How to access a router

Here's how to sign into your router to change your home network's name, password, and other information.

How to access a router

Your router stores the settings for your home Wi-Fi network. If you want to change something on your network, you have to log into your router’s software, also known as firmware. From there, you can rename your network, modify the password, adjust the security level, create a guest network, and set up or alter a variety of other options. But how do you first get into your router to make those changes?

The process for logging into your router should be the same whether you use your internet provider’s router or you purchased your own router. It should also be the same whether you use a dedicated router or a combination modem/router supplied by your provider.

Find Your Router’s IP Address

You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of But that’s not always the case, so you may first want to confirm the address of your router.

To find your router’s IP address, type cmd in the Windows search bar and press Enter to open the command prompt. Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter. That’s your router, and the number next to it is your router’s IP address. Close the window when done.

In Windows 10, you can also go to Settings > Network & Internet > Status > View hardware and connection properties. The next screen displays details for your different network connections. Scan the entry for Ethernet or Wi-Fi and look for the Default Gateway setting to find your router’s IP address. Once you have the correct IP address, type it into your browser’s address field and press Enter.

Username and Password

After you type the IP address, you’re asked for a username and password to access your router’s firmware. This is either the default username and password for your router, or a unique username and password that you may have created when you set up the router.

If you created your own username and password, login in with these credentials. However, if you don’t remember your login credentials or you never changed them from the unit’s default, signing in becomes a bit trickier. Some routers offer a password-recovery feature. If this is true of your router, this option should appear after you enter the wrong username and password a certain number of times. Typically, this window will ask for your router’s serial number, which you can find on the bottom or side of the router.

If you never changed the router’s login credentials, many use a default username of admin and a default password of password. Try that combination to see if it works. Otherwise your best bet is to run a web search for the default username and password of the brand of your router, such as Netgear, Linksys, Asus, or TP-Link.

Another option is check out the Router Passwords website, where you can select the manufacturer of your router to get a list of default usernames and passwords. Use each of the suggestions to try signing into your router.

If you still can’t log into your router’s firmware, you’ll need to reset the device to revert all settings back to their defaults. You’ll usually find a small reset button on your router. Use a pointed object, like a pen or paper clip, to push in and hold the reset button for around 10 seconds. You should now be able to log into your router using the default username and password.

Change Router Settings

After you gain access to your router’s firmware, you’ll be free to change whatever elements should be modified. These include the network name and password, the security level, and the Wi-Fi password. You can also set up parental controls, create a guest network, and manage attached devices. Just remember to apply any changes before you move on to the next screen.

Documentation and built-in help should be available to assist you with the different options if you’re not sure how to set them. Most current or recent routers also have setup wizards that can take care of some of this labor for you.

Change Router Login

As one example, you should change your router’s username and password from their default values. Doing so better secures your router so only you can access the firmware. With some routers, you can change both the username and password. With others, only the password can be changed, while the username is typically stuck as admin.

How to access a router

Sometimes you need to know how to access your router’s settings. But really, that moment comes along so infrequently that it’s easy to forget just how to do so.

If you’re like most Americans with broadband Internet, you probably have a router at home which broadcasts the Wi-Fi network that your devices use. Many people rent a modem from their Internet provider which has a Wi-Fi router built in, but it’s also common to buy one of the best cable modems and router to avoid paying your ISP rental fees. Plus, the best Wi-Fi routers offer great performance and extra security features.

No matter what router you have, when you want to fiddle with its settings you’ll almost certainly need to dial into it remotely using a web browser on a device connected to its Wi-Fi network.

This can be a tricky process, as you’ll need to find your router’s IP address to access it at all, and then provide the proper username and password to log in and start changing settings.

Following the steps outlined below, which are written with the assumption you have access to a Windows PC, should make the process a little smoother. If you run into any issues, contact your router’s manufacturer for help with troubleshooting.

How to access your router’s settings: Check your IP address

1. To change your router’s settings you’ll need to be able to talk to it, and to do that you need to know its IP address. Many routers use as their default IP address, but yours might be different.

To find out for sure, connect a PC to your router’s Wi-Fi network; this is most easily accomplished with a laptop, since many desktop PCs don’t come with Wi-Fi connectivity built in.

