects to apply or arrange H. Filter effect selected but not applied I. Filter effects applied cumulatively but not selected J. Hidden filter effect

Welcome to the Community!

We have a brand new look! Take a tour with us and explore the latest updates on Adobe Support Community.

Adobe Support Community

  • Home
  • Photoshop ecosystem
  • Discussions
  • how to add filters to photoshop
  • Home
  • Photoshop ecosystem
  • Discussions

Copy link to clipboard

I am used to photoshop cs3. Adding filters to use for that was easy. In this creative cloud version I went to preferences and plug-ins but I don’t have the option to add another folder for plug-ins. I can’t figure out where to do it in this version. Can anyone help? I can get a screenshot of what I see under plug-ins if needed.

  • Follow

1 Correct answer

Copy link to clipboard

What operating system are you using?

You can make an alias to the folder with the plugins and then put the alias in the photoshop cc plugins folder.

Also, be aware that photoshop cc is an 64 bit program if you have an 64 bit operating system and cs3 is an 32 bit program, so plugins from cs3 most likely won’t work in photoshop cc,

The makers of the plugins might have updated 64 bit versions that can be used in photoshop cc.

  • Follow

Copy link to clipboard

I am using windows 10. I just got a new tower. It’s an HP envy.

I’m still confused as to what the whole 64 and 32 bit stuff was all about. lol I’ve about given up on the filters I have. It doesn’t seem that any of them are working.

I’ve even tried installing paintshop pro 9 on my computer so that I could use the filters with that program if I needed to but I can’t even get that program to install. UGH. you would think that getting a new updated tower would be fun.

Welcome to the Community!

We have a brand new look! Take a tour with us and explore the latest updates on Adobe Support Community.

Adobe Support Community

  • Home
  • Photoshop ecosystem
  • Discussions
  • how to add filters to photoshop
  • Home
  • Photoshop ecosystem
  • Discussions

Copy link to clipboard

I am used to photoshop cs3. Adding filters to use for that was easy. In this creative cloud version I went to preferences and plug-ins but I don’t have the option to add another folder for plug-ins. I can’t figure out where to do it in this version. Can anyone help? I can get a screenshot of what I see under plug-ins if needed.

  • Follow

1 Correct answer

Copy link to clipboard

What operating system are you using?

You can make an alias to the folder with the plugins and then put the alias in the photoshop cc plugins folder.

Also, be aware that photoshop cc is an 64 bit program if you have an 64 bit operating system and cs3 is an 32 bit program, so plugins from cs3 most likely won’t work in photoshop cc,

The makers of the plugins might have updated 64 bit versions that can be used in photoshop cc.

  • Follow

Copy link to clipboard

I am using windows 10. I just got a new tower. It’s an HP envy.

I’m still confused as to what the whole 64 and 32 bit stuff was all about. lol I’ve about given up on the filters I have. It doesn’t seem that any of them are working.

I’ve even tried installing paintshop pro 9 on my computer so that I could use the filters with that program if I needed to but I can’t even get that program to install. UGH. you would think that getting a new updated tower would be fun. 😕

Harry Guinness
How to add photoshop filtersHarry Guinness
Writer

Harry Guinness is a photography expert and writer with nearly a decade of experience. His work has been published in newspapers like The New York Times and on a variety of other websites, from Lifehacker to Popular Science and Medium’s OneZero. Read more.

How to add photoshop filters

Lightroom Presets are a popular way to edit images, but if you prefer to use Adobe Photoshop, there’s a way to use them in Photoshop, too—using Adobe Camera RAW (ACR). Let me explain.

Why ACR Is (Basically) Lightroom

How to add photoshop filters

Adobe Camera RAW and Lightroom use the same image processing engine under the hood, with only slightly different user interfaces. This means that Lightroom Presets work in ACR without you having to do any weird tweaks.

In fact, Lightroom Classic and ACR even share the same presets folder. This means that adding presets to Lightroom Classic (but not Lightroom) will automatically add them to Photoshop on the same computer.

However, if you don’t use Lightroom Classic, you can still add presets to Photoshop. Here’s how.

How to Install Presets in ACR

Download and (if necessary) unzip the presets that you want to install. If Photoshop is open, quit it.

How to add photoshop filters

On a Windows 10 PC, open File Explorer, paste the following address into the address bar, and hit Enter:

On a Mac, open Finder, click Go > Go to Folder, paste the following address, and hit Return:

Copy the preset files into this folder.

Now, you can open Adobe Camera RAW, and the presets will be there ready for you to use.

How to Use Lightroom Presets in Photoshop

With the presets installed in the correct folder, it’s time to use them. There are two ways to do it, depending on the images that you’re editing.

On RAW Images

How to add photoshop filters

If you open a RAW image in Photoshop, Adobe Camera RAW will automatically open first. Make any edits that you want, and then click the two overlapping circles icon in the right sidebar (or use the keyboard shortcut Shift+P).

How to add photoshop filters

Find the preset that you want to apply, make any tweaks that you want, and then click “Open” to open the image in Photoshop, where you can finish things off.

Using the ACR Filter

If you don’t shoot RAW images, you can still apply presets to your images using the Adobe Camera RAW Filter—although the results might not be as good.

Open the image that you want to edit in Photoshop and go to Filter > Camera RAW Filter.

How to add photoshop filters

In the right sidebar, click the two overlapping circles icon (or use the keyboard shortcut Shift+P).

How to add photoshop filters

Now, you’ll see a list of all the available presets. Select the one that you want, make any additional tweaks or edits to your image, and then click “OK” to go back to Photoshop.

How to add photoshop filters

If you want to be able to undo or dial down the effects of the ACR filter after you’ve applied it, you should convert your image to a Smart Object first.

  • › How to Change Country or Region in the Google Play Store
  • › Valve Now Bans Steam Games Using Blockchain, NFT, or Crypto
  • › PC Games Are Installing Low-Level Drivers in Windows
  • › How to Use the COUNTIF Formula in Microsoft Excel
  • › Microsoft Abandons Plans for 3D Emoji on Windows 11

How to add photoshop filters Harry Guinness
Harry Guinness is a photography expert and writer with nearly a decade of experience. His work has been published in newspapers like The New York Times and on a variety of other websites, from Lifehacker to Popular Science and Medium’s OneZero.
Read Full Bio »

For any photographer, there are few feelings better than the one you get when you snap that perfect photo.

Unfortunately, even if you capture the ideal moment with the ultimate camera, there’s always a chance that the final image will seem somehow duller or colder than you expected. When this happens, the best thing you can do is turn to a trusty friend: photoshop.

Photoshop is one of the best photo-editing solutions out there for a reason. It gives you all the tools you need to correct errors and enhance your images. With the right tools, you can make sure your snapshots have the color they need.

So, how do you add warmth to photos in Photoshop?

In this article we’ll look at 3 steps you can take, including:

  • Adding curve adjustment layers
  • Adding color balance layers
  • Using the Photo Filter tool

Let’s get started.

Adding a Curves Adjustment Layer

One of the easiest things you can do to add warmth to photos in Photoshop is play with layers and curves.

Start by opening the photo you want to edit in Photoshop and use the keyboard shortcut Ctrl+0 to size the image, so it fits into the entire screen. Next, add a Curves adjustment layer by going to the Adjustments panel and clicking the Curves icon.

Once you’re done, you’ll see a new layer appear, like so:

How to add photoshop filters

With this panel, you can make a couple of adjustments and discover how to add warmth to photos on Photoshop.

First, add some contrast by clicking on the Presets drop-down menu in the properties panel. Choose “medium” contrast to start – you can always increase it later if necessary. Extra contrast will help to give your photo some definition.

Next, retouch your photo slightly by clicking on the drop-down called RGB. This is where you can begin to remove some of the cold blue tones in your picture and replace them with soft yellows, reds, and oranges.

Adding Your Color Balance Adjustment Layer

The color balance adjustment layer is where you really start adding heat to your image.

To activate the adjustment layer, head to the Adjustment panel again and click on the Color balance icon. The following panel should open:

How to add photoshop filters

Orange is the color that you want to really add warmth to your pictures.

To obtain an orange glow, reduce the blue line so that it moves more towards yellow, and pull the cyan towards the red. The top slider should have a value of around +25, while the bottom slider has a value of -25. Feel free to place around those numbers as you see fit.

Consider blurring the edges of your photo to give it a more glowing, ethereal look.

Using the Photoshop Photo Filter

Alternatively, if you’re looking for a quick and simple way to add warmth to photos in Photoshop, you could try the Photo Filter command.

This tool is specifically designed to help adjust the temperature of your images, and it’s incredibly easy to use.

To use the photo filter, start by opening your image in Photoshop, and heading to the Adjustments tab. If you only want to add the filter to a section of the photo, like a person or the sky, then you can select that area using the Lasso or Pen tool first.