2. Once you have a Windows PC connected to the Wi-Fi network in question, open the Command Prompt (most easily accomplished by hitting the Start button and typing “command”, then selecting Command Prompt from the results) and type ipconfig into the command line.

Scroll down the results until you see a section that reads Ethernet adapter or Wireless LAN adapter; this is your connection to your router, and the address listed next to Default Gateway is your router’s IP address.

Bonus: If you’re running Windows 10 you can look up your router’s IP address without accessing the Command Prompt. Instead, open the Network & Internet section of your Windows 10 Settings menu by hitting the Start key and typing “settings”, hitting Enter, and then navigating to Network & Internet > Status > “View hardware and connection properties.”

Scroll down the Properties list until you see an entry for Default gateway — the number listed next to it should be your router’s IP address.

How to access your router’s settings: Log into your router

1. Once you know your router’s IP address, logging in should be pretty easy: simply type the IP address into the address bar of your browser, and your router should send you to a page asking for your login and password.

Remember, you have to do this on a device connected to your router, either via Wi-Fi or an Ethernet cable!

2. Ideally you remember the login and password for your router, so this part is smooth sailing. But we live in a world of realities, not ideals, and the truth is most of us have a hard time remembering our router login details.

If you can’t remember your username and password for the router, take heart: you may never have established any, so you may be able to log in using the router’s default username and password.

Many routers ship with admin and password as their default username and password, respectively; if those don’t work on your router, you can also try looking it up on Router Passwords, which maintains a large database of default router logins.

3. If you can’t seem to find the correct username and password to log into your router, you should be able to reset it instead. Some routers offer an option to help you recover your password, often triggered once you fail to log in correctly. This often requires providing your router’s serial number, which can typically be found on the back or bottom of the router.

Other routers just tell you to reset the router if you can’t remember your login credentials, which is usually accomplished by pressing the router’s reset button for ten seconds. Most routers have small reset buttons inset into their back or bottom, though you’ll often need a pen or paperclip to press and hold the button down.

Once you’ve reset the router, you should be able to log into it with the manufacturer’s default username and password.

How to access your router’s settings: Change router settings

1. Once you’ve logged into your router via a connected browser, you should have free reign to change whatever settings you wish. Most modern routers will offer an array of tweakable options in a simplified graphical interface, so it should be pretty straightforward to change settings like the Wi-Fi password, the Wi-Fi network name, which websites are blocked, whether there’s a guest Wi-Fi network, and more.

Many modern routers offer automated guides to at least some of these settings, and we recommend you consult the router’s documentation (or Google) before changing anything you don’t understand.

If something catastrophic happens and your router no longer works the way you want, you can always reset it (using the afore-mentioned reset button) back to factory default settings.

2. Once you’ve accomplished whatever you came to do, consider taking a moment to look over your router’s security settings and make sure they’re up to snuff.

For example, if you’re still using the router’s default username and password, you should change them post-haste — if you can look up your router’s login details on the Internet, other people could too!

Check out our guide to how to secure your Wi-Fi and improve your router’s security for more ideas on how to improve your network’s defenses.

How to access a router

This page is to provide home network user’s a general resource on how to access their router setup or console so they may adjust the settings. Because of how many different routers there are available today, not all of the steps below may apply to you.

You can skip all of the steps below by trying the most common IP router addresses. Click either,, or to open a new window in your browser with the router setup. If these links do not work, follow the steps below.

Determine router address

Before being able to access a router, you must determine its IP address by following the steps below.

Microsoft Windows users

  1. At the command prompt type: ipconfig and press Enter . See information displayed that is similar to the example below.
  1. If you have multiple network adapters, make sure you are looking in the Ethernet adapter section. The Default Gateway address is the IP address of the router connected to your computer. In the example above, the IP address we want to remember is

If you have multiple routers in your home or business, such as a cable and wireless router skip to the multiple router users section below.

Linux users

Linux users can follow the same steps listed above for Windows users. However, instead of using the ipconfig command in the console, you would want to use the ip command and view the information for inet. For example:

Multiple routers

If you are using multiple routers in your network setup, make sure you the IP address that corresponds to the router you want to access. If can’t find the router you’re currently connected to, you can try performing a traceroute.

To perform a traceroute using Microsoft Windows, type: tracert If you are using Linux, type: traceroute Either of these commands provide you with output similar to the example below.

As you can see in the above example, the first two hops are the internal routers. If we want to look at the router connected to the Internet the address, we would remember the address is

Accessing the router

Once you have determined the IP address of the router you want to access, open an Internet browser window and in the address bar, type the IP address. So, if your IP address was enter “” in the address bar.

If accessible, you’ll be prompted for a username and password. If you do not know this information, the username and password are likely set to default, which should be changed. The default information for your router is in the router documentation. Often, it is either "admin" or "administrator" for both the username and password or the username with no password.

After entering the proper username and password, you’ll have full access to the router and be able to manage its settings.

Unable to access

If you cannot access the router using the steps above, try pinging the router IP address by typing: ping (enter your router IP address if it’s different) into the command prompt or console.

If you do not get a response, check your network connections.

If you get a ping response back but cannot access the router through the above steps, your router settings are accessed differently. Alternatively, you can try telneting to the router.

Access your router’s settings with this simple guide.

Accessing your router’s settings may seem daunting and highly technical, but logging in to your router is actually a simple process. We’ll walk you through each step so you’ll be switching up your network settings, changing Wi-Fi passwords, and updating your firmware in no time.

Here are the three steps for logging in to your router:

Pro tip:

If you’re logging in to your router to troubleshoot speed issues, take an internet speed test first. That way you’ll know your baseline and can compare results as you tweak your settings.

1. Connect to your router

You can connect to your router in two ways: wirelessly or using an Ethernet cable . If you’re using your home internet right now, then you’re already connected to your router.

2. Get your router’s default IP address

This is the most technical step in this whole process, but it’s not complicated. The good news is that you may have what you need already printed right on the router. For instance, Linksys provides a simple web address——on the bottom of its routers. Just type that into a web browser, and you’re good to go.

If the router’s IP address or URL isn’t printed on the router, then you’ll need to get your hands dirty. The easiest way is to search “[router model] default IP” in a search engine. If you come up empty-handed, you can obtain the address through your device’s operating system, as we will outline below.

Pro tip:

Routers have two IP addresses. Your internet modem assigns a “public” address to your router, called the Wide Area Network interface (WAN). The second is a “private” address facing your home network, called the Local Area Network interface (LAN). The “private” address is what you need to access the router’s settings.

Finally, most modern routers provide mobile apps for accessing their settings, like TP-Link Tether , Xfinity app , or D-Link Wi-Fi . These apps typically provide the router’s LAN IP address. For instance, the Linksys app places this information in Advanced Settings > Local Network Settings.

Find your router’s IP address in Windows

How to access a router

Step 1: Right-click on the Start button and select Windows PowerShell on the Power User Menu.

Step 2: The Windows PowerShell window appears on your screen. Type “ipconfig” and press the Enter key.

Step 3: Write down the number displayed next to Default Gateway. That is the private IP address you need to access the router’s settings.

Find your router’s IP address in MacOS Big Sur

How to access a router

Step 1: Click on the Apple logo in the upper left corner and choose System Preferences. Alternatively, click on the System Preferences icon located on the Dock (if available).

Step 2: Select Network.

Step 3: Select your network listed on the left—Wi-Fi or Ethernet.

Step 4: Click on the Advanced button.

Step 5: Select the TCP/IP tab.

Step 6: Write down the number displayed next to Router. That is the private IP address you need to access the router’s settings.

Find your router’s IP address on Android

How to access a router

These instructions apply to stock Android 11, although we add steps for Samsung phones. These instructions may be slightly different on Android devices from HTC, Lenovo, and 16 other smartphone and tablet manufacturers.

Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the Cog icon.

Step 2: With the Settings panel open, tap Network & Internet. On Samsung phones, tap Connections instead.

Step 3: Tap Wi-Fi.

Step 4: Tap on the Cog icon listed next to your network.

On Samsung phones, skip to Step 6.

Step 5: Tap Advanced and write down the number listed under Gateway. That is the private IP address you need to access the router’s settings.

Step 6: Tap Manage Router and select a web browser.

Step 7: Write down the number displayed in the address bar. That is the private IP address you need to access the router’s settings.

Find your router’s IP address on iOS and iPadOS

How to access a router

Step 1: Tap to open the Settings app.