If you want to apply Photo Filter to multiple layers, click on Layer > New Adjustment Layer > Photo Filter.

How to add photoshop filters

When the Photo Filter dialog box appears, you’ll be able to click on the Filter button and choose either a pre-set warming filter or a custom color, depending on the effect you’re looking for.

Remember to click on the checkbox that says Preserve Luminosity if you want to make sure that you maintain the right balance of brightness and contrast in your image.

Once your Filter is applied, you can use the Density slider on the pop-up box to control exactly how much warmth you add to your image. The higher your value, the more obvious your color will be.

There you have it – everything you need to know about how to add warmth to your photos in Photoshop, without having to worry about things like Gradient and tone maps!

For more tips and advice on how to make your photos stand out, remember you can find us on Facebook and Twitter.

Using WordPress and want to get Envira Gallery free?

Envira Gallery helps photographers create beautiful photo and video galleries in just a few clicks so that they can showcase and sell their work.

Related Posts

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

How to add photoshop filters

Comments

An outstanding share! I have just forwarded this onto a co-worker who has been doing a little research on this. And he in fact ordered me breakfast because I stumbled upon it for him… lol. So allow me to reword this…. Thanks for the meal!! But yeah, thanks for spending the time to talk about this subject here on your blog.|

Your blog may have saved my bacon. Error on my part: Left the kitchen lighting on while natural light streamed in. Rookie mistake I need to fix post, so I am grateful for you sharing your knowledge.

Get the picture you want with the industry standard in photo editing tools. From major color adjustments to minor blemish removal, Photoshop gives you the power to realize your vision.

Transform your raw photos.

Make old photos look new, new photos look old, and all photos look better with Photoshop tools and filters.

How to add photoshop filters

Add drama by subtracting color.

Create customized black-and-white effects by creating a Black & White adjustment layer. Darken or lighten the gray values of particular colors for better contrast.

How to add photoshop filters

Go retro with artistic filters.

Add film grain from the Artistic submenu in the Filter Gallery or add noise to simulate dirt or scratches on an old photo.

How to add photoshop filters

Create painterly effects.

Give your photo a handmade look with a wide selection of Brush Stroke filters. Simulate a pointillist painting by applying a Pixelate filter, or create a collage effect with a Cutout filter.

How to add photoshop filters

Retouch to become everyone’s favorite photo editor.

Make all the subjects in a group portrait happy by removing blemishes with the Spot Healing Brush tool. Create a new layer to work on so your edits remain nondestructive.

x.png?v=1632917495″ alt=”Tutorial: How to Add a Sepia Filter in Photoshop” width=”” />

Why Use Photoshop to Get the Sepia Effect

How to add photoshop filters

One great thing about Photoshop is that you can work on layers for non-destructive editing of your images and go back to the original version whenever you want. Photoshop has many tools to give your image the sepia tone, and you can choose from the options available based on your requirement. However, Photoshop also has a sepia filter that can help you get the job done quickly and more easily.

Ways to Add a Sepia Filter in Photoshop

Before adding the sepia filter to your selected image, you’d first need to convert it to a black and white or monochromatic image. You can do so by desaturating your image or adding the black and white adjustment layer to it. Here’s how you can do that.

1. Desaturate Image for a Monochrome Look

How to add photoshop filtersImage Courtesy: ShootDotEdit Customer @brandiallysephoto

Open your selected image in Photoshop and click on the Image drop-down menu and choose the Adjustments option. From the side menu, select Desaturate. You can also use the shortcut keys Shift + Ctrl + U on Windows or Shift + CMD + U on Mac. This way, you will be able to convert your image to monochrome quickly. However, this process will leave you with little control over the results you obtain. Also, this method is considered destructive because you won’t be creating any new layer for editing. If you want your edit to be non-destructive, you can try the adjustment layer method mentioned below.

2. Add Black and White Adjustment Layer

How to add photoshop filters

To add the black and white adjustment layer, go to Layer and click on the New Adjustment Layer option. From there, choose Black and White. You will get a monochromatic version of your image, but Photoshop will also allow you to make changes to each color channel. If you want, you can brighten or make the reds or blues in your chosen image darker. The difference between the two methods of desaturating your image will depend on the colors in your image and how much you adjust them.