Step 2: Tap Wi-Fi.

Step 3: Tap on your network.

Step 4: Write down the number displayed next to Router. That is the private IP address you need to access the router’s settings.

3. Log in using a web browser

Now that you have the router’s IP address, open any web browser and type (or paste) the IP address into the address bar. Your router’s login panel will then load within the browser window.

If this is your first time, you’ll need the router’s default login credentials. You can find this information in your router’s user manual, printed on a label stuck to the device, or by searching the internet.

Try this first to see if you can gain access:

User name: admin

Password: password

Many routers use this combo as the default username and password, so it’s worth a go if you don’t know your login info off the top of your head. Just remember to change it to something more challenging to guess once you’re in.

Pro tip:

If you previously set a custom username or password and can’t recover them, hard reset your router—holding down the recessed Reset button for about 10 seconds should do the trick. After that, you can use the default login credentials. Keep in mind that a hard reset will reset your Wi-Fi network and password as well.

Other router resources:

Are you looking for a better internet plan? Check out all the providers, speeds, and prices in your area.

How to access a router

Once you‘ve accessed your router, you can change wireless network name and password, configure advanced features like Parental Controls and Guest Network, set LED Schedule of your router and so on.

Step 1 Connect your device to a Wi-Fi router

Method 1: Connect via an ethernet cable (for PC only)

Directly connect the computer to the router’s LAN or Ethernet port via a network cable.

Method 2: Connect via Wi-Fi settings (for PC or smart device)

1. Locate the SSID (Network Name) and Wireless Password printed on the label of the router.

2. Go to the Wi-Fi settings of your PC or smart device. Select the SSID and then enter the corresponding password to join the network.

Method 3: Connect via QR code (for smart device only)

Find the QR code printed on the label of the router. Scan it with your phone or tablet to join the preset 2.4 GHz Wi-Fi d irectly .

Note: If you want to connect to a 5 GHz Wi-Fi, try Method 2.

Method 4: Use the WPS button (for WPS-supported device only)

Wireless devices that support WPS, including Android phones, tablets, and laptops, can connect to your router through this method.

WPS is not supported by iOS devices. And, the WPS function cannot be configured when the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS.

  1. Enable the WPS feature on your device’s Wi-Fi settings by tapping a WPS icon or select a WPS Connection option.
  2. Within two minutes, press the WPS button on your router.

Step 2 Log in to your router’s web management page

Open a browser and visit to log in to the router. Create or enter the login password Then click Let’s Get Started to log in. After a successful login, you can explore the router’s option.

Note: If you are not familiar with some parameters, please keep the default settings or consider reviewing the user guide of your product model. For technical support and documentation, visit .

If the login window does not appear, please refer to the Why fail to access .

If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using your TP-Link ID.

Advanced: remotely manage your router via Tether app

But what if you want to check network status or change settings when you are not at home?

TP-Link Tether provides the easiest way to remotely access and manage network devices through your iOS or Android devices. From setup to advanced functions, Tether provides a simple, intuitive user interface to check the status of your networking device, who’s online and what their privileges are. Besides, more personal settings for your network can be configured with TP-Link Tether.

Note: If you want to remotely manage the router via a web browser, refer to How to set up Remote Management on the Wi-Fi Routers for detailed configuration.

If you have questions about how to connect to your router this guide will help by walking you through the process and explaining, in detail, everything that you need to know in order to log in.

Router sitting on a table with cables connected in back.

The first thing to know is that your router has an address on your home network (also known as an internal IP address). If you know your router’s internal IP address, you can type it into your web browser to connect to your router.

Windows 10

If you do not know what your router’s IP address is, you can look at your network to figure it out. If you are on a PC using Windows 10, there is a shortcut to finding this information.

First, click on the Windows key then go to the Settings menu (you may have to click on the gear icon.)

Windows key on a keyboard

Next, click on Network and Internet. In the Status section, click on View hardware and connection properties.

View hardware and connection properties of Settings menu in Windows 10

Look under Ethernet or WiFi and you should see the Default gateway listed. This is your router. Copy the number next to the default gateway, this is your router’s internal IP address.

Default gateway Windows 10 example

The second thing that you need to know in order to connect to your router is that you can access your router through your browser. Paste the router’s internal IP address into the address bar of your browser and press enter.

Example browser window

You should now see the login screen for your router. The last thing that you need to know to log into your router is your username and password.

Login screen of example router

If you are having trouble logging in to your router, check out our router password guide.

Older Versions of Windows

Additional instructions if you are not using windows 10: you can access the command prompt by clicking on the Windows key and then typing cmd.

Click on Command Prompt App.

Command prompt app int the windows menu

Type ipconfig and press enter.

Command prompt with ipconfig command entered

Details about your network are now listed. Look for the Default gateway under Ethernet or WiFi. Copy the number next to the Default gateway (this is your router’s internal IP address.)

Command prompt with ipconfig network details and default gateway

Paste the number into your browser’s address bar and press enter. You can now log in to your router with your username and password.

If you do not know your router’s username or password, you can find it in our Router Passwords List.

After logging in to your router, you can make changes to your router’s settings.

Person typing in username and password for router login

More From Port Forward

How to Port Forward in Your Router for Phantasy Star Online 2: New Genesis

Help improve your connects in Phantasy Star Online 2: New Genesis by forwarding some ports in your router.

Forward Ports on Your Router for Darkest Dungeon

You can help improve your online multiplayer connections in Darkest Dungeon by forwarding some ports in your router.

For Honor Port Forwarding

Help improve your online connections and make connecting with others easier in For Honor by forwarding some ports.

Forwarding Ports for Chicory: A Colorful Tale on Your Router.

You can forward some ports in your router to help improve online connections for Chicory: A Colorful Tale.

Create a Port Forward for Wave Break in your Router

Forwarding some ports for Wave Break can make it easier to play with others and help improve your connections.

Forwarding Ports for Knockout City on Your Router.

Help improve your online connections in Knockout City and connect with more players by forwarding some ports.

Port Forwarding for Dying Light 2: Stay Human

You can connect with friends more easily and help improve connections in Dying Light 2: Stay Human by forwarding some ports.

Creating a Port Forward in Your Router for Far Cry 6

You can help improve your online experiences and more easily connect with others in Far Cry 6 by forwarding some ports.

How to access a router

At work, I often log into routers, and over the years I have dealt with a lot of problems surrounding this.

Now I share my experience with you about how I as a network engineer access routers, and how to troubleshoot potential issues with doing so.

So keep reading to learn how to login to your router.

How To Access Your Router

To log in to your router follow these steps

  1. Make sure you have connected your device to the your routers internet.
  2. Type in in any web browser and press enter (if that doesn’t work try or
  3. Log in using the username “admin” and the password “password” (try “admin” as password if it doesn’t work)

If any of these steps didn’t work. Then you can read more about potential issues for every step below.

Can’t Connect To Your Wi-Fi

If you need to login into your router because you must change the Wi-Fi password you have a problem. Because for you to be able to login to your router’s admin panel, that device needs to have a connection to the router. Here are some things you can do to solve the problem.

Check the Router

If no one has changed the Wi-Fi password since the router was new then the password will be on a sticker on your router. Usually on the bottom of the router or on its back. If someone has changed the password and you don’t remember what it is then you have two other options.

Use an Ethernet Cable

How to access a router

The first one is to use an ethernet cable to connect a device to your router. This is the easiest option as you only need an ethernet cable and a device that you can connect it to.

Factory Reset the Router

If you don’t have any of the two you can also factory reset your router. This will reset the router to its factory settings and the password on the sticker will now work. Keep in mind that this will disconnect all the devices connected to the router.

To reset a router find the small hidden button in the router and press it in for around 10 seconds using a toothpick or a needle. [1]

For a more detailed guide, check out how to reset your router.

Using the Wrong IP

If no of the IPs provided worked for you then you must check your IP yourself. I will outline how to do that for some common devices.

Find Your IP on Windows

  1. Click the windows icon in the left corner of your screen or press the Windows key
  2. Search for ”Command Prompt” and start it.
  3. Type in “ipconfig” and press enter.
  4. Find the Default Gateway line and write the number down. That is your router’s IP address.
  5. Use the IP address you found and type it in a web browser and log in.