3. Use Sepia Filter Adjustment Layer

How to add photoshop filtersImage Courtesy: ShootDotEdit Customer @brandiallysephoto

Once you’ve created a black and white image, you can add a sepia tone to it. The Photo Filter Adjustment Layer is one of the most popular methods of giving your images a sepia effect. Begin by going to the Layer drop-down menu and then click on the New Adjustment Layer option. In the menu that opens up, you will see Photo Filter. Click on it and select the Sepia setting from the filter settings. To adjust the strength of the tint, you can use the Density slider. If you don’t like the specific sepia tint, you can click on the Color button and select the colored square. From here, choose a different tint. If you want to brighten the whites, tick the Preserve Luminosity box.

4. Use Colour Fill Layer

How to add photoshop filters

You can apply a Color Fill layer to your selected image to add a sepia tone to it. To do so, you’d need to go to the Layer option and then select New Fill Layer from the drop-down menu. Here, you can choose Solid Color, click OK and pick a brown shade of your choice. You can experiment with different shades until you zero in on the one that gives your image that desired look. Next, select blend mode to fine-tune the effect. Each blend mode will give you a different look, and if you think the sepia effect you’ve got is too strong, you can lower the opacity of the layer.

5. Work With Hue/Saturation Layer

You can also add the sepia effect to your image through the sepia preset in the Hue/Saturation adjustment layer. Click on the Layer option in Photoshop and then, from the drop-down menu select the New Adjustment Layer. Now, go to Hue/Saturation. Here, in the Presets, you will see the Sepia option. Select it and you are done! If you aren’t satisfied with the look of your image, you can always adjust the color of the sepia, the saturation, and the exposure in your image.

6. Color Balance to Create a Sepia Tint

How to add photoshop filtersImage Courtesy: ShootDotEdit Customer @brandiallysephoto

The Color Balance adjustment layer can also help you get the sepia effect in your image. Just like in the earlier methods, you’d have to go to the Layer option and select the New Adjustment Layer once again. From here, you can pick the Color Balance option. Now, select the Midtones; reduce the yellow slider and raise the red slider, and you will see the difference. This way you will be able to fine-tune the color of your sepia. You can also tint highlights and shadows to get the look you want for your image.

While the steps discussed above can help you add the sepia filter in Photoshop, the results may differ depending on the mix of yellows and reds you use to create the tint. However, both the Color Fill and the Photo Filter methods can tint the whites in your image much more than the other methods. So, practice and experiment with the tools to choose the one that suits you best and helps you give the perfect sepia glow to your images.

At ShootDotEdit, we love helping you with tips and tricks that help you excel as a wedding photographer. If you want to learn more photography-related techniques, you can check out our other blogs. Besides this, we offer professional photo editing services to match your style and lessen your workload. To learn more about our services, take a look at our pricing plans.

Using the photo filters has now become a trendy option to enhance the appearance of your photos. Whether you need the photos for the professional or personal use, using the filters makes the difference in your photos. There are many software and apps which are available for different types of operating systems including windows, Mac, IOS and Android to edit the photos. Photo filters are generally available with the photo editing tools so you are required to choose the best photo editing tool for your device.

  • Part 1. Top 10 Photo Filters Free to Download
  • Part 2. How to Use Fotophire Editing Toolkit to Add Photo Effects

Part 1. Top 10 Photo Filters Free to Download

In the present time, there are so many types of photo editing software which can be downloaded on your PC. Most of the professional as well as amateur photographers and the photography enthusiasts look up for the best type of photo editing software. This enables them to edit the photos according to their requirements. If you want to add filters and effects then the best quality of downloadable photo editing software is the best. Downloadable software is preferred by the PC users as they don’t have to search every time for the best image editor when they need to add filters to the photos.

1.Fotophire Editing Toolkit

This software can be used on Windows and Mac PC and allow the users to use a variety of tools for editing photos. It provides an easy way to edit and add filters to your photos to make them look artistic, impressive and different from the others. More than 200 of effects are there that can be added to your photos with the help of this software. Intensity of each overlay can be precisely adjusted.

In this tutorial, we look at how to add light in Photoshop. To illustrate the lighting effect, we will be using a landscape photo, but you can apply the same techniques to any photo. You can use these same principles in all kinds of ways from lighting a lightbulb to casting directional light where there wasn’t any. The best advice is to learn the techniques and then experiment with adding types of light effect to different photos.

Here is a simple example using the technique in this tutorial to add a new light source to the top left of the image. The image on the left is the starting point where the image on the right shows additional side light. Notice how natural this appears.