Find Your IP on Mac

  1. Click on the Apple logo on the top left of your screen and choose System preferences.
  2. Press Network.
  3. Select the network you have a connection with from the options on the left side (needs to be the router’s network).
  4. Press on the Advanced button on the bottom right
  5. Pick TCP/IP from the options across the top of the box.
  6. You will see your routers IP address listed under IPv4 Address
  7. Use the IP address you found and type it in a web browser and continue with the next steps.

Find Your IP on an Android Device

  1. Go to settings and select Network & Internet
  2. Click on Wi-Fi and press your router’s network (you need to have a connection with it)
  3. Go to advanced.
  4. You can see your router’s IP address under Gateway.
  5. Use this IP address in your browser and continue with the next step.

Find Your IP on an iPhone

  1. Navigate to settings and press on Wi-Fi
  2. Select your router’s Wi-Fi (you need to have a connection with it).
  3. There you find your IP on “Router”.
  4. Use this IP address in your browser and continue with the next step.

Other Solutions

If you have your router’s IP address and it still doesn’t work. Then you can first try to disable your firewall temporarily. Sometimes third-party firewalls (not Windows) can stop you from accessing your router’s admin panel. [2]

Another thing you can do is to try with another browser. In some cases, you can have some program or setting on the browser which prevents it from being able to access your router’s interface.

It is also worth making sure that you have the right permissions on your user. Sometimes parenting controls and such will stop a user from being able to connect to the routers admin panel.

Can’t Log In

How to access a router

Some routers have a password recovery feature. If your router has it, you should see it when you enter the wrong username or password. Most often they will ask for your router’s serial number. You can find it at the bottom, or the back of your router.

If your router doesn’t have a password recovery feature. Then I recommend checking your router’s brand and model number (you can find these on the router). Thereafter, go to

There you can choose your brand (they call it manufacturer) and press enter. Then look for your model number. On the row, you find your model number you will also find the router’s default username and password. Try using these.

If that doesn’t work then someone has changed the password for your router. And if you have no way of learning this password you need to factory reset your router. This will return the router to its default settings, password and username included. [3]

This is the last option as it will disconnect all the devices previously connected to the network.

You reset your router by pressing the small hidden button on it for around 10 seconds. Press it using a toothpick or a needle.

Bottom Line

I hope this helped you access your router’s admin panel and solved any issues you have related to it.

If you have plans to buy a new router, then I recommend to check out my list of best routers for each internet service provider

You must be wondering how can I have access to my router even If I am not around it. If so, then you have come to the perfect place. I will be showing you how to configure your routers to access those remotely from anywhere in the world.

Let’s go through the basics first. To access any device from the internet, you must have the IP address of that device. Now whenever you go to a browser to open a website, the browser does nothing but requests an IP address corresponding to the website name. The system will be forwarding a DNS (Domain Name System) lookup request to the DNS server configured by your ISP. You can manually choose your DNS server also by configuring the same on your PC.

Every time your routers go for a reboot, the ISP will be assigning a public IP to the router, from which all your traffic will be sent. You can access your router by using this public IP directly. But how can you know the public IP because it changes whenever your router goes for a reboot(most cases). Now either you can ask your ISP to assign you a static public IP address (for which you have to spend some bucks from your pocket) or else you can configure a DDNS.

DDNS (Dynamic Domain Name System) is a method of updating the DNS servers with the public IP of the host, so that whenever your browser send a request for DNS lookup for the host address, the DNS server can respond with the public IP corresponding to the host. Now a days most of the router comes with the DDNS client built in, but in case you have an old router you can install a Dynamic update client in your PC. So that every time your PC comes online, the Dynamic update client will update the DDNS service provider with the public IP. Then your public IP will be updated with the DNS servers by the DDNS service provider.

There are many DDNS service providers which provides free service for 1-3 hosts. For more host names, you have to register for a premium plan. For the demonstration purpose, we will use no-ip as the DDNS service provider and Huawei router for configuration.

First head over to and create a free account. You have to give a specific host name, which you want to use for accessing your router. In the below picture, I have used “myrouter” as the host name and “” as the domain extension. You can choose other extensions if they are available. So my routers address is going to be “”. Fill the remain information needed like email address, name etc. And your account is now created. After logging in, you can see your host names and their corresponding public IP.

How to access a router

Now coming to the router configuration, login to router “” using your username and password.

Most of the routers come with the username and password as “admin”. If your default gateway is not “”, then in cmd prompt, you can check your default gateway using cmd “ipconfig”.

How to access a router

Login to your default gateway using the username and password.

How to access a router

Now in the router window, head over the “Advanced tab”. Look for the DDNS options. Now in the DDNS tab, choose the DDNS service provider (in this case “ ). Enter your host name what you entered while creating noip account (e.g. “myrouter”). Enter the domain name what you have selected while opening a noip account (e.g. “”). Enter your email id and password for your no-ip account. Select the WAN connection which is used to connect to internet (not applicable for all routers). Apply it.

How to access a router

That’s it. Now just reboot your router once. Once your router comes up successfully, you can head over to your noip account and check the host name. Your host name would have been updated with the public IP. Now you can access your router from anywhere using the url what you have used for your router (e.g.

How to access a router

Now for those who don’t see any option in DDNS service provider list, they can download the Dynamic update client from here, which is provided by noip. Then install the dynamic update client in your PC or laptop and you’re done. Every time your PC/Laptop gets connected to the internet, the dynamic update client will do the same job what router does in previous scenario.

For most of the router, access from WAN side is disabled by default (to protect your gateway from being attacked). So If after the above set of configuration, if you’re still not able to access your router from internet, then follow the below instructions.

Find ACL settings in your router configurations page and allow the access via https/http from WAN side. Leave the source IP address and destination IP address blank. Save the configuration and try to access.

How to access a router

How to access a router

Below are some of the DDNS service providers.

This is how you can access your router remotely even when you are not connected to it via LAN or wifi.

Thank you for visiting our page. Got something to ask, let me know via comments.

How to access a router

Source: Windows Central

Sometimes you have to access your router’s settings. Time flies by and you need to upgrade your firmware, or you need to tweak some settings to make your Wi-Fi better, you recently bought a brand-new router to set up, or you just want to see what’s going on in there. Thankfully, accessing your router’s settings is really easy as long as you do the few steps to get you started. Once you’re in, you’ll have a plethora of options and won’t be as confused if anything goes wrong.

Find your router’s IP address via Command Prompt

To access your router’s settings, you need the IP address, which can be found by typing “cmd” in the Windows search bar.

How to access a router

Source: Windows Central

When you have the Command Prompt open, type in “ipconfig” and press Enter.

How to access a router

Source: Windows Central

A huge list of stuff will show up. Don’t panic. Look for the “Default Gateway” entry.

How to access a router

Source: Windows Central

Find your router’s IP address via settings

The other way to find your router’s IP address is to open up Settings in Windows 10.

How to access a router

Source: Windows Central

Then click Network & Internet.

How to access a router

Source: Windows Central

Under Status click View hardware connection properties.

How to access a router

Source: Windows Central

Look through the list of entries and find “Default gateway.” Write down or memorize that number for later!

How to access a router

Source: Windows Central

Access your router’s settings via IP

Take the IP address we just found and type it into a browser URL bar.

How to access a router

Source: Windows Central

That should take you to your router’s login page.

How to access a router

Source: Windows Central

Here is where you need to enter your login credentials. For a lot of routers, the default username is “admin” and the password is blank.

How to access a router

Source: Windows Central

If those don’t work, you can take a look at the router itself for a sticker with that information.

If all else fails, you might need to read your router’s manual or check online for help.

And boom, you have successfully done the work to access your router’s settings. It’s not super hard, but can be a bit confusing if you’re completely new to anything networking. The good news is that with this ability to log into your router, you can change a huge number of settings to make your life easier and the latest devices run faster. Modern routers even have options like the ability to add a VPN service or to enable QoS for better connection speeds with certain applications.

How to access a router

These are the best Netgear routers available now

Love Netgear and want to improve your home internet? We’ve rounded up the best routers available now, whether you’re looking to game, set up a mesh network, or just enjoy lag-free internet in your home.

How to access a router

The best Wi-Fi 6 mesh routers you can buy

Mesh routers can cover fast Wi-Fi connections over a wide area. Here are the best ones to suit all of your needs.

How to access a router

The best gaming routers you can buy

It can be hard to nail down the best gaming routers out there. They need to be fast, low latency, and simple to use. Here are the best gaming routers you can buy right now.