Creating the Components of Light

To add light in Photoshop, we need to introduce and control three elements:

  1. Brightness or luminosity to lighten the area where we want to pain the light.
  2. Blur or diffusion to create the glowing effect of the light we are painting.
  3. Colour and saturation if it’s necessary to introduce colour to the glowing light.

There are lots of ways we add elements in Photoshop but one of the easiest to start with is the Photoshop Camera Raw Filter. You may also hear this referred to as ACR or Adobe Camera RAW.

Using the Photoshop Camera Raw Filter to Add Light

Before we can use the Camera Raw filter in Photoshop to add our light effect, we need a duplicate layer to apply the effect to. This allows us to use it as a Smart Filter which makes it a non-destructive edit.

If the image you’re working on only has a single background layer, then you can duplicate it. Do this in the Photoshop Layers window, by clicking the layer to select it. You can then right-click on the layer with your mouse and select “Duplicate Layer…” from the popup menu. Alternatively, use the keyboard shortcut “Cmd + J” on a Mac or “Ctrl + J” on a PC.

Next, we convert the new layer to use Smart Filters. The benefit of using Smart Filters in Photoshop is that they will retain your adjustments so you can change them in the future. Photoshop applies regular filters directly to the pixel in the image, preventing you from adjusting the filter later.

To convert the layer, select it by clicking it in the Photoshop Layers window. Then in the Photoshop “Filter” menu select the option “Convert for Smart Filters”. If you see an information dialog displayed click “OK” to continue. After a few seconds delay, you will see an icon appear to the bottom right of the layer thumbnail. This indicates the layer is ready to use Smart Filters.

Adding the Light Source in Photoshop Camera RAW

We now need to open Photoshop Camera Raw filter on the new layer to add the light.

Select the layer in the Photoshop Layers window if it’s not already selected. Then in the Photoshop “Filters” menu select the “Camera Raw Filter…” option. You will then see the Camera Raw filter dialog as shown here.

How to add photoshop filters

In the Camera Raw filter select the Radial Gradient option on the right side of the interface (1). You then use this to draw a selection on the image. This is the area that will become the light source (2).

To help you see the area covered by the light you are adding, it’s helpful to turn on the Mask Option (3). This covers the unselected area with a coloured overlay. If you find the selection is the opposite to what you want, click the “Invert” option.

Finally, you can refine the selection using the “Feather” slider (4). This helps to blend the selection across the image for a natural appearance.

When you’re happy with the selection, untick the “Mask Options” to hide the coloured mask.

Adding the Light Effect with the Camera Raw Adjustments

Remember the three components of the glowing light effect we discussed at the start of the tutorial. It’s now time to apply these using the controls of the Camera Raw filter:

  1. For the Brightness element, increase the Exposure and Contrast sliders. If this causes problems with the highlights becoming too bright, try reducing the Highlights or Whites slider.
  2. To create the glowing or soft diffused effect, use the Clarity and Dehaze sliders. Moving these to negative values can soften the image as well as lighten the area further.
  3. To add the colour to the area, you could use the Temperature and Tint sliders.

Here’s a screenshot of the adjustments I applied to add the light.

How to add photoshop filters

Another way to add colour to the light is the “Color” overlay you will find at the bottom of the Radial filter controls. This is more flexible than using the Temperature and Tint sliders as you can pick any colour.

Scroll down to the bottom of the Radial Filter controls in Camera Raw and you will find the “Color” option. Click the icon to open a colour picker tool where you can select the colour to use.

How to add photoshop filters

When you select a colour, you will see it applied to the selected area and it also appears as a swatch in the “Color” section. When you are happy with the colour and level of saturation, click the OK button to close the picker.

You can then click OK to close the Camera Raw filter and return to Photoshop.

Refining the Light Effect

Sometimes you will find you return to Photoshop and feel you need to refine the adjustments further. Because we converted our lighting effect layer for use with Smart Filters, we can reopen the Camera Raw filter. You can do this by double clicking the “Camera Raw Filter” in the Photoshop Layers window. You will find it under the new layer you created. This opens the filter again and you will see the adjustments you previously applied.

Another useful option when adding a light effect is to use the Luminosity Range Mask with the Radial Filter. You can use this to prevent Photoshop from applying the effect to the shadow areas. This could create a more natural effect with some images.

A third and much more powerful option is to use Luminosity Masks to control where the effect is visible. You can do this by painting on a layer mask through a Luminosity Selection. Luminosity Masks can be quite complex to create but there’s a free Photoshop Extension that removes a lot of the effort.